Study on the clogging mechanism of punching screen in sand control by the punching structure parameters

As an independent sand control unit or a common protective shell of a high-quality screen,the punching screen is the outermost sand retaining unit of the sand control pipe which is used in geothermal well or oil and gas well.However,most screens only consider the influence of the internal sand retaining medium parameters in the sand control performance design while ignoring the influence of the plugging of the punching screen on the overall sand retaining performance of the screen.To explore the clogging mechanism of the punching screen,this paper established the clogging mechanism calculation model of a single punching screen sand control unit by using the computational fluid mechanics-discrete element method(CFD-DEM)combined method.According to the combined motion of particles and fluids,the influence of the internal flow state on particle motion and accumulation was analyzed.The results showed that(1)the clogging process of the punching sand control unit is divided into three stages:initial clogging,aggravation of clogging and stability of clogging.In the initial stage of blockage,coarse particles form a loose bridge structure,and blockage often occurs preferentially at the streamline gathering place below chamfering inside the sand control unit.In the stage of blockage intensification,the particle mass develops into a relatively complete sand bridge,which develops from both ends of the opening to the center of the opening.In the stable plugging stage,the sand deposits show a“fan shape”and form a“V-shaped”gully inside the punching slot element.(2)Under a certain reservoir particle-size distribution,The slit length and opening height have a large influence on the permeability and blockage rate,while the slit width size has little influence on the permeability and blockage rate.The microscopic clogging mechanism and its law of the punching screen prevention unit are proposed in this study,which has some field guidance significance for the design of punching screen and sand prevention selection.

Nuclear magnetic resonance experiments on the time-varying law of oil viscosity and wettability in high-multiple waterflooding sandstone cores

A simulated oil viscosity prediction model is established according to the relationship between simulated oil viscosity and geometric mean value of T2spectrum,and the time-varying law of simulated oil viscosity in porous media is quantitatively characterized by nuclear magnetic resonance(NMR)experiments of high multiple waterflooding.A new NMR wettability index formula is derived based on NMR relaxation theory to quantitatively characterize the time-varying law of rock wettability during waterflooding combined with high-multiple waterflooding experiment in sandstone cores.The remaining oil viscosity in the core is positively correlated with the displacing water multiple.The remaining oil viscosity increases rapidly when the displacing water multiple is low,and increases slowly when the displacing water multiple is high.The variation of remaining oil viscosity is related to the reservoir heterogeneity.The stronger the reservoir homogeneity,the higher the content of heavy components in the remaining oil and the higher the viscosity.The reservoir wettability changes after water injection:the oil-wet reservoir changes into water-wet reservoir,while the water-wet reservoir becomes more hydrophilic;the degree of change enhances with the increase of displacing water multiple.There is a high correlation between the time-varying oil viscosity and the time-varying wettability,and the change of oil viscosity cannot be ignored.The NMR wettability index calculated by considering the change of oil viscosity is more consistent with the tested Amott(spontaneous imbibition)wettability index,which agrees more with the time-varying law of reservoir wettability.

Characteristics of Rock Mechanics Response and Energy Evolution Regime of Deep Reservoirs in the Bozhong Sag,Bohai Bay Basin

Hydraulic fracturing is a mature and effectivemethod for deep oil and gas production,which provides a foundation for deep oil and gas production.One of the key aspects of implementing hydraulic fracturing technology lies in understanding mechanics response characteristics of rocks in deep reservoirs under complex stress conditions.In this work,based on outcrop core samples,high-stress triaxial compression tests were designed to simulate the rock mechanics behavior of deep reservoirs in Bozhong Sag.Additionally,this study analyzes the deformation and damage law for rock under different stress conditions.Wherein,with a particular focus on combining energy dissipation theory to further understand damage law for deep reservoirs.The experimental results show that regardless of stress conditions,the process of deformation/failure of deep-seated reservoirs goes through five stages:Fracture compaction,newfracture formation,stable fracture expansion,unstable fracture expansion,and post-peak residual deformation.Under different stress conditions,the energy change laws of specimens are similar.The energy dissipation process of rocks corresponds closely to the trend of deformation-failure curve,then displays distinctive stage characteristics.Wherein,in stage of rock fracture compaction,the input energy curve is approximately coincident with the elastic strain energy curve,while the dissipation energy curve remains near zero.With the increase of strain,the growth rate of elastic strain energy increases gradually,but with the deformation entering the crack propagation stage,the growth rate of elastic strain energy slows down and the dissipation energy increases gradually.Finally,in the post-peak stage,rock fracture releases a lot of energy,which leads to the sharp decline of elastic strain energy curve.In addition,the introduction of damage variable D quantifies the analysis of the extent of failure for rocks.During the process of increasing strain,rock damage exhibits nonlinear growth with increasing stress.

