Application of NSR-AISC Method in Reserve Estimation and Technical Economic Evaluation of Low-Grade Polymetallic Deposits: Taking a Low-Grade Copper-Molybdenum Mine in Guangdong Province as an Example

The development and utilization of low-grade polymetallic deposits with strategic mineral resources is one of the important measures to alleviate the current high dependence on strategic mineral resources in China. However, domestic mining enterprises and most mining consulting and design institutes usually use general industrial indicators to carry out reserve estimation and technical and economic feasibility studies on low-grade polymetallic deposits, which cannot truly reflect the economic value of such deposits. The article expounds on the definitions of net return value (NSR) and on-site total maintenance cost (AISC) of common ore smelters in the evaluation of overseas mineral resources. Taking a low-grade polymetallic copper-molybdenum mine in Guangdong Province as an example, comparing the research results showed the NSR-AISC method and the general industrial index method in low-grade polymetallic deposit. There are huge differences in the results of reserve estimation;through the further introduction of Taylor’s formula and the research results on the relationship between investment intensity and production scale, a more reasonable mine life and investment scale are recommended, and a more in-depth comparative study has been carried out in the dimension of technical and economic indicators. Based on the comparative study of the above two methods in reserve estimation and the evaluation results of technical and economic indicators, the author believes that the NSR-AISC method can better reflect the true value of low-grade polymetallic ore projects, and should be popularized and applied in resource evaluation and development practice. This article further describes the application status of the NSR-AISC method for reserve estimation and the evaluation of technical economic indicators, and suggests the main points that should be paid attention to in the use of the NSR-AISC method.

The Significance of Flotation Frothers Chemical Structure and Fundamental Properties: A Review

Froth flotation is a separation process widely used in the mineral processing industry that depends on differences in particle surface properties to separate valuable materials from undesired gangue. In froth flotation, an addition of a surfactant, acting as frother is usually needed. The basic function of the frother is to produce a swarm of air bubbles, which remain sufficiently stable for the hydrophobic mineral particles to be captured by them. This Paper presents a combination method of a foaming agent-surfactant composition with desirable selectivity and foaming properties. Wherein 1-butanol (C4H10O) is a main flotation foaming agent, which decides bubble sizes in a collecting area;and tetraethylene glycol (C8H18O5) is an auxiliary foaming agent, which affects a rising velocity of the bubbles in the collecting area and a foaming capability in a selected area. Set concentrations of the two components are respectively 60 ppm for the 1-butanol and 120 ppm for the tetraethylene glycol. An addition sequence is the 1-butanol followed by the tetraethylene glycol. The dual advantages of the selectivity and foaming properties of the foaming agent-surfactant composition in the present disclosure are verified through a series of tests, and desirable yields can be obtained in practice.

Development of vacuum die-casting process

The vacuum die-casting process,started 25 years ago in Japan,has been widely applied.This technology contributes very much to improvement of castings quality.The main factor causing the defects of die castings is the trapped air in the mold cavity,while the key technology of vacuum die-casting process is to avoid the trapped air effectively by evacuating the cavity before casting.At the same time,due to the shot speed and the casting pressure reduced in half,the service life of the die is prolonged and the productivity is enhanced,as well.Vacuum die-casting process is of great signif icance in improving the die castings quality and making up the shortcomings of super-high-speed shot casting.

Structural Design of High-precision Positioning System in Weak Signal Environment Based on UWB and IMU Fusion

Aiming at the problem that indoor positioning technology based on wireless ultra-wideband pulse technology is susceptible to non-line-of-sight effects and multipath effects in confined spaces and weak signal environments,a high-precision positioning system based on UWB and IMU in a confined environment is designed.The STM32 chip is used as the main control,and the data information of IMU and UWB is fused by the fusion filtering algorithm.Finally,the real-time information of the positioning is transmitted to the host computer and the cloud.The experimental results show that the positioning accuracy and positioning stability of the system have been improved in the non-line-of-sight case of closed environment.The system has high positioning accuracy in a closed environment,and the components used are consumer-grade,which has strong practicability.

