A simple method is presented to eliminate gray-tracking effects of KTP crystals using a strong focusing scheme. Experimental and theoretical studies on the gray-tracking effects are carried out. A 18 W green laser is ...A simple method is presented to eliminate gray-tracking effects of KTP crystals using a strong focusing scheme. Experimental and theoretical studies on the gray-tracking effects are carried out. A 18 W green laser is demon-strated with a 9 kHz repetition rate, a beam quality factor of M^2 = 1.6 and a conversion efficiency of 44%.展开更多
We demonstrate a technique for single transverse mode operation of high-power broad area laser diode (BAL). In the experiment, the HR mirror is used as an external cavity mirror and the grating is used as a wavelength...We demonstrate a technique for single transverse mode operation of high-power broad area laser diode (BAL). In the experiment, the HR mirror is used as an external cavity mirror and the grating is used as a wavelength selective component. By tiling the HR mirror and the grating, the number of transverse modes oscillating in the cavity can be limited and the spectral bandwidth of the laser diode can be reduced. A single-lobed near diffraction-limited laser beam with the beam divergence (FWHM) of 0.43°, the spectral line-width of 0.7 nm and the output power of 350 mW are obtained. With the feedback, the power density of the output laser beam is increased 6 times in comparison with the free running.展开更多
基金Supported by the National Natural Science Foundation of China under Grant No 10876037, and China Postdoctoral Science Foundation under Grant No 20080441238.
文摘A simple method is presented to eliminate gray-tracking effects of KTP crystals using a strong focusing scheme. Experimental and theoretical studies on the gray-tracking effects are carried out. A 18 W green laser is demon-strated with a 9 kHz repetition rate, a beam quality factor of M^2 = 1.6 and a conversion efficiency of 44%.
基金This work was supported by the National Natural Science Foundation of China under Grant No. 60278038.
文摘We demonstrate a technique for single transverse mode operation of high-power broad area laser diode (BAL). In the experiment, the HR mirror is used as an external cavity mirror and the grating is used as a wavelength selective component. By tiling the HR mirror and the grating, the number of transverse modes oscillating in the cavity can be limited and the spectral bandwidth of the laser diode can be reduced. A single-lobed near diffraction-limited laser beam with the beam divergence (FWHM) of 0.43°, the spectral line-width of 0.7 nm and the output power of 350 mW are obtained. With the feedback, the power density of the output laser beam is increased 6 times in comparison with the free running.
