Design of Clustering Techniques in Cognitive Radio Sensor Networks

In recent decades,several optimization algorithms have been developed for selecting the most energy efficient clusters in order to save power during trans-mission to a shorter distance while restricting the Primary Users(PUs)interfer-ence.The Cognitive Radio(CR)system is based on the Adaptive Swarm Distributed Intelligent based Clustering algorithm(ASDIC)that shows better spectrum sensing among group of multiusers in terms of sensing error,power sav-ing,and convergence time.In this research paper,the proposed ASDIC algorithm develops better energy efficient distributed cluster based sensing with the optimal number of clusters on their connectivity.In this research,multiple random Sec-ondary Users(SUs),and PUs are considered for implementation.Hence,the pro-posed ASDIC algorithm improved the convergence speed by combining the multi-users clustered communication compared to the existing optimization algo-rithms.Experimental results showed that the proposed ASDIC algorithm reduced the node power of 9.646%compared to the existing algorithms.Similarly,ASDIC algorithm reduced 24.23%of SUs average node power compared to the existing algorithms.Probability of detection is higher by reducing the Signal-to-Noise Ratio(SNR)to 2 dB values.The proposed ASDIC delivers low false alarm rate compared to other existing optimization algorithms in the primary detection.Simulation results showed that the proposed ASDIC algorithm effectively solves the multimodal optimization problems and maximizes the performance of net-work capacity.

Analysis, Modeling and Simulation of State Feedback Control for Positive Output Super Lift Luo Converter

This article studies a design and implementation of state-feedback control problem for dc-dc Positive Output Super Lift Luo (POSLL) converter by considering the line and load disturbances for needing desired power source for various portable electronic equipments like battery charger, hard disk drives, medical device, LED TV etc. The POSLL’s dynamic performance becomes non-linear in nature;the designed controller able to get superior dynamic performance given by load estimation is done by using an observer and by combining the state-feedback control with the load estimator, a controller which is explicitly developed with strong robustness using separation principle. An effectual stability analysis is exemplified to prove that by carefully selecting the state feedback control and observer gain matrix, the output voltage of the dc-dc POSLL converter tracks the desired value irrespective of the uncertainties. Extensive simulation is carried out using MATLAB/Simulink model. The result based on time domain analysis is done by using the controllers for various disturbances given to the converter.

Low Area PRESENT Cryptography in FPGA Using TRNG-PRNG Key Generation

Lightweight Cryptography(LWC)is widely used to provide integrity,secrecy and authentication for the sensitive applications.However,the LWC is vulnerable to various constraints such as high-power consumption,time consumption,and hardware utilization and susceptible to the malicious attackers.In order to overcome this,a lightweight block cipher namely PRESENT architecture is proposed to provide the security against malicious attacks.The True Random Number Generator-Pseudo Random Number Generator(TRNG-PRNG)based key generation is proposed to generate the unpredictable keys,being highly difficult to predict by the hackers.Moreover,the hardware utilization of PRESENT architecture is optimized using the Dual port Read Only Memory(DROM).The proposed PRESENT-TRNGPRNG architecture supports the 64-bit input with 80-bit of key value.The performance of the PRESENT-TRNG-PRNG architecture is evaluated by means of number of slice registers,flip flops,number of slices Look Up Table(LUT),number of logical elements,slices,bonded input/output block(IOB),frequency,power and delay.The input retrieval performances analyzed in this PRESENT-TRNG-PRNG architecture are Peak Signal to Noise Ratio(PSNR),Structural Similarity Index(SSIM)and Mean-Square Error(MSE).The PRESENT-TRNG-PRNG architecture is compared with three different existing PRESENT architectures such as PRESENT On-TheFly(PERSENT-OTF),PRESENT Self-Test Structure(PRESENT-STS)and PRESENT-Round Keys(PRESENT-RK).The operating frequency of the PRESENT-TRNG-PRNG is 612.208 MHz for Virtex 5,which is high as compared to the PRESENT-RK.