Simulation of the Interaction between Driver and Seat

Test is one of methods to acquire human-seat pressure distribution in driving, with the deficiency of being uneasy to obtain the stress information of soft tissue inside human body and the sheer force of interface between human and seat, which can be obtained by simulation. But current simulation method focuses mainly on calculation itself other than combining it with posture prediction and cab packaging parameters, which cause it difficult to acquire accurate pressure calculation results without accurate posture of human body, and make it almost meaningless to design optimization. Therefore, a human body geometric model with posture change capability is built and linked up with Cascade Prediction Model（CPM）, which takes cab packaging parameters as inputs. A detailed finite element model of driver human body is constructed and used to conduct the driver-seat interaction simulation between human body and seat. Good accordance of pressure distribution is observed between simulation and test, which validates the simulation. In addition to the distribution pattern, curves on key sections are used to analyze the pressure and shear stress on the seat surface, as well as soft tissue stress inside human body. The simulation shows that the maximum stress of buttocks locates under the ischial tuberosity, and the maximum stress of trunk occurs near the scapula posterior and the lower waist. These are the places where fatigue usually occurs. The maximum pressure of seat appears at the driver-seat contact area corresponding to the driver＇s maximum skin tissue stress. In order to guide the seat design and cab packaging and study the influence of posture to pressure distribution, finite element models for different levels of cab packaging parameters are created by using CPM. The pressure distributions are calculated and their tendencies varying with cab packaging parameters are obtained. The method presented provides a new way to accurately simulate the interaction between driver human body and seat, and to guide the seat design and cab packaging so as to improve seating comfort.

Experimental investigation on vibration characteristics of the medium-low-speed maglev vehicle-turnout coupled system

The steel turnout is one of the key components in the medium–low-speed maglev line system.However,the vehicle under active control is prone to vehicle–turnout coupled vibration,and thus,it is necessary to identify the vibration characteristics of this coupled system through field tests.To this end,dynamic performance tests were conducted on a vehicle–turnout coupled system in a medium–low-speed maglev test line.Firstly,the dynamic response data of the coupled system under various operating conditions were obtained.Then,the natural vibration characteristics of the turnout were analysed using the free attenuation method and the finite element method,indicating a good agreement between the simulation results and the measured results;the acceleration response characteristics of the coupled system were analysed in detail,and the ride quality of the vehicle was assessed by Sperling index.Finally,the frequency distribution characteristics of the coupled system were discussed.All these test results could provide references for model validation and optimized design of medium–low-speed maglev transport systems.

Determination of phthalate esters in physiological saline solution by monolithic silica spin column extraction method

Monolithic silica spin column extraction （MonoSpin-SPE） was developed as a simple, sensitive, and eco-friendly pretreatment method which combined with ultra-fast liquid chromatography-mass spectrometry （UFLC-MS） to determine the levels of six phthalate esters, dimethyl- （DMP）, diethyl- （DEP）, dipropyl- [ DPrP], butyl-benzyl- （BBP）, dicyclohexyl- （DcHP）, and di-n-octyl-（DOP） phthalate in physiological saline samples. Under optimized experimental conditions, the method was linear in the following ranges： 0.2- 50 μg/L for DMP, DEP, DPrP, DcHP and DOP; 5- 100 μg/L for BBP. The correlation coefficients （R2 ） were in the range of 0. 9951 - 0. 9995 for all the analytes and the limits of detection （LODs） and limits of quantification （LOQs） were in the ranges of 0.02 - 0.9 μg/L and 0.08 - 2.7μg/L, respectively. The pretreatment process showed good reproducibility with inter-day and intra-day relative standard deviations （RSDs） below 8.5% and 11.2%, respectively. This method was used to determine the levels of six phthalate esters in physiological saline samples and the recoveries ranged from 71.2% to 107.3%. DMP and DEP were found in actual physical saline samples （brand A and brand B）.

Multi-parameter quantitative assessment of 3D geological models for complex fault-block oil reservoirs

In the field of 3 D geologic modeling, researchers often pay more attention to modeling methods and workflows, but neglect the quantitative evaluation of models. If the evaluation is narrowed to the same reservoir type, the comparability and practicality of quantitative assessment will be emerging. The evaluation system should include three parts: data verification, geological understanding and process check. Data verification mainly involves testing the accuracy of local prediction with actual data, and geological understanding is to examine whether the global estimation honors geological principles and prior insights. Process check is also indispensable to avoid occasionality. To this end, we produced a set of assessment criteria, taking complex fault-block sandstone oil reservoir as an example. To be specific, thirteen characteristic parameters were totally selected, setting weights according to their rated importance, formulating three-level evaluation standards in a centesimal system for each characteristic parameter, and obtaining the final assessment based on the cumulative score. The results indicate that such evaluation can not only access the quality of the model objectively and comprehensively, but also identify the aspects in need of improvement through the deduction items.

压下量对单层钢丝帘线校直辊工艺的影响

钢丝帘线一般用作提升轮胎性能的增强材料。平直度和残余扭转是评估单层钢丝帘线质量的重要项目。钢丝帘线通常是由拉拔单丝采用不同的捻制方法制成,捻制过程中钢丝帘线通过捻制和校直装置达到各种捻合和弯曲条件。捻制过程通常会引起钢丝帘线内部残余应力的不均衡,这是造成钢丝帘线质量下降的主要原因。为了缓解残余应力的不均衡,在钢丝帘线捻制过程中通常使用过捻和校直辊装置。

Optimal placement of dampers and actuators based on stochastic approach

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures.The study includes development of a statistical criterion,formulation of a general optimization problem and establishment of a solution procedure.Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location.This study shows that the proposed method for the optimal device application is simple and general,and that the optimally applied dampers and actuators are very efficient for seismic response reduction.