Analysis Method and Application of Multiple Antiquities Sources in the Shahejie Formation of the Paleogene in the Southern Bohai Sea

B Oilfield is the most representative mid to deep oil field in the Bohai Sea, with the main oil bearing intervals being the upper and middle Shahejie-3 sections of the Paleogene Shahejie Formation. Through the development of ancient landforms, characterization of material source channels, analysis of missing heavy mineral sources, and seismic reflection characteristics of multiple material source missing, the material sources of the middle and upper Shahejie-3 sections are analyzed. During the sedimentation period of the II oil formation in the middle section of the Shasan Formation, the study area was mainly dominated by the Kendong Uplift source rocks;During the sedimentation period of the I oil formation in the middle section of the Shasan Formation, there were three material sources in the study area, namely the Kendong Uplift, the Laibei Low Uplift, and the Weibei Uplift. The Kendong Uplift was the main material source, followed by the Laibei Low Uplift;During the sedimentation period of the Upper Shasan Formation, the study area still had three sources of material supply simultaneously. At this time, the Laibei Low Uplift was the main source area, while the Kendong Uplift and Weibei Uplift had a relatively small supply capacity for the study area. In the analysis of archaeological sources, the distribution characteristics of the sedimentary system in the third section of the Shahejie Formation have been clarified, providing a research basis for the later development and adjustment of the oilfield.

Study on the Fine Configuration of Reservoir in River Facies Oilfield in Bohai Sea Area

The geological conditions of offshore shallow water delta oil reservoirs were complex, with limited well data and large well spacing. Taking A Oilfield in the Bohai Sea Area, China as an example, the target sand body was formed in a shallow water delta sedimentary environment, with well-developed underwater distributary channels and frequent branching and diversion. The reservoir was strong non-uniformity and uneven plane water cut pressure. To this end, based on the existing work of predecessors, combined with seismic, logging, and production dynamics data, and based on the genesis mechanism of shallow water delta reservoirs, the boundary of composite river channels was identified through seismic facies, and logging facies were used to subdivide them into single river levels within the composite river channels. Then, seismic waveform characteristics were applied to track and characterize the plane distribution of single river channels, guiding the efficient development of offshore shallow water delta oil fields and achieving increased storage and production in Bohai Oilfield, China.

Method and Description of Sedimentary System Characterization Based on Sequence Stratigraphy

A Oilfield is the most representative mid to deep oil field in the Bohai Sea, with the main oil bearing intervals being the upper and middle Shahejie-3 sections of the Paleogene Shahejie Formation. By combining well seismic analysis, the middle section of Shahejie-3 is divided into high-level system tract and forced lake retreat system tract, corresponding to the II oil formation and I oil formation, respectively. Using sequence stratigraphy methods, based on seismic profiles and drilling lithological cycles, the high stand system tract is divided into 5 stages of delta progradation. The first and second stages are high angle S-type progradation with large sedimentary thickness, the third stage is oblique progradation, and the fourth and fifth stages are S-oblique composite progradation;By combining seismic data, we characterized the large-scale (8 small-scale) progradation bodies of 5 periods, clarified the distribution characteristics of reservoir planes, and laid the foundation for the later exploration of oilfield potential.

Effect of petroleum chemical fraction and residual oil content in saline lacustrine organic-rich shale: A case study from the Paleogene Dongpu Depression of North China

