A high performance preoxidized poly(acrylonitrile)(O-PAN)nanofiber membrane with excellent solvent resistance,thermal stability and flexibility was fabricated by the preoxidation of electrospun PAN nanofiber membrane....A high performance preoxidized poly(acrylonitrile)(O-PAN)nanofiber membrane with excellent solvent resistance,thermal stability and flexibility was fabricated by the preoxidation of electrospun PAN nanofiber membrane.The performance of resultant O-PAN nanofiber membrane was optimized by altering the PAN concentration and preoxidation temperature.The results showed that the O-PAN nanofiber membrane which made from PAN concentration of 14%(mass)and preoxidation temperature of 250.0℃ have a more optimal comprehensive performance.In the long-term separation test of SiO2 particle(1 μm)in DMAc suspension,the permeate flux of O-PAN nanofiber membrane stabilized at 227.91 L·m^(-2)·h^(-1)(25℃,0.05 MPa)while the SiO2 rejection above 99.6%,which showed excellent solvent resistance and separation performance.In order to further explore the application of the O-PAN nanofiber membrane,the OPAN nanofiber membrane was treated with fluoride and used in oil/water separation process.The O-PAN nanofiber membrane after hydrophobic treatment showed excellent hydrophobicity and good oil/water separation performance with the permeate flux about 969.59 L·m^(-2)·h^(-1)while the separation efficiency above 96.1%.The O-PAN nanofiber membrane exhibited a potential application prospect in harsh environment separation.展开更多
Membrane separation is a high-efficiency,energy-saving,and environment-friendly separation technology.Covalent organic framework(COF)-based mixed-matrix membranes(MMMs)have broad application prospects in gas separatio...Membrane separation is a high-efficiency,energy-saving,and environment-friendly separation technology.Covalent organic framework(COF)-based mixed-matrix membranes(MMMs)have broad application prospects in gas separation and are expected to provide new solutions for coal-bed methane purification.Herein,a high-throughput screening method is used to calculate and evaluate COF-based MMMs for CH_(4)/N_(2) separation.General design rules are proposed from thermodynamic and kinetic points of view using the computation-ready,experimental COFs.From our database containing 471,671 generated COFs,5 COF membrane materials were screened with excellent membrane selectivities,which were then used as the filler of MMMs for separation performance evaluation.Among them,BAR-NAP-Benzene_CF_(3) combined with polydimethylsiloxane and styrene-b-butadiene-b-styrene show high CH_(4) permeability of 4.43×10^(-13) mol·m·s^(-1)·Pa^(-1)·m^(-2) and high CH_(4)/N_(2) selectivity of 9.54,respectively.The obtained results may provide reasonable information for the design of COF-based membranes for the efficient separation of CH_(4)/N_(2).展开更多
The C.oleifera oil processing industry generates large amounts of solid wastes,including C.oleifera shell(COS)and C.oleifera cake(COC).Distinct from generally acknowledged lignocellulosic biomass(corn stover,bamboo,bi...The C.oleifera oil processing industry generates large amounts of solid wastes,including C.oleifera shell(COS)and C.oleifera cake(COC).Distinct from generally acknowledged lignocellulosic biomass(corn stover,bamboo,birch,etc.),Camellia wastes contain diverse bioactive substances in addition to the abundant lignocellulosic components,and thus,the biorefinery utilization of C.oleifera processing byproducts involves complicated processing technologies.This reviewfirst summarizes various technologies for extracting and converting the main components in C.oleifera oil processing byproducts into value-added chemicals and biobased materials,as well as their potential applications.Microwave,ultrasound,and Soxhlet extractions are compared for the extraction of functional bioactive components(tannin,flavonoid,saponin,etc.),while solvothermal conversion and pyrolysis are discussed for the conversion of lignocellulosic components into value-added chemicals.The application areas of these chemicals according to their properties are introduced in detail,including utilizing antioxidant and anti-in-flammatory properties of the bioactive substances for the specific application,as well as drop-in chemicals for the substitution of unrenewable fossil fuel-derived products.In addition to chemical production,biochar fabricated from COS and its applications in thefields of adsorption,supercapacitor,soil remediation and wood composites are comprehensively reviewed and discussed.Finally,based on the compositions and structural characteristics of C.oleifera byproducts,the development of full-component valorization strategies and the expansion of the appli-cationfields are proposed.展开更多
Lithium-sulfur(Li-S)batteries are considered highly promising as next-generation energy storage systems due to high theoretical capacity(2600 Wh kg^(-1))and energy density(1675 mA h g^(-1))as well as the abundant natu...Lithium-sulfur(Li-S)batteries are considered highly promising as next-generation energy storage systems due to high theoretical capacity(2600 Wh kg^(-1))and energy density(1675 mA h g^(-1))as well as the abundant natural reserves,low cost of elemental sulfur,and environmentally friendly properties.However,several challenges impede its commercialization including low conductivity of sulfur itself,the severe“shuttle effect”caused by lithium polysulfides(LiPSs)during charge–discharge processes,volume expansion effects and sluggish reaction kinetics.As a solution,polar metal particles and their compounds have been introduced as the main hosts for sulfur cathode due to their robust catalytic activity and adsorption capability,effectively suppressing the“shuttle effect”of Li PSs.Bimetallic alloys and their compounds with multi-functional properties exhibit remarkable electrochemical performance more readily when compared to single-metal materials.Well-designed bimetallic materials demonstrate larger specific surface areas and richer active sites,enabling simultaneous high adsorption capability and strong catalytic properties.The synergistic effect of the“adsorption-catalysis”sites accelerates the adsorptiondiffusion-conversion process of Li PSs,ultimately achieving a long-lasting Li-S battery.Herein,the latest progress and performance of bimetallic materials in cathodes,separators,and interlayers of Li-S batteries are systematically reviewed.Firstly,the principles and challenges of Li-S batteries are briefly analyzed.Then,various mechanisms for suppressing“shuttle effects”of Li PSs are emphasized at the microscale.Subsequently,the performance parameters of various bimetallic materials are comprehensively summarized,and some improvement strategies are proposed based on these findings.Finally,the future prospects of bimetallic materials are discussed,with the hope of providing profound insights for the rational design and manufacturing of high-performance bimetallic materials for LSBs.展开更多
Lithium-sulfur battery(LSB)has brought much attention and concern because of high theoretical specific capacity and energy density as one of main competitors for next-generation energy storage systems.The widely comme...Lithium-sulfur battery(LSB)has brought much attention and concern because of high theoretical specific capacity and energy density as one of main competitors for next-generation energy storage systems.The widely commercial application and development of LSB is mainly hindered by serious“shuttle effect”of lithium polysulfides(Li PSs),slow reaction kinetics,notorious lithium dendrites,etc.In various structures of LSB materials,array structured materials,possessing the composition of ordered micro units with the same or similar characteristics of each unit,present excellent application potential for various secondary cells due to some merits such as immobilization of active substances,high specific surface area,appropriate pore sizes,easy modification of functional material surface,accommodated huge volume change,enough facilitated transportation for electrons/lithium ions,and special functional groups strongly adsorbing Li PSs.Thus many novel array structured materials are applied to battery for tackling thorny problems mentioned above.In this review,recent progresses and developments on array structured materials applied in LSBs including preparation ways,collaborative structural designs based on array structures,and action mechanism analyses in improving electrochemical performance and safety are summarized.Meanwhile,we also have detailed discussion for array structured materials in LSBs and constructed the structure-function relationships between array structured materials and battery performances.Lastly,some directions and prospects about preparation ways,functional modifications,and practical applications of array structured materials in LSBs are generalized.We hope the review can attract more researchers'attention and bring more studying on array structured materials for other secondary batteries including LSB.展开更多