NONLINEAR THEORY OF DYNAMIC STABILITY FOR LAMINATED COMPOSITE CYLINDRICAL SHELLS

Hamilton principle war used to derive the general governing equations of nonlinear dynamic stability far laminated cylindrical shell in which, factors of nonlinear large deflection, transverse shear and longitudinal inertia force were concluded. Equations were salved by variational method. Analysis reveals that under the action of dynamic load, laminated cylindrical shells will fall into a store of parametric resonance and enter into the dynamic unstable region that causes dynamic instability of shells. Laminated shells of three typical composites were computed : i.e. T300/5 208 graphite epoxy E-glass epoxy, and ARALL shells. Results show that all factors will induce important influence for dynamic stability of laminated shell. So, in research of dynamic stability for laminated shells, to consider these factors is important.

Environmental Impact Assessment and Eco-civilization Construction of Urbanization in China

As major policy put forward by the new leadership of China, urbanization will play an irreplaceable role in improving people＇s living standards and guaranteeing sustainable growth of economy. But in the process of urbanization, there are many problems, such as environmental damage and ecological imbalance. Therefore, organic combination of eco-civilization construction and urbanization will be the key solving the problem. As one of preconditions of planning and project, environmental impact assessment will also play pivotal role in eco-civilization construction of urbani- zation in China. We detailedly introduce environmental impact assessment, and put forward how to effectively use environmental impact assessment for the eco-civilization construction of urbanization in China.

Neurological rehabilitation of stroke patients via motor imaginary-based brain-computer interface technology

The present study utilized motor imaginary-based brain-computer interface technology combined with rehabilitation training in 20 stroke patients. Results from the Berg Balance Scale and the Holden Walking Classification were significantly greater at 4 weeks after treatment （P 〈 0.01）, which suggested that motor imaginary-based brain-computer interface technology improved balance and walking in stroke patients.

A Bioprocessed Black Rice Bran Glutathione-Enriched Yeast Extract Protects Rats and Mice against Alcohol-Induced Hangovers

Human and animal alcohol-induced hangovers are caused by adverse effects of acetaldehyde formed in vivo by the enzymatic oxidation of ethyl alcohol to acetaldehyde. This study aims to determine the effect of the combination of a bioprocessed black rice bran (BRB-F) and glutathione-enriched yeast extract (GEYE) on hangovers as tested in rats and mice. Because analysis by HPLC showed that the content of the biologically active rice bran compound γ-oryzanol as well as of the antioxidant reduced glutathione were unaffected during the preparation of tablets containing 100 mg/kg of the bran formulation, the tablets were then administered orally to rats. The results showed decreased blood concentrations of both alcohol and acetaldehyde compared to the control group. Additional behavior experiments using the Rota-rod and wire tests in mice confirmed that the food formulation relieved hangover behavior caused by alcohol. It seems that the combination of BRB-F and GEYE can effectively control hangovers in rodents caused by alcohol intake. Mechanistic aspects of the hangover and anti-hangover effects of alcohol-derived acetaldehyde are similar to browning-type reactions between the aldehyde group of glucose and proteins, the antibiotic effects of cinnamaldehyde against pathogenic bacteria, the adverse effects of the heat-induced food toxin acrylamide, and the alkali-induced formation of the unnatural amino acid lysinoalanine.

Preventive Effect of Lactococcus lactis subsp. lactis JCM 5805 Yogurt Intake on Influenza Infection among Schoolchildren

Objective: A community-based intervention study was conducted to examine the effect of consumption of JCM 5805 yogurt on influenza incidence rates and the cumulative incidence rates among schoolchildren in Iwate Prefecture, Japan. Methods: Schoolchildren and their parents in Shizukuishi town were told of the purpose, frequency and duration of JCM 5805 yogurt administration. The number of elementary schoolchildren in Shizukuishi town was 780 while that of junior high school students in Shizukuishi town numbered 475. The number of elementary schoolchildren in neighboring town A was 208 and that of junior high school students in town A was 121. JCM 5805 yogurt was delivered three times a week to all elementary schools and junior high schools in Shizukuishi town from January 16 through March 18, 2015. The incidence rate was calculated every week as the maximum case number divided by the number of schoolchildren in each school. The cumulative incidence rate was calculated as the total case number during the period when JCM 5805 yogurt was delivered divided by the number of schoolchildren in each school. Results: JCM 5805 yogurt intake was associated with a two-thirds reduction in influenza incidence rates in Shizukuishi town schoolchildren compared with those of town A. Furthermore, the cumulative incidence rates of the elementary school and combined data from the elementary school and junior high school were significantly lower than those of neighbor town A. Conclusion: JCM 5805 yogurt intake reduced both the incidence rates and cumulative incidence rates of influenza.

