Researches on preconditioned wire arrayZpinches in Xi’an Jiaotong University

The dynamics of wire array Z pinches are greatly affected by the initial state of the wires,which can be preconditioned by a prepulse current.Recent advances in experimental research on preconditioned wire array Z pinches at Xi’an Jiaotong University are presented in this paper.Single-wire explosion experiments were carried out to check the state of the preconditioning and to obtain the current parameters needed for wire gasification.Double-wire explosion experiments were conducted to investigate the temporal evolution of the density distribution of the two gasified wires.Based on the results of these experiments,a double-pulse Z-pinch facility,Qin-1,in which a 10 kA prepulse current was coupled with the 0.8 MA main current was designed and constructed.Wire arrays of different wire materials,including silver and tungsten,can be preconditioned by the prepulse current to a gaseous state.Implosion of the two preconditioned aluminum wires exhibited no ablation and little trailing mass.

Improved rate and cycling performances of Na_(3)V_(2)(PO_(4))_(2)F_(2)O by Ti^(3+/4+)doping with two oxidation states for sodium cathodes

Ti at the oxidation states of Ti^(3+)and Ti^(4+),was used to enhance the performance of Na_(3)V_(2)(PO_(4))_(2)F_(2)O by partially substituting vanadium.After doping Ti,the crystallographic volume is decreased due to the less radii of Ti^(3+/4+),and the valence of Ti is demonstrated identical to V.During sodium insertion in Ti-doped Na_(3)V_(2)(PO_(4))_(2)F_(2)O,the two discharge plateaus split into three because of the rearrangement of local redox environment.Consequently,the optimized Na_(3)V_(0.96)Ti_(0.04)(PO_(4))_(2)F_(2)O shows a specific capacity of 123 and 63 mA·h/g at 0.1C and 20C,respectively.After 350 cycles at 0.5C,the capacity is gradually reduced corresponding to a retention of 71.05%.The significantly improved performance is attributed to the rapid electrochemical kinetics,and showcases the strategy of replacing V^(3+/4+)with Ti^(3+/4+)for high-performance vanadium-based oxyfluorophosphates.

Advances and challenges in direct additive manufacturing of dense ceramic oxides

Ceramic oxides,renowned for their exceptional combination of mechanical,thermal,and chemical properties,are indispensable in numerous crucial applications across diverse engineering fields.However,conventional manufacturing methods frequently grapple with limitations,such as challenges in shaping intricate geometries,extended processing durations,elevated porosity,and substantial shrinkage deformations.Direct additive manufacturing(dAM)technology stands out as a state-of-the-art solution for ceramic oxides production.It facilitates the one-step fabrication of high-performance,intricately designed components characterized by dense structures.Importantly,dAM eliminates the necessity for post-heat treatments,streamlining the manufacturing process and enhancing overall efficiency.This study undertakes a comprehensive review of recent developments in dAM for ceramic oxides,with a specific emphasis on the laser powder bed fusion and laser directed energy deposition techniques.A thorough investigation is conducted into the shaping quality,microstructure,and properties of diverse ceramic oxides produced through dAM.Critical examination is given to key aspects including feedstock preparation,laser-material coupling,formation and control of defects,in-situ monitoring and simulation.This paper concludes by outlining future trends and potential breakthrough directions,taking into account current gaps in this rapidly evolving field.

Moderate Fields, Maximum Potential: Achieving High Records with Temperature‑Stable Energy Storage in Lead‑Free BNT‑Based Ceramics