With the emergence of some solid electrolytes(SSEs)with high ionic conductivity being comparable to liquid electrolytes,solid-state lithium-sulfur batteries(SSLSBs)have been widely regarded as one of the most promisin...With the emergence of some solid electrolytes(SSEs)with high ionic conductivity being comparable to liquid electrolytes,solid-state lithium-sulfur batteries(SSLSBs)have been widely regarded as one of the most promising candidates for the next generation of power generation energy storage batteries,and have been extensively researched.Though many fundamental and technological issues still need to be resolved to develop commercially viable technologies,SSLSBs using SSEs are expected to address the present limitations and achieve high energy and power density while improving safety,which is very attractive to large-scale energy storage systems.SSLSBs have been developed for many years.However,there are few systematic discussions related to the working mechanism of action of various electrolytes in SSLSBs and the defects and the corresponding solutions of various electrolytes.To fill this gap,it is very meaningful to review the recent progress of SSEs in SSLSBs.In this review,we comprehensively investigate and summarize the application of SSEs in LSBs to determine the differences which still exist between current progresses and real-world requirements,and comprehensively describe the mechanism of action of SSLSBs,including lithium-ion transport,interfacial contact,and catalytic conversion mechanisms.More importantly,the selection of solid electrolyte materials and the novel design of structures are reviewed and the properties of various SSEs are elucidated.Finally,the prospects and possible future research directions of SSLSBs including designing high electronic/ionic conductivity for cathodes,optimizing electrolytes and developing novel electrolytes with excellent properties,improving electrode/-electrolyte interface stability and enhancing interfacial dynamics between electrolyte and anode,using more advanced test equipment and characterization techniques to analyze conduction mechanism of Li^(+)in SSEs are presented.It is hoped that this review can arouse people’s attention and enlighten the development of functional materials and novel structures of SSEs in the next step.展开更多
Lithium metal batteries assembled with solid-state electrolyte can offer high safety and volumetric energy density compared to liquid electrolyte.The polymer solid-state electrolytes of poly(ethylene oxide)(PEO)are wi...Lithium metal batteries assembled with solid-state electrolyte can offer high safety and volumetric energy density compared to liquid electrolyte.The polymer solid-state electrolytes of poly(ethylene oxide)(PEO)are widely used in lithium metal solid-state batteries due to their unique properties.However,there are still some defects such as low ionic conductivity at room temperature and weak inhibition of lithium dendrite growth.Herein,the spiny inorganic nanofibers heterostructure with mullite whiskers grown on the surface of aluminum fluoride(AlF_(3))nanofibers are introduced into the PEOLi TFSI electrolytes for the first time to prepare composite solid-state electrolytes.The AlF_(3)as a strong Lewis acid can adsorb anions and promote the dissociation of Li salts.Besides,the specially threedimensional(3D)structure enlarges the effective contacting interface with the PEO polymer,which allows the lithium ions to be transported not only along the large aspect ratio of AlF3nanofibers,but also along the mullite phase in the transmembrane direction rapidly.Thereby,the transport channel of lithium ions at the spiny inorganic nanofibers-polymer interface is further improved.Benefiting from these advantages,the obtained composite solid-state electrolyte has a high ionic conductivity of 1.58×10^(-4)S cm^(-1)at 30℃and the lithium ions transfer number of 0.53.In addition,the AlF3has strong binding energy with anions,low electronic conductivity and wide electrochemical stability window,and reduced nucleation overpotential of lithium during cycling,which is positive for lithium dendrite suppression in solid-state electrolytes.Thus,the assembled symmetric Li/Li symmetric batteries exhibit stable cycling performance at different area capacities of 0.15,0.2,0.3 and 0.4 m A h cm^(-2).More importantly,the LiFePO_(4)(LFP)/Li battery still has 113.5 m A h g-1remaining after 400 cycles at 50℃and the Coulomb efficiency is nearly 100%during the long cycle.Overall,the interconnected structure of 3D spiny inorganic heterostructure nanofiber constitutes fast and uninterrupted lithium ions transport channels,maximizing the synergistic effect of interfacial transport of inorganic fillers and reducing PEO crystallinity,thus providing a novel approach to high performance solid-state electrolytes.展开更多
3D architecratured transition metal dichalcogenides constructed by atomically thin layers are appealing building blocks in various applications,such as catalysts,energy storage,conversions,sensors,and so on.However,th...3D architecratured transition metal dichalcogenides constructed by atomically thin layers are appealing building blocks in various applications,such as catalysts,energy storage,conversions,sensors,and so on.However,the direct growth of 3D transition metal dichalcogenides architectures with high crystal quality and well-controlled size/thickness remains a huge challenge.Herein,we report a facile,highly-repeatable,and versatile chemical vapor deposition strategy,for the mass production of high-quality 3D-architecratured transition metal dichalcogenides(e.g.,MoS_(2),WS_(2),and ReS_(2))and their alloys(e.g.,W_(x)Mo(1–x)S_(2)and Rex Mo_((1–x))S_(2))nanosheets on naturally abundant and low-cost diatomite templates.Particularly,the purified transition metal dichalcogenides products exhibit unique and designable 3D biomorphic hierarchical microstructures,controllable layer thicknesses,tailorable chemical compositions,and good crystallinities.The weak interlayer interactions endow them with good dispersity in solutions to form stable additive-free inks for solution-processing-based applications,for example,high-permeable and high-stable separation membranes for water purification,and efficient electrocatalysts for hydrogen evolution reactions.This work paves ways for the low-cost,mass production of versatile transition metal dichalcogenides powder-like materials with designable structures and properties,toward energy/environmental-related applications and beyond.展开更多
The different electrocatalytic reactors could be constructed for the electrocatalytic oxidation of 2,2,3,3-tetrafluoro-1-propanol(TFP) with two typical MnO_x/Ti electrodes, i.e.the electrocatalytic membrane reactor(EC...The different electrocatalytic reactors could be constructed for the electrocatalytic oxidation of 2,2,3,3-tetrafluoro-1-propanol(TFP) with two typical MnO_x/Ti electrodes, i.e.the electrocatalytic membrane reactor(ECMR) with the Ti membrane electrode and the electrocatalytic reactor(ECR) with the traditional Ti plate electrode.For the electro-oxidation of TFP, the conversion with membrane electrode(70.1%) in the ECMR was 3.3 and 1.7 times higher than that of the membrane electrode without permeate flow(40.8%) in the ECMR and the plate electrode(21.5%) in the ECR, respectively.Obviously, the pore structure of membrane and convection-enhanced mass transfer in the ECMR dramatically improved the catalytic activity towards the electro-oxidation of TFP.The specific surface area of porous electrode was 2.22 m^2·g^(-1).The surface area of plate electrode was 2.26 cm^2(1.13 cm^2× 2).In addition, the electrochemical results showed that the mass diffusion coefficient of the MnO_x/Ti membrane electrode(1.80 × 10^(-6) cm^2·s^(-1)) could be increased to 6.87 × 10^(-6) cm^2·s^(-1) at the certain flow rate with pump, confirming the lower resistance of mass transfer due to the convection-enhanced mass transfer during the operation of the ECMR.Hence, the porous structure and convection-enhanced mass transfer would improve the electrochemical property of the membrane electrode and the catalytic performance of the ECMR,which could give guideline for the design and application of the porous electrode and electrochemical reactor.展开更多
The structure and performance of membrane materials are very important to the efficient and stable operation in membrane drinking water purification technology. Potassium permanganate(KMnO_4), which can change the cha...The structure and performance of membrane materials are very important to the efficient and stable operation in membrane drinking water purification technology. Potassium permanganate(KMnO_4), which can change the characteristics of organic matters and control membrane surface fouling, has been widely used as pre-oxidant in the front of membrane drinking water process. This study investigates the evolution of membrane surface structure and performance when polyvinylidene fluoride(PVDF) and polyethersulfone(PES) were exposed to10, 100 and 1000 mg·L^(-1) KMnO_4 solution for 6 and 12 d, respectively. The aged membrane physicochemical characteristics such as membrane surface morphology, chemical composition, hydrophilicity, porosity and zeta potential were evaluated by modern analytical and testing instruments. The anti-fouling property of membrane surface was also investigated by the filtration-backwash experiment. The results indicated that the different concentrations and exposure time of KMnO_4 led to a different variation on PVDF and PES membrane surface structure and performance, which could further affect the membrane separation performance and the membrane fouling behaviors. The membrane surface pore size and porosity increased due to the dislodgment and degradation of membrane additive(PVP), which improved membrane permeability and enhanced the adsorption and deposition of pollutants in the membrane pores. With the increase of exposure time, the membrane surface pore size and porosity reduced for the reactions of chain scission and crosslinking on membrane materials, and the backwashing efficiency declined, leading to a more serious irreversible fouling. Compared with PVDF membranes, the formation of sulfonic group for PES membranes increased the negative charge on membrane surface due to the oxidation of KMnO_4. The present study provides some new insights for the regulation of the pre-oxidant dose and the selection of the membrane materials in KMnO_4 pre-oxidation combined with membrane filtration system.展开更多
