单个裂隙中油运移实验及特征分析

利用狭窄平行板裂隙模型来模拟和分析单个裂隙内油运移的过程。实验中采用表面起伏的玻璃板制作平行板裂隙模型,通过改变水中蔗糖的浓度控制两相流体间的密度差,来分析不同密度差和注入速率条件下油的运移过程和特征。观察发现,油在饱含水的狭窄裂隙空间内的运移特征与在孔隙介质中的运移有相似之处:运移的路径只占通道的一部分,都具有不规则的分形特征,也可形成活塞式、指进式和路径式等模式。而这些模式的形成也同样受各种因素的影响。利用孔隙介质中油运移实验结果总结出来的、以Bo数和Ca数为纵横坐标运移相图完全可以用来表征单个裂隙中油的运移模式。

伺服阀与比例阀静态性能测试台的建立

通过某钢厂伺服阀与比例阀静态性能测试台的建立,该文介绍了测试台的液压控制原理,阐述了伺服阀与比例阀静态性能的测试方法。

基于IOS系统“悦动”app设计与开发

本文基于IOS系统设计了一款运动类“悦动”app软件,探讨了IOS系统在应用开发中常用的框架、编码语言、开发设计原则等问题。该款app实现了对运动轨迹绘制、运动数据的显示、运动数据的浏览等功能,可以较好的满足用户对自身运动数据的关注及了解。

TRP channels in prostate cancer： the good, the bad and the ugly？

During the last decade, transient receptor potential （TRP） channels emerge as key proteins in central mechanisms of the carcinogenesis such as cell proliferation, apoptosis and migration. Initial studies showed that expression profile of some TRP channels, notably TRP melastatin 8 （TRPM8）, TRP vanilloid 6 （TRPV6）,TRP canonical （TRPC6） and TRPV2, is changing during the development and the progression of prostate cancer towards the hormone-refractory stages. The link between the change in expression levels and the functional role of these channels in prostate cancer is step by step being elucidated. These recent advances are here described and discussed.

Effect of stocking density on performances of juvenile turbot (Scophthalmus maximus) in recirculating aquaculture systems

Limited information has been available about the influence of loading density on the performances of Scophthalmus maximus, especially in recirculating aquaculture systems （RAS）. In this study, turbot （13.84±2.74 g; average weigh±SD） were reared at four different initial densities （low 0.66, medium 1.26, sub-high 2.56, high 4.00 kg/m^2） for 10 weeks in RAS at 23±1℃ Final densities were 4.67, 7.25, 14.16, and 17.47 kg/m^2, respectively, which translate to 82, 108, 214, and 282 percent coverage of the tank bottom. Density had both negative and independent impacts on growth. The final mean weight, specific growth rate （SGR）, and voluntary feed intake significantly decreased and the coefficient of variation （CV） of final body weight increased with increase in stocking density. The medium and sub-high density groups did not differ significantly in SGR, mean weight, CV, food conversion rate （FCR）, feed intake, blood parameters, and digestive enzymes. The protease activities of the digestive tract at pH 7, 8.5, 9, and 10 were significantly higher for the highest density group, but tended to be lower （not significantly） at pH 4 and 8.5 for the lowest density group. The intensity of protease activity was inversely related to feed intake at the different densities. Catalase activity was higher （but not significantly） at the highest density, perhaps because high density started to induce an oxidative effect in turbot. In conclusion, turbot can be cultured in RAS at a density of less than 17.47 kg/m^2. With good water quality and no feed limitation, initial density between 1.26 and 2.56 kg/m^2 （final： 7.25 and 14.16 kg/m^2） would not negatively affect the turbot cultured in RAS. For culture at higher density, multi-level feeding devices are suggested to ease feeding competition.