The increasing awareness of environmental concerns has prompted a surge in the exploration of leadfree,high-power ceramic capacitors.Ongoing efforts to develop leadfree dielectric ceramics with exceptional energystorage performance(ESP)have predominantly relied on multicomponent composite strategies,often accomplished under ultrahigh electric fields.However,this approach poses challenges in insulation and system downsizing due to the necessary working voltage under such conditions.Despite extensive study,bulk ceramics of(Bi_(0.5)Na_(0.5))TiO_(3)(BNT),a prominent lead-free dielectric ceramic family,have seldom achieved a recoverable energy-storage(ES)density(Wrec)exceeding 7 J cm^(−3).This study introduces a novel approach to attain ceramic capacitors with high ESP under moderate electric fields by regulating permittivity based on a linear dielectric model,enhancing insulation quality,and engineering domain structures through chemical formula optimization.The incorporation of SrTiO_(3)(ST)into the BNT matrix is revealed to reduce the dielectric constant,while the addition of Bi(Mg_(2/3)Nb_(1/3))O_(3)(BMN)aids in maintaining polarization.Additionally,the study elucidates the methodology to achieve high ESP at moderate electric fields ranging from 300 to 500 kV cm^(−1).In our optimized composition,0.5(Bi_(0.5)Na_(0.4)K_(0.1))TiO_(3)–0.5(2/3ST-1/3BMN)(B-0.5SB)ceramics,we achieved a Wrec of 7.19 J cm^(−3) with an efficiency of 93.8%at 460 kV cm^(−1).Impressively,the B-0.5SB ceramics exhibit remarkable thermal stability between 30 and 140℃ under 365 kV cm^(−1),maintaining a Wrec exceeding 5 J cm^(−3).This study not only establishes the B-0.5SB ceramics as promising candidates for ES materials but also demonstrates the feasibility of optimizing ESP by modifying the dielectric constant under specific electric field conditions.Simultaneously,it provides valuable insights for the future design of ceramic capacitors with high ESP under constraints of limited electric field.

High-Quality van der Waals Epitaxial CsPbBr_(3)Film Grown on Monolayer Graphene Covered TiO_(2)for High-Performance Solar Cells

Two-dimensional materials have been widely used to tune the growth and energy-level alignment of perovskites.However,their incomplete passivation and chaotic usage amounts are not conducive to the preparation of highquality perovskite films.Herein,we succeeded in obtaining higher-quality CsPbBr_(3)films by introducing large-area monolayer graphene as a stable physical overlay on top of TiO_(2)substrates.Benefiting from the inert and atomic smooth graphene surface,the CsPbBr_(3)film grown on top by the van der Waal epitaxy has higher crystallinity,improved(100)orientation,and an average domain size of up to 1.22μm.Meanwhile,a strong downward band bending is observed at the graphene/perovskite interface,improving the electron extraction to the electron transport layers(ETL).As a result,perovskite film grown on graphene has lower photoluminescence(PL)intensity,shorter carrier lifetime,and fewer defects.Finally,a photovoltaic device based on epitaxy CsPbBr_(3)film is fabricated,exhibiting power conversion efficiency(PCE)of up to 10.64%and stability over 2000 h in the air.

Coaxial electrohydrodynamic printing of core–shell microfibrous scaffolds with layer-specific growth factors release for enthesis regeneration

The rotator cuff tear has emerged as a significant global health concern.However,existing therapies fail to fully restore the intricate bone-to-tendon gradients,resulting in compromised biomechanical functionalities of the reconstructed enthesis tissues.Herein,a tri-layered core–shell microfibrous scaffold with layer-specific growth factors(GFs)release is developed using coaxial electrohydrodynamic(EHD)printing for in situ cell recruitment and differentiation to facilitate gradient enthesis tissue repair.Stromal cell-derived factor-1(SDF-1)is loaded in the shell,while basic fibroblast GF,transforming GF-beta,and bone morphogenetic protein-2 are loaded in the core of the EHD-printed microfibrous scaffolds in a layer-specific manner.Correspondingly,the tri-layered microfibrous scaffolds have a core–shell fiber size of(25.7±5.1)μm,with a pore size sequentially increasing from(81.5±4.6)μm to(173.3±6.9)μm,and to(388.9±6.9μm)for the tenogenic,chondrogenic,and osteogenic instructive layers.A rapid release of embedded GFs is observed within the first 2 d,followed by a faster release of SDF-1 and a slightly slower release of differentiation GFs for approximately four weeks.The coaxial EHD-printed microfibrous scaffolds significantly promote stem cell recruitment and direct their differentiation toward tenocyte,chondrocyte,and osteocyte phenotypes in vitro.When implanted in vivo,the tri-layered core–shell microfibrous scaffolds rapidly restored the biomechanical functions and promoted enthesis tissue regeneration with native-like bone-to-tendon gradients.Our findings suggest that the microfibrous scaffolds with layer-specific GFs release may offer a promising clinical solution for enthesis regeneration.