Foam-like materials had attracted great interest as promising absorbent. In this study, thermoplastic polyurethane(TPU) block sponge was synthesized. Polyester(PET) braid tubular reinforced polyurethane(PU) spongy hol...Foam-like materials had attracted great interest as promising absorbent. In this study, thermoplastic polyurethane(TPU) block sponge was synthesized. Polyester(PET) braid tubular reinforced polyurethane(PU) spongy hollow fiber membrane was prepared by a concentric circular spinning method. The method was woven from an outer coated water-blown PU separation layer and inner PET braid tubular. We have developed a simple and useful preparation technique for the PU spongy hollow fiber membrane. For the first time, the PU spongy hollow fiber membrane was prepared using a coating and controlled foaming technique. The influence of toluene isocyanate index on the physical properties, morphology, and structure of flexible PU sponge was discussed in terms of water contact angle(CA), pure water flux(PWF), Fourier Transform Infrared Analysis(FTIR),pressure-responsive property, and pull-out strength. The morphologies of the membranes were investigated by scanning electron microscopy. We have characterized the foams from an intuitive point of view and demonstrated that the dimensional morphology of the membrane was closely related to isocyanate index. The result showed that the surface cell size of the PU sponge hollow fiber membrane gradually decreased with an increase of the isocyanate index. Due to the elasticity of PU at room temperature, the pressure responsive characteristic of the membrane was prepared. When isocyanate index was 1.05, the interface bonding strength of PU spongy hollow fiber membranes reached as high as 0.37 MPa, porosity and PWF were 71.5% and 415.5 L·m^-2·h^-1,respectively.展开更多
Poly(vinylidene fluoride) /polysulfone(PVDF/PSF) flat blend membrane was prepared via thermally induced phase separation(TIPS) technique.The membrane formation mechanism and membrane structure were investigated and th...Poly(vinylidene fluoride) /polysulfone(PVDF/PSF) flat blend membrane was prepared via thermally induced phase separation(TIPS) technique.The membrane formation mechanism and membrane structure were investigated and the effects of PSF/PVDF weight ratio on morphology,crystallinity,porosity,and mechanical properties of the membrane were discussed.The relationship between membrane structure and performances,such as pure water flux and the rejection of carbonic black,was also discussed.It was found that solid-liquid(S-L) phase separation occurred for the PVDF/PSF/diluent system.The addition of PSF influences structure and crystallinity of the membrane,which in turn influences mechanical properties and performances of the membrane.The results reveal that it is possible to obtain network structure via S-L phase separation by blending the polymer,which has a partial compatibility with PVDF.展开更多
Non-renewable fossil fuels have led to serious problems such as global warming,environmental pollution,etc.Oxygen electrocatalysis including oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)plays a cent...Non-renewable fossil fuels have led to serious problems such as global warming,environmental pollution,etc.Oxygen electrocatalysis including oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)plays a central role in clean energy conversion,enabling a number of sustainable processes for future air battery technologies.Fluorine,as the most electronegative element(4.0)not only can induce more efficient regulation for the electronic structure,but also can bring more abundant defects and other novel effects in materials selection and preparation for favorable catalysis with respect to the other nonmetal elements.However,an individual and comprehensive overview of fluorine-containing functional materials for oxygen electrocatalysis field is still blank.Therefore,it is very meaningful to review the recent progresses of fluorine-containing oxygen electrocatalysts.In this review,we first systematically summarize the controllable preparation methods and their possible development directions based on fluorine-containing materials from four preparation methods.Due to the strong electron-withdrawing properties of fluorine,its control of the electronic structure can effectively enhance the oxygen electrocatalytic activity of the materials.In addition,the catalytic enhancement effect of fluorine on carbonbased materials also includes the prevent oxidation and the layer peeling,and realizes the precise atomic control.And the catalytic improvement mechanism of fluorine containing metal-based compounds also includes the hydration of metal site,the crystal transformation,and the oxygen vacancy induction.Then,based on their various dimensions(0D–3D),we also have summarized the advantages of different morphologies on oxygen electrocatalytic performances.Finally,the prospects and possible future researching direction of F-containing oxygen electrocatalysts are presented(e.g.,novel pathways,advanced methods for measurement and simulation,field assistance and multi-functions).The review is considered valuable and helpful in exploring the novel designs and mechanism analyses of advanced fluorine-containing electrocatalysts.展开更多
With the popularity and widespread applications of electronics,higher demands are being placed on the performance of battery materials.Due to the large difference in electronegativity between fluorine and carbon atoms...With the popularity and widespread applications of electronics,higher demands are being placed on the performance of battery materials.Due to the large difference in electronegativity between fluorine and carbon atoms,doping fluorine atoms in nanocarbon-based materials is considered an effective way to improve the performance of used battery.However,there is still a blank in the systematic review of the mechanism and research progress of fluorine-doped nanostructured carbon materials in various batteries.In this review,the synthetic routes of fluorinated/fluorine-doped nanocarbon-based(CF_x)materials under different fluorine sources and the function mechanism of CF_x in various batteries are reviewed in detail.Subsequently,judging from the dependence between the structure and electrochemical performance of nanocarbon sources,the progress of CF_x based on different dimensions(0D–3D)for primary battery applications is reviewed and the balance between energy density and power density is critically discussed.In addition,the roles of CF_x materials in secondary batteries and their current applications in recent years are summarized in detail to illustrate the effect of introducing F atoms.Finally,we envisage the prospect of CF_x materials and offer some insights and recommendations to facilitate the further exploration of CF_x materials for various high-performance battery applications.展开更多
A functional electrocatalytic membrane reactor(ECMR) was performed for the electrocatalytic oxidation of2,2,3,3-tetrafluoro-l-propanol(TFP) into high value-added sodium 2,2,3,3-tetrafluoropropionate(STFP),A computatio...A functional electrocatalytic membrane reactor(ECMR) was performed for the electrocatalytic oxidation of2,2,3,3-tetrafluoro-l-propanol(TFP) into high value-added sodium 2,2,3,3-tetrafluoropropionate(STFP),A computational fluid dynamics(CFD) technique was applied to simulate the hydrodynamic distributions along a tubular ECMR so as to provide guidance for the design and optimization of ECMR Two-dimensional simulation with porous media model was employed to predict the properties of fluid dynamics in ECMR.The experimental investigation was carried to confirm the CFD simulation.Results showed that a uniform distribution of permeate velocity along the tubular reactor with short length and large diameter could be obtained.TFP conversion of97.7%,the selectivity to STFP of 99.9%and current efficiency of 40.1%were achieved from the ECMR with a length of 40 mm and an inside diameter of 53 mm.The simulations were in good agreement with the experimental results.展开更多
