Halide perovskites with excellent piezoelectric properties,but their poor stability hinders their largescale application.Herein,a sandwich-structured halide perovskite flexible sensor with good stability was developed...Halide perovskites with excellent piezoelectric properties,but their poor stability hinders their largescale application.Herein,a sandwich-structured halide perovskite flexible sensor with good stability was developed according to a three-step procedure as follows:(ⅰ) in-situ growth of wool keratinCsPbBr_(3)(WK-CsPbBr_(3)) using wool keratin in interfacial passivation and coating,(ⅱ) electrospinning of a wool keratin-CsPbBr_(3)/polyacrylonitrile(WCP) nanofiber film,and(ⅲ) coating of the WCP nanofiber with polydimethylsiloxane(PDMS) to obtain a sensor(WCPP).The sensor could generate a piezoelectric voltage of 7.8 V at a pressure of 6 kPa in the stages of pressing and releasing,and the output characteristics did not decline even after 10,000 cycles.Compared to the 4-month stability of the perovskite sensor,WCPP sensor exhibited the output performance even after 16 months,which indicated that wool keratin as a multidentate improved the stability of the halide perovskite.Additionally,the sensor displayed a self-cleaning property and could also light up 14 commercial LEDs.The close-loop recycling of the lead halide perovskite was achieved by dissolving the WCP nanofiber film in DMF and then reelectrospinning.Therefore,the method proposed is a step forward for achieving the commercialization of WK-CsPbBr_(3) and providing new avenues for further utilization of wool waste.展开更多
It is urgent to develop low-reflection electromagnetic interference shielding material to shield electromagnetic waves(EMW)and reduce their secondary radiation pollution.Herein,an electromagnetic interference shieldin...It is urgent to develop low-reflection electromagnetic interference shielding material to shield electromagnetic waves(EMW)and reduce their secondary radiation pollution.Herein,an electromagnetic interference shielding nanofiber film is composed of ZnO and carbon nanofiber(CNF)via electrospinning and carbonization approachs,and subsequently coating perfuorooctyltriethoxysilane as a protective layer.On the one hand,ZnO coated by porous carbon,which is derived from ZIF-8,endows the nanofiber film low reflection property through optimizing impedance matching between free space and the nanofiber film.On the other hand,the nanofiber film possesses high electromagnetic interference shielding efficiency,which is beneficial by excellent electrical conductivity of CNF derived from waste leather scraps.Furthermore,the nanofiber film involves abundant interface,which contributes to high interfacial polarization loss.Thus,the nanofiber film with a thickness of 250 pm has electrical conductivity of 53 S/m and shielding efficiency of 50 dB.The reflection coefficient of the nanofiber film is inferior to 0.4 indicates that most of EMW are absorbed inside the materials and the nanofiber film is effective in reducing secondary radiation contamination of electromagnetic waves.Fortunately,the nanofiber film exhibits outstanding solar harvesting performance(106℃at 1 sun density)and good self-cleaning performance,which ensure that the nanofiber film can work in harsh environments.This work supplies a credible reference for fabricating low-reflection electromagnetic shielding nanofiber film to reduce secondary radiation pollution and facilitates the upcycling of waste leather scraps.展开更多
Flexible strain sensors are capable to detect external force induced strain change owing to their unique ability to convert deformation into electrical signals.Generally,micro/nano patterning of conductive layer in st...Flexible strain sensors are capable to detect external force induced strain change owing to their unique ability to convert deformation into electrical signals.Generally,micro/nano patterning of conductive layer in strain sensor is an effective method to improve its sensitivity,however the sophisticated manipulation process is limited only in laboratory scale.In this report,a simple and scalable fabrication strategy was used to create micro-cracking conductive layer as an alternative patterning method to achieve high performance of strain sensor.In details,the sensor was fabricated using leather as the substrate to filtrated acidified multi-walled carbon nanotubes(a-MWCNTs)/layered double hydroxides(LDHs)suspension.During stretching process,micro-cracking structure emerged on the percolated a-MWCNTs/LDHs layer,causing a rise up of resistance according to increasing strain and generated a detectable electrical signal.The prepared sensor had a large detecting range(60%),high sensitivity(GF of 7238.92 at strain 30-60%),fast response(tensile response time of 270 ms),good stability and repeatability.The sensor also inherited the advantages of leather,such as biodegradability and good air permeability,and the introduction of a-MWCNTs/LDHs further enhanced its fire retardancy properties.These features ensured the sensor as an eco-friendly,comfortable and safe electronic device for human motion detection.展开更多