Circulating RNA ZFR promotes hepatocellular carcinoma cell proliferation and epithelial-mesenchymal transition process through miR-624-3p/WEE1 axis

Background:Hepatocellular carcinoma(HCC),the most common type of primary liver cancer,is the fourth leading cause of cancer-related deaths worldwide.Previous evidence shows that the expression of circulating RNA ZFR(circZFR)is upregulated in HCC tissues.However,the molecular mechanism of circZFR in HCC is unclear.Methods:Quantitative reverse transcriptase polymerase chain reaction(qRT-PCR)was employed to detect the expression of circZFR,microRNA-624-3p(miR-624-3p)and WEE1 in HCC tissues and cells.RNase R assay and actinomycin D treatment assay were used to analyze the characteristics of circZFR.For functional analysis,the capacities of colony formation,cell proliferation,cell apoptosis,migration and invasion were assessed by colony formation assay,5-ethynyl-2-deoxyuridine(EdU)assay,flow cytometry assay and transwell assay.Western blot was used to examine the protein levels of WEE1 and epithelial-mesenchymal transition(EMT)-related proteins.The interactions between miR-624-3p and circZFR or WEE1 were validated by dual-luciferase reporter assay and RNA immunoprecipitation(RIP)assay.Xenograft models were established to determine the role of circZFR in vivo.Results:circZFR and WEE1 were upregulated,while miR-624-3p expression was reduced in HCC tissues and cells.circZFR could sponge miR-624-3p,and WEE1 was a downstream gene of miR-624-3p.Knockdown of circZFR significantly reduced the malignant behaviors of HCC and that co-transfection with miR624-3p inhibitor restored this change.Overexpression of WEE1 abolished the inhibitory effect of miR624-3p mimic on HCC cells.Mechanistically,circZFR acted as a competitive endogenous RNA(ceRNA)to regulate WEE1 expression by targeting miR-624-3p.Furthermore,in vivo studies have illustrated that circZFR knockdown inhibited tumor growth.Conclusions:circZFR knockdown reduced HCC cell proliferation,migration and invasion and promoted apoptosis by regulating the miR-624-3p/WEE1 axis,suggesting that the circZFR/miR-624-3p/WEE1 axis might be a potential target for HCC treatment.

Heteroatom anchors Fe-Mn dual-atom catalysts with bi-functional oxygen catalytic activity for low-temperature rechargeable flexible Zn-air batteries

M-N-C(M=Fe,Co,Ni,etc.) catalyst owns high catalytic activity in the oxygen catalytic reaction which is the most likely to replace the Pt-based catalysts.But it is still a challenge to further increase the active site density.This article constructs the high-efficiency FeMn-N/S-C-1000 catalyst to realize ORR/OER bifunctional catalysis by hetero-atom,bimetal(Fe,Mn) doped simultaneously strategy.When evaluated it as bi-functional electro-catalysts,FeMn-N/S-C-1000 exhibits excellent catalytic activity(E_(1/2)=0.924 V,E_(j=10)=1.617 V) in alkaline media,outperforms conventional Pt/C,RuO_(2) and most non-precious-metal catalysts reported recently,Such outstanding performance is owing to N,S co-coordinated with metal to form multi-types of single atom,dual atom active sites to carry out bi-catalysis.Importantly,nitrite poison test provides the proof that the active sites of FeMn-N/S-C are more than that of single-atom catalysts to promote catalytic reactions directly.To better understand the local structure of Fe and Mn active sites,XAS and DFT were employed to reveal that FeMn-N_5/S-C site plays the key role during catalysis.Notably,the FeMn-N/S-C-1000 based low-temperature rechargeable flexible Zn-air also exhibits superior discharge performance and extraordinary durability at-40℃.This work will provide a new idea to design diatomic catalysts applied in low-temperature rechargeable batteries.