Polysulfone(PSF) is extensively used for the production of ultrafiltration(UF) membranes thanks to its high strength,chemical stability,and good processibility.However,PSF is intrinsically hydrophobic,and hydrophilic ...Polysulfone(PSF) is extensively used for the production of ultrafiltration(UF) membranes thanks to its high strength,chemical stability,and good processibility.However,PSF is intrinsically hydrophobic,and hydrophilic modification is always required to PSF-based membranes if they are intended to be used in aqueous systems.Facile strategies to prepare hydrophilic PSF membranes are thus highly demanded.Herein we spray coat a PSF-based amphiphilic block polymer onto macroporous substrates followed by selective swelling to prepare flat-sheet PSF UF membranes.The polymer is a triblock polymer containing PSF as the majority middle block tethered with shorter block of polyethylene glycol(PEG) on both ends,that is,PEG-b-PSF-b-PEG.We use the technique of spray coa ting to homogeneously dispense diluted triblock polymer solutions on the top of macroporous supports,instantly resulting in uniform,defect-free polymer coating layers with the thickness down to ~1.2 μm.The bi-layered composite structures are then immerged in ethanol/acetone mixture to generate mesoscale pores in the coating layers following the mechanism of selective swelling-induced pore generation,thus producing composite membranes with the mesoporous triblock polymer coating as the selective layers.This facile strategy is free from additional hydrophilic modification and much smaller dosages of polymers are used compared to conventional casting methods.The pore sizes,porositie s,hydrophilicity,and consequently the separation properties of the membranes can be flexibly tuned by changing the swelling duration and the composition of the swelling bath.This strategy combining spray coating and selective swelling is upscalable for the production of highperformance PSF UF membranes.展开更多
Pretreatments of influents using bimetallic catalytic biofilter(BC-biofilter)can help reduce transmembrane pressures.For ultrafiltration membranes coupled with a conventional biofilter pretreatment,the cake layer resi...Pretreatments of influents using bimetallic catalytic biofilter(BC-biofilter)can help reduce transmembrane pressures.For ultrafiltration membranes coupled with a conventional biofilter pretreatment,the cake layer resistance accounts for 25.0%of the total resistance.However,for those coupled with BC-biofilter pretreatment,the cake layer resistance accounts only for 12.5%of the total resistance.Confocal laser scanning microscopy is employed to determine the porosity of cake layer.It is found that ultrafiltration membranes with BC-biofilter pretreatment show a cake layer porosity of up to 0.56 or greater,whereas those with a conventional biofilter pretreatment exhibit a cake layer porosity of only 0.36.This is because micro-flocculation occurs in the effluents of BC-biofilter.The flocs generated through flocculation deposit on membrane surfaces to create highly porous cake layer.Moreover,catalytic reduction can increase the zeta potentials of the biofilter effluents.This makes the deposition of colloidal particles and flocs on membrane surfaces difficult under electrostatic repulsion.Simultaneously,micro-flocculation after BC-biofilter pretreatment can remove colloidal particles with particle sizes of200–350 nm in water.This can effectively prevent the blockage of ultrafiltration membrane pores.Furthermore,compared to conventional biofilter,BC-biofilter pretreatment can more effectively reduce the number of colloidal particles and the van der Waals forces of ultrafiltration membranes.They can also change the action directions of electric double layers and thereby mitigate ultrafiltration membrane fouling.展开更多
Solid-state electrolytes(SSEs),which replace flammable and toxic liquid electrolytes,have attracted widely attention.However,there exist still some challenges in actual application such as poor interfacial compatibili...Solid-state electrolytes(SSEs),which replace flammable and toxic liquid electrolytes,have attracted widely attention.However,there exist still some challenges in actual application such as poor interfacial compatibility and slow ionic migration.In this study,Mg O nanofibers and MgF;nanofibers were prepared via the electro-blow spinning and high-temperature calcination methods,and were applied to all-solid-state lithium metal batteries for the first time.The organic-inorganic composite SSEs exhibited continuous conduction paths based on the virtue of the nanofibers with high length-to-diameter ratio,which were designed and prepared by mixing prepared fillers into the poly(ethylene oxide)(PEO)/lithium bis(trifluoromethane)sulfonilimide(Li TFSI)system.The effect of filler with different morphologies,doping ratios and component on ionic conductivity,electrochemical stability and cycle performance were explored under two kinds of[EO]/[Li^(+)]ratios and ambient temperatures.The ionic conductivities of electrolytes containing Mg O and MgF;nanofibers can reach up to 1.19×10^(-4) and 1.39×10^(-4) S cm^(-1) at 30℃,respectively.They were attributed to specific ionic conductive enhancement at the organicinorganic interface,reduced crystallinity and Lewis acid interaction,which can effectively promote the dissociation of the lithium salts.Especially MgF_(2) nanofiber,combining low electronic conductance,excellent electrochemical stability and outstanding inhibition for lithium dendrites of fluorides,endowed the battery with an initial specific capacity of 140.6 m Ah g^(-1) and capacity decay rate per cycle of 0.055%after500 cycles at 50℃.The work can provide an idea to design SSE with fast and multi-dimensional Li conductive paths and excellent interfacial compatibility.展开更多
The design of membrane pore is critical for membrane preparation. Polyvinylidene fluoride(PVDF) membrane exhibits outstanding properties in the water-treatment field. However, it is a huge challenge to prepare PVDF ma...The design of membrane pore is critical for membrane preparation. Polyvinylidene fluoride(PVDF) membrane exhibits outstanding properties in the water-treatment field. However, it is a huge challenge to prepare PVDF macro-pore plasma separation membrane by non-solvent induced phase separation(NIPS). Herein, a facile strategy is proposed to prepare PVDF macro-pore plasma separation membrane via macromolecular interaction. ATR-FTIR and ^(1)H NMR showed that the intermolecular interaction existed between polyethylene oxide(PEO) and polyvinylpyrrolidone(PVP). It could significantly affect the PVDF macro-pore membrane structure. The maximum pore of the PVDF membrane could be effectively adjusted from small-pore/medium-pore to macro-pore by changing the molecular weight of PEO. The PVDF macro-pore membrane was obtained successfully when PEO-200 k existed with PVP. It exhibited higher plasma separation properties than the currently used plasma separation membrane.Moreover, it had excellent hemocompatibility due to the similar plasma effect, hemolysis, prothrombin time, blood effect and complement C_(3a) effect with the current utilized plasma separation membrane,implying its great potential application. The proposed facile strategy in this work provides a new method to prepare PVDF macro-pore plasma separation membrane by NIPS.展开更多
Alginate is a natural polysaccharide polymer.Hydrogel filtration membranes prepared from alginate show excellent fouling resistance and controllable separation performance,but poor mechanical properties limit the use ...Alginate is a natural polysaccharide polymer.Hydrogel filtration membranes prepared from alginate show excellent fouling resistance and controllable separation performance,but poor mechanical properties limit the use of algae hydrogels.In this study,Ba^(2+)/Ca^(2+)co-crosslinked alginate(Ba/CaAlg)hydrogel membrane was prepared by cross-linking sodium alginate with a blend aqueous solution of barium ions and calcium ions,and the membrane was applied to the separation of dyes/salts from dyeing wastewater.Compared with the CaAlg membrane,the Ba/CaAlg hydrogel membrane exhibited more stable structure,and the mechanical properties and salt tolerance of the membrane were significantly improved.The flux of Ba/CaAlg membrane for methyl blue/sodium chloride mixed solution reached 43.5 L m^(−2) h^(−1),which was significantly higher than that of CaAlg membrane.Besides,the Ba/CaAlg membrane showed higher dye rejection(>99.6%)and lower salt rejection(<8.2%).The structure of Ba/CaAlg membrane was preliminarily simulated by molecular dynamics,and the pore size and distribution of the membrane were calculated.The Ba/CaAlg membrane has a broad application prospect in dyes/salts separation.展开更多
基金supported by the Science and Technology Plans of Tianjin(18PTSYJC00170)the Young Elite Scientists Sponsorship Program by China Association for Science and Technology(YESS20160168)The Analytical&Testing Center of Tiangong University was appreciated.
文摘A high performance preoxidized poly(acrylonitrile)(O-PAN)nanofiber membrane with excellent solvent resistance,thermal stability and flexibility was fabricated by the preoxidation of electrospun PAN nanofiber membrane.The performance of resultant O-PAN nanofiber membrane was optimized by altering the PAN concentration and preoxidation temperature.The results showed that the O-PAN nanofiber membrane which made from PAN concentration of 14%(mass)and preoxidation temperature of 250.0℃ have a more optimal comprehensive performance.In the long-term separation test of SiO2 particle(1 μm)in DMAc suspension,the permeate flux of O-PAN nanofiber membrane stabilized at 227.91 L·m^(-2)·h^(-1)(25℃,0.05 MPa)while the SiO2 rejection above 99.6%,which showed excellent solvent resistance and separation performance.In order to further explore the application of the O-PAN nanofiber membrane,the OPAN nanofiber membrane was treated with fluoride and used in oil/water separation process.The O-PAN nanofiber membrane after hydrophobic treatment showed excellent hydrophobicity and good oil/water separation performance with the permeate flux about 969.59 L·m^(-2)·h^(-1)while the separation efficiency above 96.1%.The O-PAN nanofiber membrane exhibited a potential application prospect in harsh environment separation.