An Automated Deep Learning Based Muscular Dystrophy Detection and Classification Model

Muscular Dystrophy (MD) is a group of inherited muscular diseases that are commonly diagnosed with the help of techniques such asmuscle biopsy, clinical presentation, and Muscle Magnetic Resonance Imaging(MRI). Among these techniques, Muscle MRI recommends the diagnosis ofmuscular dystrophy through identification of the patterns that exist in musclefatty replacement. But the patterns overlap among various diseases whereasthere is a lack of knowledge prevalent with regards to disease-specific patterns.Therefore, artificial intelligence techniques can be used in the diagnosis ofmuscular dystrophies, which enables us to analyze, learn, and predict forthe future. In this scenario, the current research article presents an automated muscular dystrophy detection and classification model using SynergicDeep Learning (SDL) method with extreme Gradient Boosting (XGBoost),called SDL-XGBoost. SDL-XGBoost model has been proposed to act as anautomated deep learning (DL) model that examines the muscle MRI dataand diagnose muscular dystrophies. SDL-XGBoost model employs Kapur’sentropy based Region of Interest (RoI) for detection purposes. Besides, SDLbased feature extraction process is applied to derive a useful set of featurevectors. Finally, XGBoost model is employed as a classification approach todetermine proper class labels for muscle MRI data. The researcher conductedextensive set of simulations to showcase the superior performance of SDLXGBoost model. The obtained experimental values highlighted the supremacyof SDL-XGBoost model over other methods in terms of high accuracy being96.18% and 94.25% classification performance upon DMD and BMD respectively. Therefore, SDL-XGBoost model can help physicians in the diagnosis of muscular dystrophies by identifying the patterns of muscle fatty replacementin muscle MRI.

Compact Metamaterial Antenna with High Directivity for Bio-Medical Systems

In this paper, high directive antenna using metamaterial property is presented for wireless medical systems. The antenna is constructed by semi-circular patch and hexagonal closed ring resonator (HCRR). For medical applications such as wireless patient movement monitoring, telemetry and telemedicine, communication devices working at ISM band frequency is needed. Here, the requirement is completed with improved directivity such as 16 dBi. And also impedance matching also achieved with low reflection loss -20 dB. This antenna works for multiple frequency bands (Industrial, Scientific and Medical-ISM 2.45 GHz, WLAN 5.3 GHz and GSM 1.9 GHz) with improved directivity.

A framework for building energy management system with residence mounted photovoltaic

Efficient utilization of a residential photovoltaic (PV) array with grid connection is difficult due to power fluctuation and geographical dispersion. Reliable energy management and control system are required for overcoming these obstacles. This study provides a new residential energy management system (REMS) based on the convolution neural network (CNN) including PV array environment. The CNN is used in the estimation of the nonlinear relationship between the residence PV array power and meteorological datasets. REMS has three main stages for the energy management such as forecasting, scheduling, and real functioning. A short term forecasting strategy has been performed in the forecasting stage based on the PV power and the residential load. A coordinated scheduling has been utilized for minimizing the functioning cost. A real-time predictive strategy has been used in the actual functioning stage to minimize the difference between the actual and scheduled power consumption of the building. The proposed approach has been evaluated based on real-time power and meteorological data sets.

RETRACTED ARTICLE: loT based residential energy management system for demand side response through load transfer with various types of domestic appliances

The Editor-in-Chief has retracted this article.After publication,concerns were raised about the high similarity between this article and a previous publication from different authors(Duman et al.2021).Specifically,similarities were identified in the text in the Literature Review and Methodology sections of this article and those in Duman et al.(2021).Additionally,Tables 2 and 3 appear to be copied from Duman et al.(2021).The authors were unable to provide satisfactory source data used in their analysis upon the Editors request.The Editor-in-Chief therefore no longer has confidence in the authenticity of the presented data and the originality of the work.