Twisted Integration of Complex Oxide Magnetoelectric Heterostructures via Water‑Etching and Transfer Process

Manipulating strain mode and degree that can be applied to epitaxial complex oxide thin films have been a cornerstone of strain engineering.In recent years,lift-off and transfer technology of the epitaxial oxide thin films have been developed that enabled the integration of heterostructures without the limitation of material types and crystal orientations.Moreover,twisted integration would provide a more interesting strategy in artificial magnetoelectric heterostructures.A specific twist angle between the ferroelectric and ferromagnetic oxide layers corresponds to the distinct strain regulation modes in the magnetoelectric coupling process,which could provide some insight in to the physical phenomena.In this work,the La_(0.67)Sr_(0.33)MnO_(3)(001)/0.7Pb(Mg_(1/3)Nb_(2/3))O_(3)-0.3PbTiO_(3)(011)(LSMO/PMN-PT)heterostructures with 45.and 0.twist angles were assembled via water-etching and transfer process.The transferred LSMO films exhibit a fourfold magnetic anisotropy with easy axis along LSMO<110>.A coexistence of uniaxial and fourfold magnetic anisotropy with LSMO[110]easy axis is observed for the 45°Sample by applying a 7.2 kV cm^(−1)electrical field,significantly different from a uniaxial anisotropy with LSMO[100]easy axis for the 0°Sample.The fitting of the ferromagnetic resonance field reveals that the strain coupling generated by the 45°twist angle causes different lattice distortion of LSMO,thereby enhancing both the fourfold and uniaxial anisotropy.This work confirms the twisting degrees of freedom for magnetoelectric coupling and opens opportunities for fabricating artificial magnetoelectric heterostructures.

Oxidation behavior of 4774DD1 Ni-based single-crystal superalloy at 980℃ in air

The oxidation behavior of a novel Ni-based single-crystal 4774DD1 superalloy for industrial gas turbine applications was investigated by the isothermal oxidation at 980℃ and discontinuous oxidation weight gain methods.The phase constitution and morphology of surface oxides and the characteristics of the crosssection oxide film were analyzed by XRD,SEM and EDS.Results show that the oxidation kinetics of the 4774DD1 superalloy follows the cubic law,indicating its weak oxidation resistance at this temperature.As the oxidation time increases,the composition of the oxide film evolves as following:One layer consisting of a bottom Al_(2)O_(3)sublayer and an upper(Al_(2)O_(3)+NiO)mixture sublayer after oxidized for 25 h.Then,two layers composed of an outermost small NiO discontinuous grain layer and an internal layer for 75 h.This internal layer is consisted of the bottom Al_(2)O_(3)sublayer,an intermediate narrow CrTaO_(4)sublayer,and an upper(Al_(2)O_(3)+NiO)mixture sublayer.Also two layers comprising an outermost relative continuous NiO layer with large grain size and an internal layer as the oxidation time increases to 125 h.This internal layer is composed of the upper(Al_(2)O_(3)+NiO)mixture sublayer,an intermediate continuous(CrTaO_(4)+NiWO_(4))mixture sublayer,and a bottom Al_(2)O_(3)sublayer.Finally,three layers consisting of an outermost(NiAl2O_(4)+NiCr2O_(4))mixture layer,an intermediate(CrTaO_(4)+NiWO_(4))mixture layer,and a bottom Al_(2)O_(3)layer for 200 h.

Cooperative structure of Li/Ni mixing and stacking faults for achieving high-capacity Co-free Li-rich oxides

Co-free Li-rich layered oxides(LLOs)are emerging as promising cathode materials for Li-ion batteries due to their low cost and high capacity.However,they commonly face severe structural instability and poor electrochemical activity,leading to diminished capacity and voltage performance.Herein,we introduce a Co-free LLO,Li_(1.167)Ni_(0.222)Mn_(0.611)O_(2)(Cf-L1),which features a cooperative structure of Li/Ni mixing and stacking faults.This structure regulates the crystal and electronic structures,resulting in a higher discharge capacity of 300.6 mA h g^(-1)and enhanced rate capability compared to the typical Co-free LLO,Li_(1.2)Ni_(0.2)Mn_(0.6)O_(2)(Cf-Ls).Density functional theory(DFT)indicates that Li/Ni mixing in LLOs leads to increased Li-O-Li configurations and higher anionic redox activities,while stacking faults further optimize the electronic interactions of transition metal(TM)3d and non-bonding O 2p orbitals.Moreover,stacking faults accommodate lattice strain,improving electrochemical reversibility during charge/discharge cycles,as demonstrated by the in situ XRD of Cf-L1 showing less lattice evolution than Cf-Ls.This study offers a structured approach to developing Co-free LLOs with enhanced capacity,voltage,rate capability,and cyclability,significantly impacting the advancement of the next-generation Li-ion batteries.