基金financially supported by the National Key Research & Development Program of China (2021YFB3802200)the National Natural Science Foundation of China (Nos. 22078004 and 21978005)
文摘Membrane separation is a high-efficiency,energy-saving,and environment-friendly separation technology.Covalent organic framework(COF)-based mixed-matrix membranes(MMMs)have broad application prospects in gas separation and are expected to provide new solutions for coal-bed methane purification.Herein,a high-throughput screening method is used to calculate and evaluate COF-based MMMs for CH_(4)/N_(2) separation.General design rules are proposed from thermodynamic and kinetic points of view using the computation-ready,experimental COFs.From our database containing 471,671 generated COFs,5 COF membrane materials were screened with excellent membrane selectivities,which were then used as the filler of MMMs for separation performance evaluation.Among them,BAR-NAP-Benzene_CF_(3) combined with polydimethylsiloxane and styrene-b-butadiene-b-styrene show high CH_(4) permeability of 4.43×10^(-13) mol·m·s^(-1)·Pa^(-1)·m^(-2) and high CH_(4)/N_(2) selectivity of 9.54,respectively.The obtained results may provide reasonable information for the design of COF-based membranes for the efficient separation of CH_(4)/N_(2).
基金The authors acknowledge the financial support from the National Natural Science Foundation of China(Grant No.32201509)Hunan Science and Technology Xiaohe Talent Support Project(2022 TJ-XH 013)+6 种基金Science and Technology Innovation Program of Hunan Province(2022RC1156,2021RC2100)State Key Laboratory of Woody Oil Resource Utilization Common Key Technology Innovation for the Green Transformation of Woody Oil(XLKY202205)State Key Laboratory of Woody Oil Resource Utilization Project(2019XK2002)Key Research and Development Program of the State Forestry and Grassland Administration(GLM[2021]95)Hunan Forestry Outstanding Youth Project(XLK202108-1)Changsha Science and Technology Project(kq2202325,kq2107022)Science and Technology Innovation Leading Talent of Hunan Province(2020RC4026).
文摘The C.oleifera oil processing industry generates large amounts of solid wastes,including C.oleifera shell(COS)and C.oleifera cake(COC).Distinct from generally acknowledged lignocellulosic biomass(corn stover,bamboo,birch,etc.),Camellia wastes contain diverse bioactive substances in addition to the abundant lignocellulosic components,and thus,the biorefinery utilization of C.oleifera processing byproducts involves complicated processing technologies.This reviewfirst summarizes various technologies for extracting and converting the main components in C.oleifera oil processing byproducts into value-added chemicals and biobased materials,as well as their potential applications.Microwave,ultrasound,and Soxhlet extractions are compared for the extraction of functional bioactive components(tannin,flavonoid,saponin,etc.),while solvothermal conversion and pyrolysis are discussed for the conversion of lignocellulosic components into value-added chemicals.The application areas of these chemicals according to their properties are introduced in detail,including utilizing antioxidant and anti-in-flammatory properties of the bioactive substances for the specific application,as well as drop-in chemicals for the substitution of unrenewable fossil fuel-derived products.In addition to chemical production,biochar fabricated from COS and its applications in thefields of adsorption,supercapacitor,soil remediation and wood composites are comprehensively reviewed and discussed.Finally,based on the compositions and structural characteristics of C.oleifera byproducts,the development of full-component valorization strategies and the expansion of the appli-cationfields are proposed.
基金supported by the National Natural Science Foundation of China (52203066,51973157,61904123)the Tianjin Natural Science Foundation (18JCQNJC02900)+3 种基金National innovation and entrepreneurship training program for college students (202310058007)Tianjin Municipal college students’innovation and entrepreneurship training program (202310058088)the Science&Technology Development Fund of Tianjin Education Commission for Higher Education (Grant No.2018KJ196)State Key Laboratory of Membrane and Membrane Separation,Tiangong University。
文摘Lithium-sulfur(Li-S)batteries are considered highly promising as next-generation energy storage systems due to high theoretical capacity(2600 Wh kg^(-1))and energy density(1675 mA h g^(-1))as well as the abundant natural reserves,low cost of elemental sulfur,and environmentally friendly properties.However,several challenges impede its commercialization including low conductivity of sulfur itself,the severe“shuttle effect”caused by lithium polysulfides(LiPSs)during charge–discharge processes,volume expansion effects and sluggish reaction kinetics.As a solution,polar metal particles and their compounds have been introduced as the main hosts for sulfur cathode due to their robust catalytic activity and adsorption capability,effectively suppressing the“shuttle effect”of Li PSs.Bimetallic alloys and their compounds with multi-functional properties exhibit remarkable electrochemical performance more readily when compared to single-metal materials.Well-designed bimetallic materials demonstrate larger specific surface areas and richer active sites,enabling simultaneous high adsorption capability and strong catalytic properties.The synergistic effect of the“adsorption-catalysis”sites accelerates the adsorptiondiffusion-conversion process of Li PSs,ultimately achieving a long-lasting Li-S battery.Herein,the latest progress and performance of bimetallic materials in cathodes,separators,and interlayers of Li-S batteries are systematically reviewed.Firstly,the principles and challenges of Li-S batteries are briefly analyzed.Then,various mechanisms for suppressing“shuttle effects”of Li PSs are emphasized at the microscale.Subsequently,the performance parameters of various bimetallic materials are comprehensively summarized,and some improvement strategies are proposed based on these findings.Finally,the future prospects of bimetallic materials are discussed,with the hope of providing profound insights for the rational design and manufacturing of high-performance bimetallic materials for LSBs.
基金This work was supported by the National Natural Science Foundation of China(52203066,51973157,61904123)the Tianjin Natural Science Foundation(18JCQNJC02900)+3 种基金the National innovation and entrepreneurship training program for college students(202310058007)the Tianjin Municipal college students’innovation and entrepreneurship training program(202310058088)the Science&Technology Development Fund of Tianjin Education Commission for Higher Education(Grant No.2018KJ196)the State Key Laboratory of Membrane and Membrane Separation,Tiangong University.
文摘Lithium-sulfur battery(LSB)has brought much attention and concern because of high theoretical specific capacity and energy density as one of main competitors for next-generation energy storage systems.The widely commercial application and development of LSB is mainly hindered by serious“shuttle effect”of lithium polysulfides(Li PSs),slow reaction kinetics,notorious lithium dendrites,etc.In various structures of LSB materials,array structured materials,possessing the composition of ordered micro units with the same or similar characteristics of each unit,present excellent application potential for various secondary cells due to some merits such as immobilization of active substances,high specific surface area,appropriate pore sizes,easy modification of functional material surface,accommodated huge volume change,enough facilitated transportation for electrons/lithium ions,and special functional groups strongly adsorbing Li PSs.Thus many novel array structured materials are applied to battery for tackling thorny problems mentioned above.In this review,recent progresses and developments on array structured materials applied in LSBs including preparation ways,collaborative structural designs based on array structures,and action mechanism analyses in improving electrochemical performance and safety are summarized.Meanwhile,we also have detailed discussion for array structured materials in LSBs and constructed the structure-function relationships between array structured materials and battery performances.Lastly,some directions and prospects about preparation ways,functional modifications,and practical applications of array structured materials in LSBs are generalized.We hope the review can attract more researchers'attention and bring more studying on array structured materials for other secondary batteries including LSB.
