In this paper,a series of LaMnO_(3+δ)(LMOs)were successfully prepared by adjusting the sintering temperature using the sol-gel method with ABO3-type LMO oxides as the object of study.The results showed that with the ...In this paper,a series of LaMnO_(3+δ)(LMOs)were successfully prepared by adjusting the sintering temperature using the sol-gel method with ABO3-type LMO oxides as the object of study.The results showed that with the increase of sintering temperature,the O_(ads),oxygen vacancies,and Mn^(4+)content in the system gradually decreased,and the oxygen evolution reaction(OER)was subsequently weakened.Although the suitable Mn^(3+)/Mn^(4+)valence ratio(2.15:1)of the LMO700 sample created a strong ferromagnetic double-exchange effect,the high concentration of oxygen vacancies in LMO700 disturbed this effect and weakened its macro magnetism.This paper serves to contribute to the design and development of new magnetic perovskite electrocatalysts.展开更多
β-SiC nanoparticle reinforced A1 matrix （nano-SiCp/A1） composite was prepared by a multi- step powder metallurgy strategy including presureless sintering, hot compacting process and hot extrusion. The microstructur...β-SiC nanoparticle reinforced A1 matrix （nano-SiCp/A1） composite was prepared by a multi- step powder metallurgy strategy including presureless sintering, hot compacting process and hot extrusion. The microstructures of the as-prepared composites were observed by scanning electronic microscopy （SEM）, and the mechanical properties were characterized by tensile strength measurement and Brinell hardness test. The experimental results revealed that the tensile strength of the composite with the addition of 5wt%/3-SIC nanoprtieles could be increased to 215 MPa, increasing by 110% compared with pure A1 matrix. Comparative experiments reflected that theβ-SIC nanoprticles showed significant reinforcement effect than traditional a-SiC micro-sized particles. The preparation process and sintering procedure were investigated to develop a cost effective preparation strategy to fabricate nano-SiCp/A1 composite.展开更多
The triangulation of red sprites was obtained, based on concurrent observations over a mesoscale convective system(MCS) in North China from two stations separated by about 450 km. In addition, broadband sferics from t...The triangulation of red sprites was obtained, based on concurrent observations over a mesoscale convective system(MCS) in North China from two stations separated by about 450 km. In addition, broadband sferics from the sprite-producing lightning were measured at five ground stations, making it possible to locate and identify the individual causative lightning discharges for different elements in this dancing sprite event. The results of our analyses indicate that the sprites were produced above the trailing stratiform region of the MCS, and their parent strokes were located mainly in the peripheral area of the stratiform. The lateral offset between sprites and causative strokes ranges from a few km to more than 50 km. In a particularly bright sprite, with a distinct halo feature and streamers descending down to an altitude of approximately 48 km, the sprite current signal identified in the electric sferic, measured at a range of about 1,110 km, peaked at approximately 1 ms after the return stroke.展开更多
基金Open Foundation of Hubei Key Laboratory of Industrial Fume and Dust Pollution Control(Grants No.:HBIK2022-12)Hubei Natural Science Foundation(Grant number:2022CFC012).
文摘In this paper,a series of LaMnO_(3+δ)(LMOs)were successfully prepared by adjusting the sintering temperature using the sol-gel method with ABO3-type LMO oxides as the object of study.The results showed that with the increase of sintering temperature,the O_(ads),oxygen vacancies,and Mn^(4+)content in the system gradually decreased,and the oxygen evolution reaction(OER)was subsequently weakened.Although the suitable Mn^(3+)/Mn^(4+)valence ratio(2.15:1)of the LMO700 sample created a strong ferromagnetic double-exchange effect,the high concentration of oxygen vacancies in LMO700 disturbed this effect and weakened its macro magnetism.This paper serves to contribute to the design and development of new magnetic perovskite electrocatalysts.
基金Funded by the Research Collaborative Innovation Project of Jiangsu Province,China(BY2009129)the Science and Technology Project of Suzhou,China(SYG0905)
文摘β-SiC nanoparticle reinforced A1 matrix （nano-SiCp/A1） composite was prepared by a multi- step powder metallurgy strategy including presureless sintering, hot compacting process and hot extrusion. The microstructures of the as-prepared composites were observed by scanning electronic microscopy （SEM）, and the mechanical properties were characterized by tensile strength measurement and Brinell hardness test. The experimental results revealed that the tensile strength of the composite with the addition of 5wt%/3-SIC nanoprtieles could be increased to 215 MPa, increasing by 110% compared with pure A1 matrix. Comparative experiments reflected that theβ-SIC nanoprticles showed significant reinforcement effect than traditional a-SiC micro-sized particles. The preparation process and sintering procedure were investigated to develop a cost effective preparation strategy to fabricate nano-SiCp/A1 composite.
基金supported by the National Key Basic Research and Development Program (2017YFC1501501)National Natural Science Foundation of China (41574179, 41875006)+4 种基金National Natural Science Foundation for Excellent Youth of China (41622501)"The Hundred Talents Program" of Chinese Academy of Sciences (2013068)supported by funding from the NOAA Office of Global Programs for the Global Precipitation Climatology Project (GPCP)by NASA via the Tropical Rainfall Measuring Mission (TRMM)supported by NASA's HQ Earth S cience Data Systems (ESDS) Program
文摘The triangulation of red sprites was obtained, based on concurrent observations over a mesoscale convective system(MCS) in North China from two stations separated by about 450 km. In addition, broadband sferics from the sprite-producing lightning were measured at five ground stations, making it possible to locate and identify the individual causative lightning discharges for different elements in this dancing sprite event. The results of our analyses indicate that the sprites were produced above the trailing stratiform region of the MCS, and their parent strokes were located mainly in the peripheral area of the stratiform. The lateral offset between sprites and causative strokes ranges from a few km to more than 50 km. In a particularly bright sprite, with a distinct halo feature and streamers descending down to an altitude of approximately 48 km, the sprite current signal identified in the electric sferic, measured at a range of about 1,110 km, peaked at approximately 1 ms after the return stroke.
