A self-made single-roll stirring (SRS) machine was used to manufacturesemisolid A2017 alloy, the mechanism of A2017 alloy formation was investigated. It was shown thatA2017 dendrites growing on the rough roll surface ...A self-made single-roll stirring (SRS) machine was used to manufacturesemisolid A2017 alloy, the mechanism of A2017 alloy formation was investigated. It was shown thatA2017 dendrites growing on the rough roll surface are crashed into fragments by the roll, which moveand grow freely then contribute the formation of finer spherical microstruc-ture. When casting at710-750℃, fine and homogeneous spherical or elliptical grains of A2017 alloy were obtained.Extending forming mould has been designed and was installed at the exit of roll-shoe gap. A2017alloy was formed by extending continuously at the semisolid state on SRS machine. Throughcontrolling pouring temperature, semisolid forming and extending extrusion was combined organically.A2017 product with fine surface and rectangular transection of 14 mm x 25 mm was obtained. Bycontrast to the national standard, the fracture strength and elongation of A2017 products producedfrom extending semisolid extrusion have been improved with an increase of 100 MPa and 29%,respectively.展开更多
In order to establish precision model, a software to calculate the strip crown of four-high hot rolling mill was developedby using affecting function method according to the strip crown calculation theory. The effect ...In order to establish precision model, a software to calculate the strip crown of four-high hot rolling mill was developedby using affecting function method according to the strip crown calculation theory. The effect of work roll diameter,unit width rolling load, roll bending force, work roll crown, initial strip crown and reduction, etc, on load distributioneffect rate was simulated by using the software. The results show that the load distribution effect rate increaseswith the increase of strip width, work roll diameter, unit width rolling load, roll bending force, work roll crown,initial strip crown and reduction. Based on the simulation results, base value of load distribution effect rate andfitting coefficients of six power polynomial of load distribution effect rate modification coefficient were determinedconsidering all of the above parameters. A simplified mathematical model for calculating load distribution effect ratewas established.展开更多
基金This project is financially supported by State Key Fundamental Research of "973" Development Plan (No. G2000067208-4)
文摘A self-made single-roll stirring (SRS) machine was used to manufacturesemisolid A2017 alloy, the mechanism of A2017 alloy formation was investigated. It was shown thatA2017 dendrites growing on the rough roll surface are crashed into fragments by the roll, which moveand grow freely then contribute the formation of finer spherical microstruc-ture. When casting at710-750℃, fine and homogeneous spherical or elliptical grains of A2017 alloy were obtained.Extending forming mould has been designed and was installed at the exit of roll-shoe gap. A2017alloy was formed by extending continuously at the semisolid state on SRS machine. Throughcontrolling pouring temperature, semisolid forming and extending extrusion was combined organically.A2017 product with fine surface and rectangular transection of 14 mm x 25 mm was obtained. Bycontrast to the national standard, the fracture strength and elongation of A2017 products producedfrom extending semisolid extrusion have been improved with an increase of 100 MPa and 29%,respectively.
基金This study was financially supported by the National Natural Science Foundation of China under the contract No.59995440the State Key Development Programming on Foundamental Research under the contract No.G2000067208-4the Natural Science Foundation of Liaoning Province under the contract No.2001101021.
文摘In order to establish precision model, a software to calculate the strip crown of four-high hot rolling mill was developedby using affecting function method according to the strip crown calculation theory. The effect of work roll diameter,unit width rolling load, roll bending force, work roll crown, initial strip crown and reduction, etc, on load distributioneffect rate was simulated by using the software. The results show that the load distribution effect rate increaseswith the increase of strip width, work roll diameter, unit width rolling load, roll bending force, work roll crown,initial strip crown and reduction. Based on the simulation results, base value of load distribution effect rate andfitting coefficients of six power polynomial of load distribution effect rate modification coefficient were determinedconsidering all of the above parameters. A simplified mathematical model for calculating load distribution effect ratewas established.