Etomidate protects retinal ganglion cells from hydrogen peroxide-induced injury via Nrf2/HO-1 pathway

AIM:To determine whether etomidate(ET)has a protective effect on retinal ganglion cells(RGCs)injured with hydrogen peroxide(H_(2)O_(2))and to explore the potential mechanism underlying the antioxidative stress effect of ET.METHODS:Cultured RGCs were identified by double immunofluorescent labeling of microtubule-associated protein 2 and Thy1.1.An injury model of H_(2)O_(2)-induced RGCs oxidative stress was established in vitro.Cells were pretreated with different concentrations of ET(1,5,and 10μmol/L)for 4h,followed by further exposure to H_(2)O_(2)at 1000μmol/L.Cell counting kit 8 and Annexin V/propidium iodide assays were applied to detect the viabilities and apoptosis rates of the RGCs at 12,24,and 48h after H_(2)O_(2)stimulation.The levels of nitric oxide,malondialdehyde,and glutathione in culture media were measured at these time points.Quantitative reverse transcription polymerase chain reaction(qRT-PCR)and Western blot were performed to observe the effects of ET on the messenger RNA and protein expression of inducible nitric oxide synthase(iNOS),nuclear factor erythroid 2-related factor 2(Nrf2),heme oxygenase 1(HO-1),glutathione peroxidase 1 and the level of conjugated acrolein in RGCs at 12,24,and 48h after H_(2)O_(2)stimulation and in the retina at 12h after optic nerve transection(ONT).RESULTS:The applications of 5 and 10μmol/L of ET significantly increased the viability of RGCs.Results from qRT-PCR indicated a decrease in the expression of iNOS and an increase in the expressions of Nrf2 and HO-1 in ETpretreated RGCs at 12,24 and 48h after H_(2)O_(2)stimulation,as well as in ET-treated retinas at 12h after ONT.Western blot analysis revealed a decrease in the expression of iNOS and levels of conjugated acrolein,along with an increase in the expressions of Nrf2 and HO-1 in ET-pretreated RGCs in vitro and ET-treated retinas in vivo.CONCLUSION:ET is a neuroprotective agent in primary cultured RGCs injured by H_(2)O_(2).The effect of ET is dosedependent with the greatest effect being at 10μmol/L.ET plays an antioxidant role by inhibiting iNOS,up-regulating Nrf2/HO-1,decreasing the production of acrolein,and increasing the scavenge of acrolein.

Climate warming is significantly influenced by rising summer maximum temperatures:insights from tree-ring evidence of the Western Tianshan Mountains,China

As one of the regions most affected by global climate warming,the Tianshan mountains has experienced several ecological crises,including retreating glaciers and water deficits.Climate warming in these mountains is considered mainly to be caused by increases in minimum temperatures and winter temperatures,while the influence of maximum temperatures is unclear.In this study,a 300-year tree-ring chronology developed from the Western Tianshan Mountains was used to reconstruct the summer(June-August)maximum temperature(Tmax6-8) variations from 1718 to2017.The reconstruction explained 53.1% of the variance in the observed Tmax6-8.Over the past 300 years,the Tmax6-8reconstruction showed clear interannual and decadal variabilities.There was a significant warming trend(0.18 ℃/decade) after the 1950s,which was close to the increasing rates of the minimum and mean temperatures.The increase in maximum temperature was also present over the whole Tianshan mountains and its impact on climate warming has increased.The Tmax6-8variations in the Western Tianshan mountains were influenced by frequent volcanic eruptions combined with the influence of solar activity and the summer North Atlantic Oscillation.This study reveals that climate warming is significantly influenced by the increase in maximum temperatures and clarifies possible driving mechanisms of temperature variations in the Western Tianshan mountains which should aid climate predictions.