基金supported by the National Natural Science Foundation of China(52203066,51973157,51673148,51678411)the Science and Technology Plans of Tianjin,China(19PTSYJC00010)+3 种基金the China Postdoctoral Science Foundation Grant(2019M651047)the Tianjin Research Innovation Project for Postgraduate Students,China(2020YJSB062)the Tianjin Municipal college student’innovation and entrepreneurship training program,China(202110058052)the National innovation and entrepreneurship training program for college students,China(202110058017)。
文摘With the emergence of some solid electrolytes(SSEs)with high ionic conductivity being comparable to liquid electrolytes,solid-state lithium-sulfur batteries(SSLSBs)have been widely regarded as one of the most promising candidates for the next generation of power generation energy storage batteries,and have been extensively researched.Though many fundamental and technological issues still need to be resolved to develop commercially viable technologies,SSLSBs using SSEs are expected to address the present limitations and achieve high energy and power density while improving safety,which is very attractive to large-scale energy storage systems.SSLSBs have been developed for many years.However,there are few systematic discussions related to the working mechanism of action of various electrolytes in SSLSBs and the defects and the corresponding solutions of various electrolytes.To fill this gap,it is very meaningful to review the recent progress of SSEs in SSLSBs.In this review,we comprehensively investigate and summarize the application of SSEs in LSBs to determine the differences which still exist between current progresses and real-world requirements,and comprehensively describe the mechanism of action of SSLSBs,including lithium-ion transport,interfacial contact,and catalytic conversion mechanisms.More importantly,the selection of solid electrolyte materials and the novel design of structures are reviewed and the properties of various SSEs are elucidated.Finally,the prospects and possible future research directions of SSLSBs including designing high electronic/ionic conductivity for cathodes,optimizing electrolytes and developing novel electrolytes with excellent properties,improving electrode/-electrolyte interface stability and enhancing interfacial dynamics between electrolyte and anode,using more advanced test equipment and characterization techniques to analyze conduction mechanism of Li^(+)in SSEs are presented.It is hoped that this review can arouse people’s attention and enlighten the development of functional materials and novel structures of SSEs in the next step.
基金supported by the National Natural Science Foundation of China(51973157,61904123,52103061,52203066)the Science&Technology Development Fund of Tianjin Education Commission for Higher Education(2018KJ196)+3 种基金the project funded by China Postdoctoral Science Foundation(2021T140419)Tianjin Municipal College Student’Innovation and Entrepreneurship Training Program(202110058052)the National Innovation and Entrepreneurship Training Program for College Students(202110058017)the State Key Laboratory of Membrane and Membrane Separation,Tiangong University。
文摘Lithium metal batteries assembled with solid-state electrolyte can offer high safety and volumetric energy density compared to liquid electrolyte.The polymer solid-state electrolytes of poly(ethylene oxide)(PEO)are widely used in lithium metal solid-state batteries due to their unique properties.However,there are still some defects such as low ionic conductivity at room temperature and weak inhibition of lithium dendrite growth.Herein,the spiny inorganic nanofibers heterostructure with mullite whiskers grown on the surface of aluminum fluoride(AlF_(3))nanofibers are introduced into the PEOLi TFSI electrolytes for the first time to prepare composite solid-state electrolytes.The AlF_(3)as a strong Lewis acid can adsorb anions and promote the dissociation of Li salts.Besides,the specially threedimensional(3D)structure enlarges the effective contacting interface with the PEO polymer,which allows the lithium ions to be transported not only along the large aspect ratio of AlF3nanofibers,but also along the mullite phase in the transmembrane direction rapidly.Thereby,the transport channel of lithium ions at the spiny inorganic nanofibers-polymer interface is further improved.Benefiting from these advantages,the obtained composite solid-state electrolyte has a high ionic conductivity of 1.58×10^(-4)S cm^(-1)at 30℃and the lithium ions transfer number of 0.53.In addition,the AlF3has strong binding energy with anions,low electronic conductivity and wide electrochemical stability window,and reduced nucleation overpotential of lithium during cycling,which is positive for lithium dendrite suppression in solid-state electrolytes.Thus,the assembled symmetric Li/Li symmetric batteries exhibit stable cycling performance at different area capacities of 0.15,0.2,0.3 and 0.4 m A h cm^(-2).More importantly,the LiFePO_(4)(LFP)/Li battery still has 113.5 m A h g-1remaining after 400 cycles at 50℃and the Coulomb efficiency is nearly 100%during the long cycle.Overall,the interconnected structure of 3D spiny inorganic heterostructure nanofiber constitutes fast and uninterrupted lithium ions transport channels,maximizing the synergistic effect of interfacial transport of inorganic fillers and reducing PEO crystallinity,thus providing a novel approach to high performance solid-state electrolytes.
基金supported by the National Natural Science Foundation of China(Nos.52021006,51925201,51991344,51991340)the National Key Research and Development Program of China(No.2018YFA0703700)+1 种基金the Beijing Natural Science Foundation(No.2192021)the China Postdoctoral Science Foundation(No.2021M690195).
文摘3D architecratured transition metal dichalcogenides constructed by atomically thin layers are appealing building blocks in various applications,such as catalysts,energy storage,conversions,sensors,and so on.However,the direct growth of 3D transition metal dichalcogenides architectures with high crystal quality and well-controlled size/thickness remains a huge challenge.Herein,we report a facile,highly-repeatable,and versatile chemical vapor deposition strategy,for the mass production of high-quality 3D-architecratured transition metal dichalcogenides(e.g.,MoS_(2),WS_(2),and ReS_(2))and their alloys(e.g.,W_(x)Mo(1–x)S_(2)and Rex Mo_((1–x))S_(2))nanosheets on naturally abundant and low-cost diatomite templates.Particularly,the purified transition metal dichalcogenides products exhibit unique and designable 3D biomorphic hierarchical microstructures,controllable layer thicknesses,tailorable chemical compositions,and good crystallinities.The weak interlayer interactions endow them with good dispersity in solutions to form stable additive-free inks for solution-processing-based applications,for example,high-permeable and high-stable separation membranes for water purification,and efficient electrocatalysts for hydrogen evolution reactions.This work paves ways for the low-cost,mass production of versatile transition metal dichalcogenides powder-like materials with designable structures and properties,toward energy/environmental-related applications and beyond.
基金Supported by the National Natural Science Foundation of China(21676200,21576208)the Program for Innovative Research Team in University of Ministry of Education of China(IRT-17R80)+2 种基金the Science and Technology Plans of Tianjin(17JCYBJC19800)111 Project(B12015)College Students' Innovation and Entrepreneurship Project(201510058083)
文摘The different electrocatalytic reactors could be constructed for the electrocatalytic oxidation of 2,2,3,3-tetrafluoro-1-propanol(TFP) with two typical MnO_x/Ti electrodes, i.e.the electrocatalytic membrane reactor(ECMR) with the Ti membrane electrode and the electrocatalytic reactor(ECR) with the traditional Ti plate electrode.For the electro-oxidation of TFP, the conversion with membrane electrode(70.1%) in the ECMR was 3.3 and 1.7 times higher than that of the membrane electrode without permeate flow(40.8%) in the ECMR and the plate electrode(21.5%) in the ECR, respectively.Obviously, the pore structure of membrane and convection-enhanced mass transfer in the ECMR dramatically improved the catalytic activity towards the electro-oxidation of TFP.The specific surface area of porous electrode was 2.22 m^2·g^(-1).The surface area of plate electrode was 2.26 cm^2(1.13 cm^2× 2).In addition, the electrochemical results showed that the mass diffusion coefficient of the MnO_x/Ti membrane electrode(1.80 × 10^(-6) cm^2·s^(-1)) could be increased to 6.87 × 10^(-6) cm^2·s^(-1) at the certain flow rate with pump, confirming the lower resistance of mass transfer due to the convection-enhanced mass transfer during the operation of the ECMR.Hence, the porous structure and convection-enhanced mass transfer would improve the electrochemical property of the membrane electrode and the catalytic performance of the ECMR,which could give guideline for the design and application of the porous electrode and electrochemical reactor.
基金Supported by the National Natural Science Foundation of China(51578374,51678410)Higher Education Science and Technology Development Foundation Planning Project of Tianjin,China(20140517)
文摘The structure and performance of membrane materials are very important to the efficient and stable operation in membrane drinking water purification technology. Potassium permanganate(KMnO_4), which can change the characteristics of organic matters and control membrane surface fouling, has been widely used as pre-oxidant in the front of membrane drinking water process. This study investigates the evolution of membrane surface structure and performance when polyvinylidene fluoride(PVDF) and polyethersulfone(PES) were exposed to10, 100 and 1000 mg·L^(-1) KMnO_4 solution for 6 and 12 d, respectively. The aged membrane physicochemical characteristics such as membrane surface morphology, chemical composition, hydrophilicity, porosity and zeta potential were evaluated by modern analytical and testing instruments. The anti-fouling property of membrane surface was also investigated by the filtration-backwash experiment. The results indicated that the different concentrations and exposure time of KMnO_4 led to a different variation on PVDF and PES membrane surface structure and performance, which could further affect the membrane separation performance and the membrane fouling behaviors. The membrane surface pore size and porosity increased due to the dislodgment and degradation of membrane additive(PVP), which improved membrane permeability and enhanced the adsorption and deposition of pollutants in the membrane pores. With the increase of exposure time, the membrane surface pore size and porosity reduced for the reactions of chain scission and crosslinking on membrane materials, and the backwashing efficiency declined, leading to a more serious irreversible fouling. Compared with PVDF membranes, the formation of sulfonic group for PES membranes increased the negative charge on membrane surface due to the oxidation of KMnO_4. The present study provides some new insights for the regulation of the pre-oxidant dose and the selection of the membrane materials in KMnO_4 pre-oxidation combined with membrane filtration system.
