期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
Static Bending Creep Properties of Glass Fiber Surface Composite Wood
1
作者 Shang Zhang Jie Wang +4 位作者 Benjamin Rose Yushan Yang Qingfeng Ding Bengang Zhang Chunlei Dong 《Journal of Renewable Materials》 SCIE EI 2023年第6期2881-2891,共11页
To study the static bending creep properties of glass fiber reinforced wood,glass fiber reinforced poplar(GFRP)specimens were obtained by pasting glass fiber on the upper and lower surfaces of Poplar(Populus euramevic... To study the static bending creep properties of glass fiber reinforced wood,glass fiber reinforced poplar(GFRP)specimens were obtained by pasting glass fiber on the upper and lower surfaces of Poplar(Populus euramevicana,P),the performance of Normal Creep(NC)and Mechanical Sorptive Creep(MSC)of GFRP and their influencing factors were tested and analyzed.The test results and analysis show that:(1)The MOE and MOR of Poplar were increased by 17.06%and 10.00%respectively by the glass fiber surface reinforced composite.(2)The surface reinforced P with glass fiber cloth only exhibits the NC pattern of wood and loses the MSC characteristics of wood,regardless of the constant or alternating changes in relative humidity.(3)The instantaneous elastic deformation,viscoelastic deformation,viscous deformation and total creep deflection of GFRP are positively correlated with the stress level of the external load applied to the specimen.Still,the specimen’s creep recovery rate is negatively correlated with the stress level of the external load applied to the specimen.The static creep deflection and viscous deformation of GFRP increase with the increase of the relative humidity of the environment.(4)The MSC maximum creep deflection of GFRP increased by only 7.41%over the NC maximum creep deflection,but the MSC maximum creep deflection of P increased by 199.25%over the NC maximum creep deflection.(5)The Burgers 4-factor model and the Weibull distribution equation can fit the NC and NC recovery processes of GFRP well. 展开更多
关键词 Glass fiber reinforced composite wood Normal Creep(NC) wood creep Mechanical Sorptive Creep(MSC) creep model
下载PDF
两种落叶松规格材齿板节点拉伸性能研究 被引量:1
2
作者 王丽 王滋 +2 位作者 丁青锋 武国芳 赵荣军 《林产工业》 北大核心 2017年第11期9-12,共4页
为探究国产规格材在齿板连接性能方面存在的优劣势,完善国产结构材体系。笔者对两种国产规格材齿板连接节点的板齿极限承载力、临界刚度、破坏形式进行了研究。结果表明:不同种类木材顺纹抗拉强度差异性显著,两种国产落叶松齿板节点板... 为探究国产规格材在齿板连接性能方面存在的优劣势,完善国产结构材体系。笔者对两种国产规格材齿板连接节点的板齿极限承载力、临界刚度、破坏形式进行了研究。结果表明:不同种类木材顺纹抗拉强度差异性显著,两种国产落叶松齿板节点板齿极限承载力、临界滑移刚度、峰值区域面积均高于北美云杉。 展开更多
关键词 国产落叶松 规格材 齿刻痕齿板 齿板节点 破坏形式
下载PDF
木结构墙体传热系数比较研究 被引量:4
3
作者 徐伟涛 何恩霞 +2 位作者 郭宇 丁青峰 姚利宏 《林产工业》 北大核心 2018年第11期47-50,共4页
现代木结构建筑是一种节能、环保的建筑,如何对其进行定量分析和评价是研究的重点和难点。笔者首先利用热流计导热仪检测木结构墙体组成材料的导热系数,计算模拟几种不同组合墙体的传热系数,然后采用热箱-热流计法对实体木结构墙体、木... 现代木结构建筑是一种节能、环保的建筑,如何对其进行定量分析和评价是研究的重点和难点。笔者首先利用热流计导热仪检测木结构墙体组成材料的导热系数,计算模拟几种不同组合墙体的传热系数,然后采用热箱-热流计法对实体木结构墙体、木结构墙体传热系数进行实测对比研究。研究结果表明:38 mm×89 mm木墙骨的平均传热系数为0.436 W/(m^2·K),38 mm×140 mm木墙骨的平均传热系数为0.355 W/(m^2·K),随着木墙骨规格及保温棉厚度的增加,墙体传热系数逐渐减小。 展开更多
关键词 现代木结构 保温性 节能性 木框架 单元组成材料
下载PDF
Effects of salinity on the nail-holding power of dimension lumber used in light-frame wood building 被引量:1
4
作者 Zeli Que LingYang +3 位作者 FeibinWang Xuna Zhu Yongbing Wang Takuro Mori 《Journal of Forestry Research》 SCIE CAS CSCD 2015年第3期765-770,共6页
We studied the effect of salinity on nail-hold- ing power in wood construction. In saline solution, the holding power of nails was less than in purified water. With the increase of salt concentration, the surface and ... We studied the effect of salinity on nail-hold- ing power in wood construction. In saline solution, the holding power of nails was less than in purified water. With the increase of salt concentration, the surface and side nail- holding power of the wood specimens both declined, but the differences between salinity treatments were not sig- nificant. However, compared to the surface and side nail- holding power, the power on the edge was generally less and the difference was not obvious in different salt con- centrations. In the same salt concentration, with the extension of the processing cycle, the performance of holding power of nails showed a downward trend, expect the temporary rise in the middle. 展开更多
关键词 Nail-holding power SALINITY Mechanicalproperties Dimension lumber JOINTS
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部