Halite and gypsum minerals in saline shale make the retention mechanism and chemical fractionation of residual oil unique. The Dongpu Depression in North China is a typically saline lacustrine basin with developing halite and gypsum. The effect of gypsum minerals on residual oil content and chemical fractionation remains unclear. In this study, shale samples with different gypsum contents were used in organic geochemical experiments, showing that the high total organic matter (TOC) content and type II kerogen leads to a high residual oil content, as shown by high values of volatile hydrocarbon (S1) and extractable organic matter (EOM). XRD and FE-SEM result indicate that the existence of gypsum in saline shale contributes to an enhanced pore space and a higher residual oil content in comparison to non-gypsum shale. Additionally, the increase in the gypsum mineral content leads to an increase in the saturated hydrocarbon percentage and a decrease in polar components percentage (resins and asphaltene). Furthermore, thermal simulation experiments on low-mature saline shale show that the percentage of saturated hydrocarbons in the residual oil is high and remains stable and that the storage space is mainly mesoporous (> 20 nm) in the oil expulsion stage. However, the saturated hydrocarbons percentage decreases rapidly, and oil exists in mesopores (> 20 nm and < 5 nm) in the gas expulsion stage. In general, gypsum is conducive to the development of pore space, the adsorption of hydrocarbons and the occurrence of saturated hydrocarbon, leading to large quantities of residual oil. The data in this paper should prove to be reliable for shale oil exploration in saline lacustrine basins.

Influencing mechanism of saline sediments on pore system formation and evolution in terrestrial shales

The majority of oil and gas resources in the world are related to saline sediments, which mainly occur in sedimentary strata in the form of cap rocks or salt-associated shales. A large number of shale oil resources have been discovered in the saline shale sediments of the Cenozoic terrestrial lake basin in China. The hydrocarbon generation ability and the reservoir capacity of shale control the oil and gas generation. The reservoir capacity is mainly characterized by pore type, structure and porosity. Most of China’s shale oil and gas resources belong to salt-bearing formations. The role of gypsum-salt rocks in the formation and evolution of organic matter (OM) in such formations has received extensive attention. However, systematic understanding is lacking. Research on the pore formation and evolution in shale under the action of gypsum-salt rock sediments is especially weak. Taking the shales in the third member of the Shahejie Formation (Es_(3)) of the Bohai Bay Basin as an example, the influence of halite on the formation and evolution process of pores was studied in this paper. The results show that halite and gypsum minerals were associated with OM, which made them more likely to develop OM pores. The samples with a high halite mineral content (HC) are more developed regarding the pore volume and specific surface area than those with a low HC. The formation of thick salt rocks is influenced by factors of deep thermal brine upwelling, sea erosion and arid environments. The frequent alternation between humid and arid environments led to the outbreak and death of organisms and the precipitation of gypsum-salt rock, which formed the simultaneous deposition of OM and halite minerals. Finally, we have established a model of shale pore evolution under the participation of the gypsum-salt rock, and halite minerals contribute to pore development in both Stage II and Stage IV. This study provides strong microscopic evidence for the pore system formation and evolution in salt-bearing reservoirs.

Proppant transport in rough fractures of unconventional oil and gas reservoirs

A method to generate fractures with rough surfaces was proposed according to the fractal interpolation theory.Considering the particle-particle,particle-wall and particle-fluid interactions,a proppant-fracturing fluid two-phase flow model based on computational fluid dynamics(CFD)-discrete element method(DEM)coupling was established.The simulation results were verified with relevant experimental data.It was proved that the model can match transport and accumulation of proppants in rough fractures well.Several cases of numerical simulations were carried out.Compared with proppant transport in smooth flat fractures,bulge on the rough fracture wall affects transport and settlement of proppants significantly in proppant transportation in rough fractures.The higher the roughness of fracture,the faster the settlement of proppant particles near the fracture inlet,the shorter the horizontal transport distance,and the more likely to accumulate near the fracture inlet to form a sand plugging in a short time.Fracture wall roughness could control the migration path of fracturing fluid to a certain degree and change the path of proppant filling in the fracture.On the one hand,the rough wall bulge raises the proppant transport path and the proppants flow out of the fracture,reducing the proppant sweep area.On the other hand,the sand-carrying fluid is prone to change flow direction near the contact point of bulge,thus expanding the proppant sweep area.