基金funded by the National Natural Science Foundation of China (22178210)the Innovation Capability Support Program of Shaanxi (2021TD-16)+1 种基金Key Project of Natural Science Basic Research Program of Shaanxi Province (2023JC-XJ-12)the Shaanxi Provincial “Special Support Plan for High-level Talents”。
文摘Halide perovskites with excellent piezoelectric properties,but their poor stability hinders their largescale application.Herein,a sandwich-structured halide perovskite flexible sensor with good stability was developed according to a three-step procedure as follows:(ⅰ) in-situ growth of wool keratinCsPbBr_(3)(WK-CsPbBr_(3)) using wool keratin in interfacial passivation and coating,(ⅱ) electrospinning of a wool keratin-CsPbBr_(3)/polyacrylonitrile(WCP) nanofiber film,and(ⅲ) coating of the WCP nanofiber with polydimethylsiloxane(PDMS) to obtain a sensor(WCPP).The sensor could generate a piezoelectric voltage of 7.8 V at a pressure of 6 kPa in the stages of pressing and releasing,and the output characteristics did not decline even after 10,000 cycles.Compared to the 4-month stability of the perovskite sensor,WCPP sensor exhibited the output performance even after 16 months,which indicated that wool keratin as a multidentate improved the stability of the halide perovskite.Additionally,the sensor displayed a self-cleaning property and could also light up 14 commercial LEDs.The close-loop recycling of the lead halide perovskite was achieved by dissolving the WCP nanofiber film in DMF and then reelectrospinning.Therefore,the method proposed is a step forward for achieving the commercialization of WK-CsPbBr_(3) and providing new avenues for further utilization of wool waste.
基金funded by the Shaanxi Provincial“Special Support Plan for High-level Talents”the Key Project of Natural Science Basic Research Program of Shaanxi Province(Special Support)(Program No.2023JC-XJ-12)the Innovation Capability Support Program of Shaanxi(Program No.2021TD-16).
文摘It is urgent to develop low-reflection electromagnetic interference shielding material to shield electromagnetic waves(EMW)and reduce their secondary radiation pollution.Herein,an electromagnetic interference shielding nanofiber film is composed of ZnO and carbon nanofiber(CNF)via electrospinning and carbonization approachs,and subsequently coating perfuorooctyltriethoxysilane as a protective layer.On the one hand,ZnO coated by porous carbon,which is derived from ZIF-8,endows the nanofiber film low reflection property through optimizing impedance matching between free space and the nanofiber film.On the other hand,the nanofiber film possesses high electromagnetic interference shielding efficiency,which is beneficial by excellent electrical conductivity of CNF derived from waste leather scraps.Furthermore,the nanofiber film involves abundant interface,which contributes to high interfacial polarization loss.Thus,the nanofiber film with a thickness of 250 pm has electrical conductivity of 53 S/m and shielding efficiency of 50 dB.The reflection coefficient of the nanofiber film is inferior to 0.4 indicates that most of EMW are absorbed inside the materials and the nanofiber film is effective in reducing secondary radiation contamination of electromagnetic waves.Fortunately,the nanofiber film exhibits outstanding solar harvesting performance(106℃at 1 sun density)and good self-cleaning performance,which ensure that the nanofiber film can work in harsh environments.This work supplies a credible reference for fabricating low-reflection electromagnetic shielding nanofiber film to reduce secondary radiation pollution and facilitates the upcycling of waste leather scraps.
基金supported by the National Natural Science Foundation of China(No.51903143)Special Foundation for Science and Technology Major Plan of Xianyang(No.2018k01-46).
文摘Flexible strain sensors are capable to detect external force induced strain change owing to their unique ability to convert deformation into electrical signals.Generally,micro/nano patterning of conductive layer in strain sensor is an effective method to improve its sensitivity,however the sophisticated manipulation process is limited only in laboratory scale.In this report,a simple and scalable fabrication strategy was used to create micro-cracking conductive layer as an alternative patterning method to achieve high performance of strain sensor.In details,the sensor was fabricated using leather as the substrate to filtrated acidified multi-walled carbon nanotubes(a-MWCNTs)/layered double hydroxides(LDHs)suspension.During stretching process,micro-cracking structure emerged on the percolated a-MWCNTs/LDHs layer,causing a rise up of resistance according to increasing strain and generated a detectable electrical signal.The prepared sensor had a large detecting range(60%),high sensitivity(GF of 7238.92 at strain 30-60%),fast response(tensile response time of 270 ms),good stability and repeatability.The sensor also inherited the advantages of leather,such as biodegradability and good air permeability,and the introduction of a-MWCNTs/LDHs further enhanced its fire retardancy properties.These features ensured the sensor as an eco-friendly,comfortable and safe electronic device for human motion detection.