Climate warming is significantly influenced by rising summer maximum temperatures: insights from tree-ring evidence of the Western Tianshan Mountains, China

As one of the regions most affected by global cli-mate warming,the Tianshan mountains has experienced sev-eral ecological crises,including retreating glaciers and water deficits.Climate warming in these mountains is considered mainly to be caused by increases in minimum temperatures and winter temperatures,while the influence of maximum temperatures is unclear.In this study,a 300-year tree-ring chronology developed from the Western Tianshan Moun-tains was used to reconstruct the summer(June-August)maximum temperature(T_(max6-8))variations from 1718 to 2017.The reconstruction explained 53.1% of the variance in the observed T_(max6-8).Over the past 300 years,the T_(max6-8)reconstruction showed clear interannual and decadal vari-abilities.There was a significant warming trend(0.18°C/decade)after the 1950s,which was close to the increasing rates of the minimum and mean temperatures.The increase in maximum temperature was also present over the whole Tianshan mountains and its impact on climate warming has increased.The T_(max6-8) variations in the Western Tianshan mountains were influenced by frequent volcanic eruptions combined with the influence of solar activity and the sum-mer North Atlantic Oscillation.This study reveals that cli-mate warming is significantly influenced by the increase in maximum temperatures and clarifies possible driving mech-anisms of temperature variations in the Western Tianshan mountains which should aid climate predictions.

Study on a High Precision Inter-stage Flow Field Test System for Axial Compressors

The accurate parameters measurement of the flow field between the stages for axial compressors is a significant demand.This paper proposes an axial compressor inter-stage flow field high-precision test system,which mainly consists of a probe motion scanning mechanism,fully automated test control software,and data processing methods.Iterative correction is applied to the original readings obtained from the scanning tests to enhance testing accuracy.Using this test system,detailed tests are conducted on a 1.5-stage subsonic axial compressor under different operating conditions.The test results effectively captured the impact of surface roughness and tip clearance variations on compressor performance.The distribution characteristics of parameters measured in inter-stage sections can characterize the effects of blade wake area and changes in aerodynamic performance at different blade heights.The developed test system can be extended to multi-stage compressors.

Postnatal development of rat retina:a continuous observation and comparison between the organotypic retinal explant model and in vivo development

The organotypic retinal explant culture has been established for more than a decade and offers a range of unique advantages compared with in vivo experiments and cell cultures.However,the lack of systematic and continuous comparison between in vivo retinal development and the organotypic retinal explant culture makes this model controversial in postnatal retinal development studies.Thus,we aimed to verify the feasibility of using this model for postnatal retinal development studies by comparing it with the in vivo retina.In this study,we showed that postnatal retinal explants undergo normal development,and exhibit a consistent structure and timeline with retinas in vivo.Initially,we used SOX2 and PAX6 immunostaining to identify retinal progenitor cells.We then examined cell proliferation and migration by immunostaining with Ki-67 and doublecortin,respectively.Ki-67-and doublecortin-positive cells decreased in both in vivo and explants during postnatal retinogenesis,and exhibited a high degree of similarity in abundance and distribution between groups.Additionally,we used Ceh-10 homeodomain-containing homolog,glutamate-ammonia ligase(glutamine synthetase),neuronal nuclei,and ionized calcium-binding adapter molecule 1 immunostaining to examine the emergence of bipolar cells,Müller glia,mature neurons,and microglia,respectively.The timing and spatial patterns of the emergence of these cell types were remarkably consistent between in vivo and explant retinas.Our study showed that the organotypic retinal explant culture model had a high degree of consistency with the progression of in vivo early postnatal retina development.The findings confirm the accuracy and credibility of this model and support its use for long-term,systematic,and continuous observation.

Unleashing the Potential of Electroactive Hybrid Biomaterials and Self‑Powered Systems for Bone Therapeutics

The incidence of large bone defects caused by traumatic injury is increasing worldwide,and the tissue regeneration process requires a long recovery time due to limited self-healing capability.Endogenous bioelectrical phenomena have been well recognized as critical biophysical factors in bone remodeling and regeneration.Inspired by bioelectricity,electrical stimulation has been widely considered an external intervention to induce the osteogenic lineage of cells and enhance the synthesis of the extracellular matrix,thereby accelerating bone regeneration.With ongoing advances in biomaterials and energy-harvesting techniques,electroactive biomaterials and self-powered systems have been considered biomimetic approaches to ensure functional recovery by recapitulating the natural electrophysiological microenvironment of healthy bone tissue.In this review,we first introduce the role of bioelectricity and the endogenous electric field in bone tissue and summarize different techniques to electrically stimulate cells and tissue.Next,we highlight the latest progress in exploring electroactive hybrid biomaterials as well as self-powered systems such as triboelectric and piezoelectric-based nanogenerators and photovoltaic cell-based devices and their implementation in bone tissue engineering.Finally,we emphasize the significance of simulating the target tissue’s electrophysiological microenvironment and propose the opportunities and challenges faced by electroactive hybrid biomaterials and self-powered bioelectronics for bone repair strategies.