Oxidative dehydrogenation of propane under steady-state and transient regimes over alumina-supported catalysts prepared from mixed V_2W_4O_(19)^(4-) hexametalate precursors

An integrated approach combining the development of an innovative catalyst and the research of a set of adequate operating conditions for the propane oxidative dehydrogenation （ODH） is described.The experimental set-up,specially designed for steady-state and transient studies is presented.The preparation method,the characterization and the performances in steady-state and transient regimes of catalysts based on V2W4O194-Lindqvist isopolyanion used as a precursor and supported on alumina are reported.The influence of the preparation method of the catalyst and the role of water in the feed gas are more particularly discussed.

Solutions to Right Conflicts and Integrated Protection of Diverse Interests in Real EstateDevelopment and Operation

In the development and operation of real estate, real estate development enterprises as the principal subject would often establish contractual relationships with subjects of diverse interests including removed households, banks, construction project contractors, and buyers. At times, conflicts of interests might occur among these contractual subjects requesting civil and commercial claims of the same subject matter based on agreements or legal rights. As for the causes of these conflicts and their solutions, a majority of existing researches still stay at the superficial causes from the perspective of civil and commercial law, and the solution of determining the order of priority of compensation of related rights. Due to the lack of research into deep-seated reasons and solutions from the perspective of economic law, the current legislative and judicial approaches to this kind of problems tend to give more protection to the rights of one subject while lack sufficient attention to other subjects. This paper attempts to carry out analyses and research on the causes and solutions to this kind of conflicts from the perspective of economic law, to achieve integrated protection of diverse interests in real estate development and operation so as to better safeguard the order in real estate development and operation and facilitate the healthy and ordered development of the real estate industry.

Catalytic Partial Oxidation of Biomass/Oil Mixture

Investigation was focussed to application of waste POX （partial oxidation）, e.g., meal rape in form of suspension in high boiling hydrocarbons from crude oil distillation. There is an opportunity for utilization of biomass waste resulted from fuels bio-components production. A decrease of oxygen and water steam demand in feed for POX process was observed in this variant. Catalytic effect of iron nanoparticles or nickel nitrate as catalysts in improvement of the pilot plant biomass/oil partial oxidation was investigated as well. Presence of catalyst in the feed supports formation of carbon monoxide and suppression content of methane in the gas product. Experimental data were well compared with process simulation based on eauilibrium reactor model.

珠江流域盆地表层沉积物的黏土矿物及其对南海沉积物的贡献

黏土矿物以其示踪洋流变化和揭示物源区陆地同时期气候变化的能力，近年来在南海东亚季风演化的研究中起到了重要作用．珠江作为南海北部陆源物质输入的重要河流之一，以往的研究还没有开展过详细的黏土矿物学工作．运用X射线衍射方法，系统地研究了珠江流域盆地（包括珠江主流、各支流和珠江口伶仃洋）表层沉积物的黏土矿物组合．结果显示，珠江流域盆地黏土矿物组合主要由高岭石（35％-65％）、绿泥石（20％～35％）和伊利石（12％～42％）组成，蒙脱石含量一般小于5％，区域分布上不具明显的差异性．但是，从珠江流域盆地到南海北部，高岭石含量持续降低，蒙脱石含量持续上升。伊利石含量也不断上升，伊利石化学指数递减，伊利石结晶度增强，这些特征都表明珠江流域盆地对南海北部黏土矿物的贡献主要是高岭石，其次是伊利石和绿泥石，基本不提供蒙脱石．研究认为。珠江对南海北部陆缘的黏土矿物贡献率最多为72％，而对北部陆坡的贡献率最多仅为15％．无论是冰期还是间冰期时期，高岭石都指示了珠江流域的机械侵蚀能力．

湖北宜昌地区下-中奥陶统界线疑源类生物地层学意义

根据牙形类Baltoniodus?triangularis的首现,中奥陶统和大坪阶底界已界定于湖北宜昌黄花场剖面大湾组底界之上10.57 m。对黄花场剖面以及邻近的大坪剖面大湾组疑源类研究表明,某些疑源类属种具有生物地层学意义,其首现可用于识别奥陶系下/中统界线。