Analysis and Study on the Change of the Observed Geo-electric Field Data at Lhasa Geomagnetic Station before and after the Nepal MS8.1 Earthquake

In this paper,the main purpose is to analyze and research the characteristics of the geoelectric field observed data with a long time span and large amplitude abnormal change,at the Lhasa geomagnetic station( hereafter referred to as "Lhasa station "),before and after the Nepal M_S8. 1 strong earthquake,which occurred on April 25,2015. Based on the observation conditions,the observation system,and the observed data of Lhasa station preliminary discussed,the main characteristics of the abnormal change and evolution process are analyzed and studied,using the following two methods; the "synthesis energy accumulation"and the "power as MSA spectrum"analysis,from the two aspects of the"Time Domain"and"Frequency Domain. "The results show that the abnormal change of the geo-electric field observation of Lhasa station experienced a development stage following the process of "trend change- disturbance change- earthquake period-recovery period",and an evolution process of "low frequency change- high frequency change- smooth change- high frequency change ",before and after the Nepal M_S8. 1strong earthquake. Comprehensive analysis shows that the variation characteristics and evolution process of the geo-electric field at Lhasa station are basically consistent with the results of the relevant mechanism and phenomenon research. So far,this is valuable information with certain objectivity,which is typical and representative to reflect the whole process of the gestation, occurrence and complete development of such strongearthquakes.

Mechanical Analysis of Viscous-Elastic Fluid Acting on Residual Oil in the Micro Pore

In order to analyze the normal deviatoric stress that viscous-elastic fluid acting on the residual oil under the situation of different flooding conditions and different permeabilities, Viscous-elastic fluid flow equation is established in the micro pore by choosing the continuity equation, motion equation and the upper-convected Maxwell constitutive equation, the flow field is computed by using numerical analysis, the forces that driving fluid acting on the residual oil in micro pore are got, and the influence of flooding conditions, pore width and viscous-elasticity of driving fluid on force is compared and analyzed. The results show that: the more viscous-elasticity of driving fluid increases, the greater the normal deviatoric stress acting on the residual oil increases;using constant pressure gradient flooding, the lager the pore width is, the greater normal deviatoric stress acting on the residual oil will be.

Effect of Indoor and Underground Storage on Efficient Vegetative Propagation of Dwarf Napier Grass (Pennisetum purpureum Schumach)

Dwarf, late-heading (DL) Napier grass is suitable for both cut-and-carry and grazing management due to sufficient yield and quality potential. This species can hardly produce viable seed, and thus vegetative propagation should be essential before winter in temperate regions of southern Kyushu. The objective of this study was to determine the efficient storage methods of DL vegetative propagation. Two experiments were carried out, the first focused on indoor storage of 10-node stem sections under room or chilling (10°C) conditions and the second, on underground storage of ten-node and one-node stem sections at 10 cm, 25 cm or 40 cm depth. After both storages, both of ten-node stem sections, cut into single nodes, and one-node stem sections were transplanted into the soil and counted for the emergence every month in 3 months of planting. In indoor-storage, while storage temperature hardly affected the emergence (P > 0.05), storage period significantly reduced the emergence percentage. In underground storage, while one-node storage achieved constantly 60% emergence, ten-node storage achieved a higher emergence at 80% under 25-cm and 40-cm depths. The results of the study suggest that underground storage of longer stem sections at 25 cm depth could be applied to practical vegetative propagation in the region.

EXAMINATION OF POLYCHLORINATED DIBENZO-P-DIOXINS AND POLYCHLORINATED DIBENZOFURANS INTO PROCESS WATER OF KRAFT PULP BLEACHING MILL FROM ASPECT OF ENVIRONMENTAL WATER QUALITY

Process water of a pulp mill with kraft cooking, oxygen delignification and chlorine bleaching or chlorine dioxide (ECF) bleaching was examined from an aspect of a new level for environmental water quality in Japan. According to the new level, a concentration of dioxins consisting of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and coplanar polychlorinated biphenyls (PCBs) in environmental water is restricted to less than 1 pg- TEQ/L. We clarified that the 2,3,7,8-tetrachlorodibenzofuran (TCDF) concentrations were 0.5 pg/L or less. In addition, a main source of 1,3,6,8- and 1,3,7,9-tetrachlorodibenzo-p-dioxins in the process water seemed to be an agrochemical in water supplied from a river.