Research on Identification Method of Argillaceous Interlayer in Compound Sand

For the compound sand body, the interlayer is an important factor affecting the adjustment of oil production structure and remaining oil distribution. According to the origin of argillaceous interlayer, the interlayer is divided into three types, including barriers between two single layers, intercalations between two single sands and intercalations in a single sand. In this study, the upper limit of physical properties of interlayer was obtained by analyzing the relationship between physical parameters and production index per-meter. The discriminant index and comprehensive discriminant chart of interlayer were obtained by grey correlation method, which realize the quantitative identification of different types of interlayer. The intercalations between two single sands in the target area are distributed almost in the whole area, which is one of the most important factors influencing the mining effect of compound sand, so the planar distribution is mainly aimed at it. Firstly, through cross-well comparison, we summarize three interlayer patterns, then establish their forward modeling, so as to obtain the vertical seismic characteristics of different patterns. Secondly, according to the thickness of intercalations between two single sands, we take the top of bottom sand as the baseline, extract the average amplitude attribute from the upper and lower 3 ms, then, according to the seismic section and planar characteristics of the well, the interlayer structures represented by different seismic section and planar characteristics are summarized. Finally, starting from the real drilling interlayer of the well, the planar spread of interlay can be obtained according to their variation trend and distribution.

Energy Consumption Analysis and Optimization of Electric Submersible Pump System

Electric submersible pumps account for a considerable proportion in the development of the Bohai Oilfield. Improving the system efficiency of the electric submersible pump wells, ensuring that the units operate in the high-efficiency zone, is essential. Analysis shows that the efficiency of the electric submersible pump system depends on the wear and tear of each component of the submersible pump equipment, the setting of operational parameters, and more importantly, the production status and daily management level of the oil well. Therefore, improving the structural performance of the submersible pump product, optimizing the parameters setting of the oil well, strengthening daily management, establishing a scientific management system, and improving the production management process and system can effectively improve the production efficiency and economic benefits of the oil well, and further achieve the goal of energy saving and emission reduction. In addition, it is necessary to actively promote the concept and technology of energy saving and emission reduction, encourage oilfield enterprises to explore effective measures to reduce the energy consumption of the electric submersible pump system by strengthening the scientific management system, and achieve a green, low-carbon, and high-quality development of oilfield production to achieve the unity of economic benefits, social benefits, and environmental benefits. This article applies the above measures in the P oilfield to achieve energy optimization of submersible electric pump systems, reducing the daily power consumption of single well submersible electric pump systems by 371 kWh per day, increasing the submersible electric pump's lifespan by 200 days, generating considerable project benefits.

Optimization of the Algorithm for Increasing Injection Rate in Water Injection Wells for Pressure Optimization in P Oilfield

In today’s society, with the continuous growth of energy demand, Bohai Oilfield, as an important offshore oil resource base in China, is facing increasingly severe challenges while contributing to national energy security. In order to improve the quality of water injection in the oilfield and gradually achieve efficient and stable production, Bohai Oilfield has launched a water injection well pressure optimization project, focusing on improving the efficiency and quality of water injection in the water injection wells, in order to achieve the optimal water injection plan. In practical work, P Oilfield continues to promote the development of water injection well pressure optimization projects, emphasizing practical exploration and continuous optimization of work plans. However, during the project implementation process, there were some problems, one of which was that the statistics of cumulative injection volume were not scientific enough, resulting in a more comprehensive and accurate presentation of the actual results of pressure optimization work. In the context of continuous improvement work, after careful analysis and research, P Oilfield has decided to optimize the cumulative injection rate algorithm to guide the oilfield’s water injection work in a more refined way, ensuring sufficient and good water injection, and enhancing the oilfield’s production efficiency and comprehensive competitiveness.

Characterization of Complex Fracture System in Volume Fracturing of Shale Gas Reservoir

After volume fracturing of horizontal wells in shale gas reservoir, an extremely complex fracture system is formed. The space area of the fracture system is the reservoir reconstruction volume of shale gas reservoir. The geometric parameters such as crack length, crack width, crack height, and characteristic parameters such as crack permeability and fracture conductivity proposed for a single crack in conventional fracturing are insufficient to describe and characterize the complex network fracture system after volume fracturing. In this paper, the discrete fracture modeling method is used to establish the volume fracturing network fracture model of horizontal wells in shale gas reservoir by using the random modeling method within the determined reservoir space. The model is random and selective, and can fully provide different forms of volume fracturing fracture expansion, such as conventional fracture morphology, line network model and arbitrarily distributed network fractures. The research results provide a theoretical basis for the development plan and stimulation plan of shale gas reservoir, and have important reference value and significance for other unconventional gas reservoir fracturing.

