A simple approach is proposed to describe the experimental data for the widths of the fission-fragment mass yields in^(197)Au and^(209)Bi at low and intermediate energies.The approach is based on the expressions for t...A simple approach is proposed to describe the experimental data for the widths of the fission-fragment mass yields in^(197)Au and^(209)Bi at low and intermediate energies.The approach is based on the expressions for the temperature dependence of the width of the fission-fragment mass yield and the mass of the most probable fragment.The expression for the width of the fission-fragment mass yield depends on the mass of the most probable fragment,the surface terms of the energy level density parameter,the temperature and the stiffness parameter of the potential related to mass-asymmetric degree of freedom.It is shown that the contribution of the surface term of the energy level density parameter is important for describing the experimental data in a wide range of energies.展开更多
文摘A simple approach is proposed to describe the experimental data for the widths of the fission-fragment mass yields in^(197)Au and^(209)Bi at low and intermediate energies.The approach is based on the expressions for the temperature dependence of the width of the fission-fragment mass yield and the mass of the most probable fragment.The expression for the width of the fission-fragment mass yield depends on the mass of the most probable fragment,the surface terms of the energy level density parameter,the temperature and the stiffness parameter of the potential related to mass-asymmetric degree of freedom.It is shown that the contribution of the surface term of the energy level density parameter is important for describing the experimental data in a wide range of energies.
基金The authors acknowledge the Science and Technology Center in Ukraine (STCU) for financial support to this researchProf. J. A. Szpunar, McGill University of Canada, Prof. N. S. Spyrellis, National Technical University of Athens of Greece, and Dr. G. R. Stafford, National Institute of Standards and Technology of USA for the discussion of preliminary results of the work as well as industrial company Companhia Siderurgica Nacional of Brazil for the discussion of possible ways of commercialization of the obtained results.
文摘采用 X 射线衍射研究了在接近工业条件下制备的无锡钢上薄镀铬层(0.03 μm或每面 0.22 g/m2)的晶体织构特征。实验发现,铬镀层的晶体结构含以下组分:以垂直于镀层表面的[111]为轴心的轴向分量,(111)[112]受限分量以及一个自由分量。其中[111]轴向分量为主要织构分量,是初始阶段的生长织构;(111)[112]受限分量为次要织构分量,代表了外延生长。无锡钢上镀铬层织构与亚结构的定量特征之间的规律性变化取决于沉积参数。影响无锡钢上薄镀铬层机械寿命的主要因素之一是镀层中[111]轴向织构的形成。