基金funded by the National Natural Science Foundation of China (51673149, 51603146)Industrial innovation project of TJOA (BHSF2017-01)
文摘Foam-like materials had attracted great interest as promising absorbent. In this study, thermoplastic polyurethane(TPU) block sponge was synthesized. Polyester(PET) braid tubular reinforced polyurethane(PU) spongy hollow fiber membrane was prepared by a concentric circular spinning method. The method was woven from an outer coated water-blown PU separation layer and inner PET braid tubular. We have developed a simple and useful preparation technique for the PU spongy hollow fiber membrane. For the first time, the PU spongy hollow fiber membrane was prepared using a coating and controlled foaming technique. The influence of toluene isocyanate index on the physical properties, morphology, and structure of flexible PU sponge was discussed in terms of water contact angle(CA), pure water flux(PWF), Fourier Transform Infrared Analysis(FTIR),pressure-responsive property, and pull-out strength. The morphologies of the membranes were investigated by scanning electron microscopy. We have characterized the foams from an intuitive point of view and demonstrated that the dimensional morphology of the membrane was closely related to isocyanate index. The result showed that the surface cell size of the PU sponge hollow fiber membrane gradually decreased with an increase of the isocyanate index. Due to the elasticity of PU at room temperature, the pressure responsive characteristic of the membrane was prepared. When isocyanate index was 1.05, the interface bonding strength of PU spongy hollow fiber membranes reached as high as 0.37 MPa, porosity and PWF were 71.5% and 415.5 L·m^-2·h^-1,respectively.
基金National Natural Foundation of China(No.51003074)
文摘Poly(vinylidene fluoride) /polysulfone(PVDF/PSF) flat blend membrane was prepared via thermally induced phase separation(TIPS) technique.The membrane formation mechanism and membrane structure were investigated and the effects of PSF/PVDF weight ratio on morphology,crystallinity,porosity,and mechanical properties of the membrane were discussed.The relationship between membrane structure and performances,such as pure water flux and the rejection of carbonic black,was also discussed.It was found that solid-liquid(S-L) phase separation occurred for the PVDF/PSF/diluent system.The addition of PSF influences structure and crystallinity of the membrane,which in turn influences mechanical properties and performances of the membrane.The results reveal that it is possible to obtain network structure via S-L phase separation by blending the polymer,which has a partial compatibility with PVDF.
基金supported by the National Natural Science Foundation of China,China(52203066,51973157,51673148 and 51678411)the Science and Technology Plans of Tianjin,China(19PTSYJC00010)+3 种基金China Postdoctoral Science Foundation Grant,China(2019M651047)the Tianjin Research Innovation Project for Postgraduate Students,China(2020YJSB062)the Tianjin Municipal College Student’Innovation And Entrepreneurship Training Program,China(202110058052)the National Innovation and Entrepreneurship Training Program for College Students,China(202110058017)。
文摘Non-renewable fossil fuels have led to serious problems such as global warming,environmental pollution,etc.Oxygen electrocatalysis including oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)plays a central role in clean energy conversion,enabling a number of sustainable processes for future air battery technologies.Fluorine,as the most electronegative element(4.0)not only can induce more efficient regulation for the electronic structure,but also can bring more abundant defects and other novel effects in materials selection and preparation for favorable catalysis with respect to the other nonmetal elements.However,an individual and comprehensive overview of fluorine-containing functional materials for oxygen electrocatalysis field is still blank.Therefore,it is very meaningful to review the recent progresses of fluorine-containing oxygen electrocatalysts.In this review,we first systematically summarize the controllable preparation methods and their possible development directions based on fluorine-containing materials from four preparation methods.Due to the strong electron-withdrawing properties of fluorine,its control of the electronic structure can effectively enhance the oxygen electrocatalytic activity of the materials.In addition,the catalytic enhancement effect of fluorine on carbonbased materials also includes the prevent oxidation and the layer peeling,and realizes the precise atomic control.And the catalytic improvement mechanism of fluorine containing metal-based compounds also includes the hydration of metal site,the crystal transformation,and the oxygen vacancy induction.Then,based on their various dimensions(0D–3D),we also have summarized the advantages of different morphologies on oxygen electrocatalytic performances.Finally,the prospects and possible future researching direction of F-containing oxygen electrocatalysts are presented(e.g.,novel pathways,advanced methods for measurement and simulation,field assistance and multi-functions).The review is considered valuable and helpful in exploring the novel designs and mechanism analyses of advanced fluorine-containing electrocatalysts.
基金supported by the National Natural Science Foundation of China(51973157,61904123,52103061,52203066)the Science&Technology Development Fund of Tianjin Education Commission for Higher Education(2018KJ196)+3 种基金the project funded by China Postdoctoral Science Foundation(2021T140419)Tianjin Municipal College Student’Innovation and Entrepreneurship Training Program(202110058052)the National Innovation and Entrepreneurship Training Program for College Students(202110058017)the State Key Laboratory of Membrane and Membrane Separation,Tiangong University。
文摘With the popularity and widespread applications of electronics,higher demands are being placed on the performance of battery materials.Due to the large difference in electronegativity between fluorine and carbon atoms,doping fluorine atoms in nanocarbon-based materials is considered an effective way to improve the performance of used battery.However,there is still a blank in the systematic review of the mechanism and research progress of fluorine-doped nanostructured carbon materials in various batteries.In this review,the synthetic routes of fluorinated/fluorine-doped nanocarbon-based(CF_x)materials under different fluorine sources and the function mechanism of CF_x in various batteries are reviewed in detail.Subsequently,judging from the dependence between the structure and electrochemical performance of nanocarbon sources,the progress of CF_x based on different dimensions(0D–3D)for primary battery applications is reviewed and the balance between energy density and power density is critically discussed.In addition,the roles of CF_x materials in secondary batteries and their current applications in recent years are summarized in detail to illustrate the effect of introducing F atoms.Finally,we envisage the prospect of CF_x materials and offer some insights and recommendations to facilitate the further exploration of CF_x materials for various high-performance battery applications.
基金Supported by the National Natural Science Foundation of China(21206119 and21576208)the Program for Changjiang Scholars and Innovative Research Team in University of Ministry of Education of China(IRT13084)
文摘A functional electrocatalytic membrane reactor(ECMR) was performed for the electrocatalytic oxidation of2,2,3,3-tetrafluoro-l-propanol(TFP) into high value-added sodium 2,2,3,3-tetrafluoropropionate(STFP),A computational fluid dynamics(CFD) technique was applied to simulate the hydrodynamic distributions along a tubular ECMR so as to provide guidance for the design and optimization of ECMR Two-dimensional simulation with porous media model was employed to predict the properties of fluid dynamics in ECMR.The experimental investigation was carried to confirm the CFD simulation.Results showed that a uniform distribution of permeate velocity along the tubular reactor with short length and large diameter could be obtained.TFP conversion of97.7%,the selectivity to STFP of 99.9%and current efficiency of 40.1%were achieved from the ECMR with a length of 40 mm and an inside diameter of 53 mm.The simulations were in good agreement with the experimental results.