Clay minerals in surface sediments of the Pearl River drainage basin and their contribution to the South China Sea

Clay minerals have played a significant role in the study of the East Asian monsoon evolution in the South China Sea by being able to track oceanic current variations and to reveal contemporaneous pa- leoclimatic changes prevailing in continental source areas.As one of the most important rivers input- ting terrigenous matters to the northern South China Sea,the Pearl River was not previously paid at- tention to from the viewpoint of clay mineralogy.This paper presents a detailed study on clay minerals in surface sediments collected from the Pearl River drainage basin(including all three main channels, various branches,and the Lingdingyang in the estuary)by using the X-ray diffraction(XRD)method. The results indicate that the clay mineral assemblage consists dominantly of kaolinite(35%-65%), lesser abundance of chlorite(20%-35%)and illite(12%-42%),and very scare smectite occurrences (generally<5%).Their respective distribution does not present any obvious difference throughout the Pearl River drainage basin.However,downstream the Pearl River to the northern South China Sea,the clay mineral assemblage varies significantly:kaolinite decreases gradually,smectite and illite increase gradually.Additionally,illite chemistry index steps down and illite crystallinity steps up.These varia- tions indicate the contribution of major kaolinite,lesser illite and chlorite,and very scarce smectite to the northern South China Sea from the Pearl River drainage basin.The maximum contribution of clay minerals from the Pearl River is 72%to the northern margin and only 15%to the northern slope of the South China Sea.In both glacials and interglacials,kaolinite indicates that the ability of mechanical erosion occurred in the Pearl River drainage basin.

Millimeter wave band ultra wideband transmitter MMIC

This paper presents a new millimeter-wave （MMW） ultra wideband （UWB） transmitter MMIC which has been developed in an OMMIC 0.1 μm GaAs PHEMT foundry process （ft= 100 GHz） for 22-29 GHz vehicular radar systems. The transmitter is composed of an MMW negative resistance oscillator （NRO）, a power amplifier （PA）, and two UWB pulse generators （PGs）. In order to convert the UWB pulse signal to MMW frequency and reduce the total power consumption, the MMW NRO is driven by one of the UWB pulse generators and the power amplifier is triggered by another UWB pulse generator. The main advantages of this transmitter are： new design, simple architecture, high-precision distance measurements, infinite ON/OFF switch ratio, and low power consumption. The total power consumption of the transmitter MMIC is 218 mW with a peak output power of 5.5 dBm at 27 GHz.

Formation of AlN Nano Particles Precipitated in St-14 Low Carbon Steel by Micro and Nanoscopic Observations

In low carbon steels, dissolution and precipitation of the second phases such as carbides and nitrides during annealing cycles can affect the final structure and properties of the materials. The interaction of above processes depends on parameters such as reheating temperature, heating rate, annealing temperature, soaking time and finishing temperature in hot rolling stage before cold rolling. The effects of heating rate and annealing temperature on the microstructure and hardness were investigated. Two heating rates for annealing temperatures of 550, 610 and 720℃ were applied on cold-rolled specimens and St-14 low carbon steel, which were immediately quenched after isothermal annealing. The intercept method was used tO measure average grain sizes. However, resulted microstructures are dif- ferent for the two heating rates. While pancaked structures were observed in specimens annealed with low heating rate, in samples annealed with high heating rate, equiaxed microstructures were observed. Vickers micro-hardness values decreased at all temperatures, which were more significant at higher temperatures. At longer annealing time, signs of increase of hardness values were detected. All results and observations consistently suggest that a precipitati- on process has occurred concurrently with restoration processes during annealing. In addition, the energy dispersive spectroscopy analysis resulted from transmission electron microscopic micrographs have proved that the nano particles precipitated in grain boundaries are AlN.