Application of Fluid Phase Recovery Method in the Early Development of BZ26-6 Volatile Oil Field in Bohai Sea

BZ26-6 Oilfield is a kind of deep metamorphic rock buried-hill volatile oilfield in Bohai Sea, China. Its early development plan is restricted due to the simultaneous production of oil and gas in large sections of reservoirs, unclear understanding of formation fluid properties and uncertainty of gas-oil interface. Through theoretical research on phase recovery and experimental analysis of crude oil phase characteristics in the original formation, characteristic parameters of the equilibrium condensate gas fluid are restored and calculated. Through the superimposed phase diagram of volatile oil and condensate gas, BZ26-6 Oilfield is determined to be a volatile oil reservoir with a condensate gas cap, with formation pressure and saturation pressure of 36.1 MPa, respectively. Based on the research results of oil-gas phase behavior characteristics, the thermodynamic equations and equation of state are jointly used to solve the problem, and the content change curves of each component at different depths are drawn. Combined with the sensitivity analysis of numerical simulation, the gas-oil interface is determined to be -3726 m above sea level. The fluid phase analysis software, Fluidmodeler, is used to simulate volatile oil degassing and condensate gas separation experiments. In combination with oil and gas production data obtained through the production test, the specific oil recovery index and the specific gas recovery index are determined to be 0.408 m3/(MPa·d·m) and 1195 m3/(MPa·d·m), respectively. And the reasonable production capacity prediction is conducted on the early development of BZ26-6 Oilfield. The research results can provide a theoretical basis for the efficient development of similar complex oil and gas reservoirs.

Experimental Study on Phase Characteristics of CO2 Injection in BZ13-2 Strong Volatile Oil Reservoir in Bohai Sea Buried Hills

BZ13-2 oil field is a deep submerged strongly volatile reservoir in Bohai Sea. This oil reservoir has the characteristics of high gas oil ratio and small difference in formation pressure and saturation point pressure. It usually adopts gas injection development to avoid crude oil degassing and fast decreasing production capacity. However, the phase characteristics and miscibility mechanism of this high-temperature and high-pressure fluid after gas injection are not clear. Therefore, it is necessary to study the feasibility of CO2 injection to improve oil recovery in near critical volatile oil reservoirs through CO2 injection experiments. In the early stage of the depletion experiment, the content of heavy components in the remaining oil increased significantly, so the depletion method is not conducive to the development of such reservoirs. With the increase of CO2 injection, the volumetric expansion coefficient of formation crude oil increases significantly, while the saturation pressure and formation crude oil viscosity remain basically unchanged. The minimum miscible pressure experiment shows that CO2 injection under formation pressure conditions can achieve multiphase miscibility. Based on experimental research results, the BZ13-2 oilfield is suitable for early gas injection development and can significantly improve recovery.

Study on Remaining Oil at High Water Cut Stage of the Offshore Strong Bottom Water Reservoir

C oilfield is a heavy oil field developed by horizontal wells and single sand body in Bohai oilfield. The edge and bottom water of the reservoir is active and the natural energy development mode is adopted. The comprehensive water cut of the oilfield was 95.3%, which had entered the stage of high water cut oil production. Some reservoirs were limited by crude oil viscosity and oil column height. Under the condition of existing development well pattern, some reserves were not produced or the degree of production was low, and the degree of well control was not high, so there is room for tapping the potential of remaining oil. This paper studied the rising law of water ridge of horizontal wells in bottom water reservoir by reservoir engineering method, and guided the infilling limit of horizontal wells in bottom water reservoir. At the same time, combined with the research results of fine reservoir description, the geological model was established, the numerical simulation was carried out, and the distribution law of remaining oil was analyzed. Through this study, we could understand the law of water flooding and remaining oil in the high water cut period of bottom water heavy oil reservoir, so as to provide guidance for the development strategy of this type of reservoir in the high water cut period.

Seismic Attribute Gradient Analysis and Reservoir Configuration Study of Shallow Water Delta Reservoir in Huanghekou Sag

The geological conditions of shallow offshore delta oil reservoirs are complex. Under the condition of less well data and larger well spacing, the traditional reservoir configuration method is difficult to solve the detailed study of such reservoirs in offshore oil fields. Based on the comprehensive analysis of the seismic phase, data of well log. The paper identifies criteria of the quaternary configuration boundary in shallow water delta of different types with distributary sand dam is established. At the same time, this paper used sensitive factor to construct the edge detection operator based on the amplitude attribute, characterizing the boundary of sand body thickness mutation or physical property mutation quantitatively, realizing the quantitative characterization of four-stage configuration boundary in the region with no wells or few wells, guiding the efficient development of offshore shallow water delta oilfield, and realizing the increase of storage and production of Bohai oilfield.