Imperative for long-term management and surveillance in Kawasaki disease

Kawasaki disease(KD)is a significant pediatric vasculitis known for its potential to cause severe coronary artery complications.Despite the effectiveness of initial treatments,such as intravenous immunoglobulin,KD patients can experience long-term cardiovascular issues,as evidenced by a recent case report of an adult who suffered a ST-segment elevation myocardial infarction due to previous KD in the World Journal of Clinical Cases.This editorial emphasizes the critical need for long-term management and regular surveillance to prevent such complications.By drawing on recent research and case studies,we advocate for a structured approach to follow-up care that includes routine cardiac evaluations and preventive measures.

A Machine Learning-Based Observational Constraint Correction Method for Seasonal Precipitation Prediction

Seasonal precipitation has always been a key focus of climate prediction.As a dynamic-statistical combined method,the existing observational constraint correction establishes a regression relationship between the numerical model outputs and historical observations,which can partly predict seasonal precipitation.However,solving a nonlinear problem through linear regression is significantly biased.This study implements a nonlinear optimization of an existing observational constrained correction model using a Light Gradient Boosting Machine(LightGBM)machine learning algorithm based on output from the Beijing National Climate Center Climate System Model(BCC-CSM)and station observations to improve the prediction of summer precipitation in China.The model was trained using a rolling approach,and LightGBM outperformed Linear Regression(LR),Extreme Gradient Boosting(XGBoost),and Categorical Boosting(CatBoost).Using parameter tuning to optimize the machine learning model and predict future summer precipitation using eight different predictors in BCC-CSM,the mean Anomaly Correlation Coefficient(ACC)score in the 2019–22 summer precipitation predictions was 0.17,and the mean Prediction Score(PS)reached 74.The PS score was improved by 7.87%and 6.63%compared with the BCC-CSM and the linear observational constraint approach,respectively.The observational constraint correction prediction strategy with LightGBM significantly and stably improved the prediction of summer precipitation in China compared to the previous linear observational constraint solution,providing a reference for flood control and drought relief during the flood season(summer)in China.

Preoperative serum total bilirubin-albumin ratio as a prognostic indicator in patients with hepatitis-related cirrhosis after splenectomy

BACKGROUND Splenectomy is an effective yet invasive intervention for alleviating portal pressure in patients with hepatitis cirrhosis.However,the current prognostic indicators for predicting long-term overall survival of these patients have several limitations.AIM To assess the potential of preoperative total bilirubin-albumin(B/A)ratio as a prognostic indicator for patients with hepatitis cirrhosis undergoing splenectomy.METHODS A total of 257 patients diagnosed with hepatitis cirrhosis were retrospectively enrolled in the study.Normality test,t-test,Wilcoxon test,χ2 test,or Fisher’s exact test was employed to analyze the intraoperative and postoperative conditions of the patients.Receiver operating characteristic(ROC)curve analysis was utilized to depict the 10-year overall survival rate.RESULTS During the follow-up period,85.99%of the patients survived,with a median survival time of 64.6 months.Multivariate analysis revealed that total serum B/A ratio was an independent risk factor for overall survival(P=0.037).ROC curve analysis demonstrated that a B/A ratio of 0.87 was the optimal cut-off value.Consequently,the patients were categorized into two groups:High B/A group(n=64)and low B/A group(n=193).The median follow-up time for the high B/A group and low B/A group was 56.8 months and 67.2 months,respectively(P=0.045).Notably,the high B/A group exhibited a significantly lower 10-year overall survival compared to the low B/A group(P<0.001).Patients with hepatocellular carcinoma(HCC)had lower overall survival rates.Patients with a high B/A ratio exhibited a lower overall survival than those with a low B/A rate in the overall cohort and the subgroups of patients with HCC or not,early Child-Pugh grade,low albumin-bilirubin grade,and model for end-stage liver disease score≥10(log-rank test,P<0.001 for all).CONCLUSION The B/A ratio can serve as an effective prognostic indicator for overall survival in patients with hepatitis B virusrelated cirrhosis following splenectomy,and a higher B/A ratio may suggest a poorer prognosis.