Small-size temperature/high-pressure integrated sensor via flip-chip method

Hydraulic technology with smaller sizes and higher reliability trends,including fault prediction and intelligent control,requires high-performance temperature and pressure-integrated sensors.Current designs rely on planar wafer-or chip-level integration,which is limited by pressure range,chip size,and low reliability.We propose a small-size temperature/high-pressure integrated sensor via the flip-chip technique.The pressure and temperature units are arranged vertically,and the sensing signals of the two units are integrated into one plane through silicon vias and gold–gold bonding,reducing the lateral size and improving the efficiency of signal transmission.The flip-chip technique ensures a reliable electrical connection.A square diaphragm with rounded corners is designed and optimised with simulation to sense high pressure based on the piezoresistive effect.The temperature sensing unit with a thin-film platinum resistor measures temperature and provides back-end high-precision compensation,which will improve the precision of the pressure unit.The integrated chip is fabricated by MEMS technology and packaged to fabricate the extremely small integrated sensor.The integrated sensor is characterised,and the pressure sensor exhibits a sensitivity and sensitivity drift of 7.97mV/MPa and−0.19%FS in the range of 0–20 MPa and−40 to 120℃.The linearity,hysteresis,repeatability,accuracy,basic error,and zero-time drift are 0.16%FS,0.04%FS,0.06%FS,0.18%FS,±0.23%FS and 0.04%FS,respectively.The measurement error of the temperature sensor and temperature coefficient of resistance is less than±1°C and 3142.997 ppm/℃,respectively.The integrated sensor has broad applicability in fault diagnosis and safety monitoring of high-end equipment such as automobile detection,industrial equipment,and oil drilling platforms.