Recent research proves that wings with leading-edge tubercles have the ability to perform efficiently in post-stall region over the conventional straight wing. Moreover, the conventional straight wing outperforms the ...Recent research proves that wings with leading-edge tubercles have the ability to perform efficiently in post-stall region over the conventional straight wing. Moreover, the conventional straight wing outperforms the tubercled wing at a pre-stall region which is quintessential. Even though tubercled wing offers great performance enhancement, because of the complexity of the flow, the trough region of the tubercled wing is more prone to flow separation. Henceforth, the present paper aims at surface blowing – an active flow control technique over the tubercled wing to enhance the aerodynamic efficiency by positively influencing its lift characteristics without causing any additional drag penalty. Flow parameters like blowing velocity ratios and the location of blowing were chosen to find the optimised configuration keeping the amplitude and frequency of the leading-edge tubercles constant as 0.12 c and 0.25 c respectively. Numerical investigations were carried out over the baseline tubercled wing and tubercled wing with surface blowing at various blowing jet velocity ratios 0.5, 1 and 2 over four different chordwise locations ranging from 0.3 c to 0.8 c.The results confirm that blowing at various x/c with different blowing velocity ratios performs better than the conventional tubercled wing. Comparatively, blowing velocity ratio 2 at 0.3 c shows peak performance of about 28% enhancement in the lift characteristics relative to the baseline model. Particularly, in the pre-stall region, 25–50% increase in aerodynamic efficiency is evident over the tubercled wing with surface blowing compared with the baseline case. Additionally,attempts were made to delineate the physical significance of the flow separation mechanism due to blowing by visualizing the streamline pattern.展开更多
基金supported by the Science Engineering Research Board(SERB)Department of Science&Technology(DST)+1 种基金Government of India(No.ECR/2017/001199)SERB/DST for their financial assistance in carrying out this research work through Early Career Research Award
文摘Recent research proves that wings with leading-edge tubercles have the ability to perform efficiently in post-stall region over the conventional straight wing. Moreover, the conventional straight wing outperforms the tubercled wing at a pre-stall region which is quintessential. Even though tubercled wing offers great performance enhancement, because of the complexity of the flow, the trough region of the tubercled wing is more prone to flow separation. Henceforth, the present paper aims at surface blowing – an active flow control technique over the tubercled wing to enhance the aerodynamic efficiency by positively influencing its lift characteristics without causing any additional drag penalty. Flow parameters like blowing velocity ratios and the location of blowing were chosen to find the optimised configuration keeping the amplitude and frequency of the leading-edge tubercles constant as 0.12 c and 0.25 c respectively. Numerical investigations were carried out over the baseline tubercled wing and tubercled wing with surface blowing at various blowing jet velocity ratios 0.5, 1 and 2 over four different chordwise locations ranging from 0.3 c to 0.8 c.The results confirm that blowing at various x/c with different blowing velocity ratios performs better than the conventional tubercled wing. Comparatively, blowing velocity ratio 2 at 0.3 c shows peak performance of about 28% enhancement in the lift characteristics relative to the baseline model. Particularly, in the pre-stall region, 25–50% increase in aerodynamic efficiency is evident over the tubercled wing with surface blowing compared with the baseline case. Additionally,attempts were made to delineate the physical significance of the flow separation mechanism due to blowing by visualizing the streamline pattern.