Development Model and Quantitative Prediction of Igneous Rock in S Oilfield, the Bohai Sea Area

The structure of S Oilfield of Bohai sea area in China is located in the low uplift slope zone of the Dongwa Laibei area in the Huanghekou depression. The target interval of the oilfield belongs to the Paleogene layered structural oil reservoir under the influence of igneous rocks. Due to the widespread development of igneous rocks, and the diversity of igneous rock types, the structure is complex, and the lateral changes are intense. The differences in volcanic eruption intensity and volcanic materials made the igneous rock masses overlap each other, with rapid changes in lithofacies, and complex seismic reflection structures. Therefore, it was difficult to carry out fine characterization of igneous rocks. Based on the lithofacies model, lithofacies combination types, and seismic response characteristics of volcanic mechanisms, this paper summarized three types of development models of volcanic mechanisms in the study area. At the same time, through technical means such as stratigraphic slicing, seismic attribute extraction, and attribute optimization analysis, the spatial distribution characteristics of various facies zones of igneous rocks at different stages were described in detail, achieving precise prediction of igneous rocks in Bozhong S Oilfield. During the development process of the oilfield, the technical research results guided the optimization of well locations and provided technical support for the efficient development of the oilfield.

Numerical Simulation of Oil and Gas Two-Phase Flow in Deep Condensate Gas Reservoirs in Bohai Buried Hills

The BZ19-6 gas field is characterized by high temperature and high pressure (HTHP), high condensate content, little difference between the formation pressure and dew point pressure, and large amount of reverse condensate liquid. During the early stage of depletion development, the production gas-oil ratio (GOR) and production capacity remain relatively stable, which is inconsistent with the conventional reverse condensate seepage law. In view of the static and dynamic conflict in development and production, indoor high-temperature and high-pressure PVT experiment was carried out to reveal the mist-like condensation phenomenon of fluids in the BZ19-6 formation. And the seepage characteristics of condensate gas reservoirs with various degrees of depletion under the condition of HTHP were analyzed based on production performance. The change rule of fluid phase state was analyzed in response to the characterization difficulties of the seepage mechanism. The fluid state was described using the miscible mechanism. And the interphase permeability interpolation coefficient was introduced based on interfacial tension. By doing so, the accurate characterization of the “single-phase flow of condensate gas-near-miscible mist-like quasi single-phase flow-oil-gas two-phase flow” during the development process was achieved. Then the accurate fitting of key indicators for oilfield development was completed, and the distribution law of formation pressure and the law of condensate oil precipitation under different reservoir conditions are obtained. Based on research results, the regulation strategy of variable flow rate production was developed. Currently, the work system has been optimized for 11 wells, achieving a “zero increase” in the GOS of the gas field and an annual oil increase of 22,000 cubic meters.

Adaptability of Development Methods for Offshore Gas Cap Edge Water Reservoirs under Different Permeability Levels

The BZ 34-1 oilfield is a typical gas cap edge water reservoir in the Bohai oilfield. The main characteristics of the oilfield were multi-phase sand body stacking and the sand body was composed of three parts: gas cap, oil reservoir, and edge water. The actual production site results show that the permeability difference of multi-layer sand bodies has a serious impact on the development effect. This article establishes a typical reservoir model numerical model based on the total recovery degree of the reservoir and the recovery degree of each layer, and analyzes the impact of permeability gradient. As the permeability gradient increases, the total recovery degree of all four well patterns decreases, and the total recovery degree gradually decreases. The recovery degree of low permeability layers gradually decreases, and the recovery degree of high permeability layers gradually increases. As the permeability gradient increases, the degree of recovery gradually decreases under different water contents. As the permeability gradient increases, the reduction rate of remaining oil saturation in low permeability layers is slower, while the reduction rate of remaining oil saturation in high permeability layers was faster. By analyzing the impact of permeability gradient on the development effect of oil fields, we could further deepen our understanding of gas cap edge water reservoirs and guide the development of this type of oil field.