基金Financial support from the National Natural Science Foundation of China (21706119)the Program of Excellent Innovation Teams of Jiangsu Higher Education Institutions+1 种基金the Project of Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)the partial support by the Open Fund of State Key Laboratory of Separation Membranes and Membrane Process (M1-201702)。
文摘Polysulfone(PSF) is extensively used for the production of ultrafiltration(UF) membranes thanks to its high strength,chemical stability,and good processibility.However,PSF is intrinsically hydrophobic,and hydrophilic modification is always required to PSF-based membranes if they are intended to be used in aqueous systems.Facile strategies to prepare hydrophilic PSF membranes are thus highly demanded.Herein we spray coat a PSF-based amphiphilic block polymer onto macroporous substrates followed by selective swelling to prepare flat-sheet PSF UF membranes.The polymer is a triblock polymer containing PSF as the majority middle block tethered with shorter block of polyethylene glycol(PEG) on both ends,that is,PEG-b-PSF-b-PEG.We use the technique of spray coa ting to homogeneously dispense diluted triblock polymer solutions on the top of macroporous supports,instantly resulting in uniform,defect-free polymer coating layers with the thickness down to ~1.2 μm.The bi-layered composite structures are then immerged in ethanol/acetone mixture to generate mesoscale pores in the coating layers following the mechanism of selective swelling-induced pore generation,thus producing composite membranes with the mesoporous triblock polymer coating as the selective layers.This facile strategy is free from additional hydrophilic modification and much smaller dosages of polymers are used compared to conventional casting methods.The pore sizes,porositie s,hydrophilicity,and consequently the separation properties of the membranes can be flexibly tuned by changing the swelling duration and the composition of the swelling bath.This strategy combining spray coating and selective swelling is upscalable for the production of highperformance PSF UF membranes.
基金financially supported by the National Natural Science Foundation of China(No.51638011,No.51678410,No.51878448,No.51578374)National Program on Key Research Project[No.YS2017YFGH000386]+1 种基金Tianjin Science and Technology Plan Project[No.16PTGCCX00070]the support of Tianjin Education Council,the Key of Science and Technology Plan Project(No.2019ZD06)。
文摘Pretreatments of influents using bimetallic catalytic biofilter(BC-biofilter)can help reduce transmembrane pressures.For ultrafiltration membranes coupled with a conventional biofilter pretreatment,the cake layer resistance accounts for 25.0%of the total resistance.However,for those coupled with BC-biofilter pretreatment,the cake layer resistance accounts only for 12.5%of the total resistance.Confocal laser scanning microscopy is employed to determine the porosity of cake layer.It is found that ultrafiltration membranes with BC-biofilter pretreatment show a cake layer porosity of up to 0.56 or greater,whereas those with a conventional biofilter pretreatment exhibit a cake layer porosity of only 0.36.This is because micro-flocculation occurs in the effluents of BC-biofilter.The flocs generated through flocculation deposit on membrane surfaces to create highly porous cake layer.Moreover,catalytic reduction can increase the zeta potentials of the biofilter effluents.This makes the deposition of colloidal particles and flocs on membrane surfaces difficult under electrostatic repulsion.Simultaneously,micro-flocculation after BC-biofilter pretreatment can remove colloidal particles with particle sizes of200–350 nm in water.This can effectively prevent the blockage of ultrafiltration membrane pores.Furthermore,compared to conventional biofilter,BC-biofilter pretreatment can more effectively reduce the number of colloidal particles and the van der Waals forces of ultrafiltration membranes.They can also change the action directions of electric double layers and thereby mitigate ultrafiltration membrane fouling.
基金supported by the National Natural Science Foundation of China(grant No.51973157)the Special Grade of the Financial Support from the China Postdoctoral Science Foundation(grant No.2020T130469)+2 种基金the Tianjin Municipal University Students’Innovation and Entrepreneurship Training Program Project(grant No.201910058036)the Science and Technology Plans of Tianjin(grant No.19PTSYJC00010)the Science&Technology Development Fund of Tianjin Education Commission for Higher Education(grant No.2018KJ196)。
文摘Solid-state electrolytes(SSEs),which replace flammable and toxic liquid electrolytes,have attracted widely attention.However,there exist still some challenges in actual application such as poor interfacial compatibility and slow ionic migration.In this study,Mg O nanofibers and MgF;nanofibers were prepared via the electro-blow spinning and high-temperature calcination methods,and were applied to all-solid-state lithium metal batteries for the first time.The organic-inorganic composite SSEs exhibited continuous conduction paths based on the virtue of the nanofibers with high length-to-diameter ratio,which were designed and prepared by mixing prepared fillers into the poly(ethylene oxide)(PEO)/lithium bis(trifluoromethane)sulfonilimide(Li TFSI)system.The effect of filler with different morphologies,doping ratios and component on ionic conductivity,electrochemical stability and cycle performance were explored under two kinds of[EO]/[Li^(+)]ratios and ambient temperatures.The ionic conductivities of electrolytes containing Mg O and MgF;nanofibers can reach up to 1.19×10^(-4) and 1.39×10^(-4) S cm^(-1) at 30℃,respectively.They were attributed to specific ionic conductive enhancement at the organicinorganic interface,reduced crystallinity and Lewis acid interaction,which can effectively promote the dissociation of the lithium salts.Especially MgF_(2) nanofiber,combining low electronic conductance,excellent electrochemical stability and outstanding inhibition for lithium dendrites of fluorides,endowed the battery with an initial specific capacity of 140.6 m Ah g^(-1) and capacity decay rate per cycle of 0.055%after500 cycles at 50℃.The work can provide an idea to design SSE with fast and multi-dimensional Li conductive paths and excellent interfacial compatibility.
基金the National Natural Science Foundation of China (21776216)Tianjin Key Laboratory Project (16PTSYJC00210)+3 种基金Program for Innovative Research Team in University of Tianjin (TD13-5044)Science and technology support project of Tianjin (20YFZCSY00310, 21ZXGWSY00040)State Key Laboratory of Separation Membranes and Membrane Processes (Tiangong University), Youth Science Foundation of Tianjin (21JCQNJC00100)Tianjin Health Science and Technology Project (TJWJ2021MS014)。
文摘The design of membrane pore is critical for membrane preparation. Polyvinylidene fluoride(PVDF) membrane exhibits outstanding properties in the water-treatment field. However, it is a huge challenge to prepare PVDF macro-pore plasma separation membrane by non-solvent induced phase separation(NIPS). Herein, a facile strategy is proposed to prepare PVDF macro-pore plasma separation membrane via macromolecular interaction. ATR-FTIR and ^(1)H NMR showed that the intermolecular interaction existed between polyethylene oxide(PEO) and polyvinylpyrrolidone(PVP). It could significantly affect the PVDF macro-pore membrane structure. The maximum pore of the PVDF membrane could be effectively adjusted from small-pore/medium-pore to macro-pore by changing the molecular weight of PEO. The PVDF macro-pore membrane was obtained successfully when PEO-200 k existed with PVP. It exhibited higher plasma separation properties than the currently used plasma separation membrane.Moreover, it had excellent hemocompatibility due to the similar plasma effect, hemolysis, prothrombin time, blood effect and complement C_(3a) effect with the current utilized plasma separation membrane,implying its great potential application. The proposed facile strategy in this work provides a new method to prepare PVDF macro-pore plasma separation membrane by NIPS.
基金supported by the National Natural Science Foundation of China(No.22078244)Scientific research and development project of SINOPEC(No.222443)the Science and Technology Plans of Tianjin(No.20JCYBJC00120).
文摘Alginate is a natural polysaccharide polymer.Hydrogel filtration membranes prepared from alginate show excellent fouling resistance and controllable separation performance,but poor mechanical properties limit the use of algae hydrogels.In this study,Ba^(2+)/Ca^(2+)co-crosslinked alginate(Ba/CaAlg)hydrogel membrane was prepared by cross-linking sodium alginate with a blend aqueous solution of barium ions and calcium ions,and the membrane was applied to the separation of dyes/salts from dyeing wastewater.Compared with the CaAlg membrane,the Ba/CaAlg hydrogel membrane exhibited more stable structure,and the mechanical properties and salt tolerance of the membrane were significantly improved.The flux of Ba/CaAlg membrane for methyl blue/sodium chloride mixed solution reached 43.5 L m^(−2) h^(−1),which was significantly higher than that of CaAlg membrane.Besides,the Ba/CaAlg membrane showed higher dye rejection(>99.6%)and lower salt rejection(<8.2%).The structure of Ba/CaAlg membrane was preliminarily simulated by molecular dynamics,and the pore size and distribution of the membrane were calculated.The Ba/CaAlg membrane has a broad application prospect in dyes/salts separation.