Seasonal Prevalence of <i>Aedes aegypti</i>in Semi-Urban Area of Yangon Region, Myanmar

Prevalence rate of Aedes aegypti was conducted in 20 houses from semi-urban areas of Yangon Region. Larval surveys were done at indoors and outdoors water containers of five types. Prevalence rate of larval density larvae was investigated monthly by standard indices. The highest infestation rate of the container index (CI) was in June 2018 (56.52%), the second highest was in July 2017 (48.36%) and the lowest rate was in April 2017 (5.07%);those of the Jar index (JI) was highest (36.49%) in June and second highest rate (23.8%) was in October 2017. Reasoning the Metal drum (MI) was highest (13.95%) in June 2018 and second highest (6.25%) was in July 2017. The larval infestation rate of Earthen pot (EI) was highest (42.1%) in July 2017. The larval incident rate in almost all indices showed that the highest rate was at the beginning of monsoon season, in June and July, while in the remaining months, the larval incident rate was found to decrease due to the application of insecticides in the study area by the Township Public Health Department. However, the application of insecticides did not cover all the breeding sites of the mosquitoes, the water puddles under their houses were left to apply the insecticides. The positive larval incident rate was assessed by Household (HI), Container index (CI), Breteau index (BI). The highest and second highest positive larval incident rates were all in June 2018 and July 2017 in all indices, HI (27.3% and 23.4%), CI (56.52% and 48.36%), BI (17.56% and 16.79%) and SI (28.49% and 24.38%) respectively. The lowest rate in all indices was 2.56% (HI), 5.07% (IC), 2.67% (BI) and 1.91% (SI) in April. In this study, the fluctuation of indices of infestation rates and positive larval index value was positively correlated in similar trends in the study months. The reason for difficult control measure depends on the water sources under their houses and remains stagnant throughout the year, even in the dry season. High incident and death rates of the children due to Dengue/Dengue Haemorrhagic fever patients in June and July could not be directly correlated with the prevalence of Aedes aegypti. The control measure is needed to wash out the water source under the houses and to apply the insecticides to the all breeding sites.

Study on Epithermal Gold Mineralization System at Shwebontha Prospect,Monywa Copper-Gold Ore Field,Central Myanmar

The Shwebontha prospect area is situated in the Central Volcanic Belt,central Myanmar,where the well-known Sagaing Fault serves as its eastern boundary.This study aims to document key the mineralogy,host rock geochemistry and ore mineralizing fluids.The mineralization,hosted by Upper Oligocene to Middle Miocene rhyolites,displays a strong lithological control.Mineralization is characterized by gold-bearing silicified massive ore and chalcedonic quartz veins in which sulfides are clustered and disseminated not only in quartz gangue but also in rhyolite host rocks.The significant ore minerals in the mineralized veins include pyrite,sphalerite,galena,chalcopyrite,and gold.Common hydrothermal alterations such as silicic,argillic and propylitic alteration types are recognized.According to the fluid inclusion data and interpretation,ore mineralizing fluids in the research area are characterized by formation temperatures of 260-280℃ and salinity of 0.35-2.41%wt.NaCl eq.respectively.Mixing of hydrothermal fluids was generally considered to be an effective mechanism for ore transport and deposition.

Evaluation of Stope Stability in Underground Mine;Hermyingyi (Sn-W Deposit) Mine in Myanmar

The stability of underground excavations has become an important issue in order to extend underground mining operations and extract deeper deposits. The increasing demand for Tin-Tungsten (Sn-W) for industry and its market price has created a motivation for mining companies to extract deep-seated Sn-W ore deposits in Myanmar. Thus, this paper aims to investigate the stability of underground openings, especially, the stope with considering the mining methods. To meet the objective, FLAC3D 5.0 simulation was used for the assessment of stope under different stress ratios, 0.5, 1.0, and 1.5 for two types of underground mines;Open stoping and Cut and Fill stoping. The results show that the risk of instability of stope is high under the stress ratio of K = 0.5 than that of K = 1.0 and K = 1.5 in both mining methods. However, the stability of the stope in open stope method is lower than that of cut-and-fill method obviously. This result shows that the appropriate mining method has to be selected for extraction of Sn-W deposit carefully in terms of the balance of safety and cost.

Radio Network Planning and Optimization for 5G Telecommunication System Based on Physical Constraints

The paper mainly focuses on the network planning and optimization problem in the 5G telecommunication system based on the numerical investigation.There have been two portions of this work,such as network planning for efficient network models and optimization of power allocation in the 5G network.The radio network planning process has been completed based on a specific area.The data rate requirement can be solved by allowing the densification of the system by deploying small cells.The radio network planning scheme is the indispensable platform in arranging a wireless network that encounters convinced coverage method,capacity,and Quality of Service necessities.In this study,the eighty micro base stations and two-hundred mobile stations are deployed in the-15km×15km wide selected area in the Yangon downtown area.The optimization processes were also analyzed based on the source and destination nodes in the 5G network.The base stations’location is minimized and optimized in a selected geographical area with the linear programming technique and analyzed in this study.

Computerized FDTD Method for Longitudinal Optical Phonon Energy on Semiconductor Hybrid Structure for High Power Devices Fabrication

The research problem in this study is the longitudinal optical phonon energy on metal/semiconductor interface for high performance semiconductor device.The research solution is to make the software model with finite difference time domain(FDTD)solution for transmission and reflection pulse between metal and semiconductor interface for carrier dynamics effects.The objective of this study is to find the quantum mechanics understanding on interface engineering for fabricating the high performance device for future semiconductor technology development.The analysis was carried out with the help of MATLAB.The quantum mechanical spatial field on metal-semiconductor stripe structure has been analyzed by FDTD techniques.This emission reveals a characteristic polar radiation distribution of electric dipoles and a wavelength independent of the structure size or the direction of emission;consequently,it is attributed to thermally generate electric dipoles resonating with the longitudinal optical phonon energy.Phonon energy occurs lattice vibration of material by the polarization of light,if the material has rigid structure reflect back the incident light.So,high reflective metal-semiconductor structure always use as photodectors devices in optical fiber communication.No lattice vibration material structure has no phonon effect,so this structure based devices can get high performance any other structure based devices.The transmission and reflection coefficient of metal-semiconductor GaN/Au layer structure compare with GaN/Ti and GaN/Pt structure.Parallel(P)and transverse(S)polarization of light incident on a metal-semiconductor nanolayer structure with IR wavelength.Efficient use of the layer by layer(LbL)method to fabricate nanofilms requires meeting certain conditions and limitations that were revealed in the course of research on model systems.

Research on Self-balancing Two Wheels Mobile Robot Control System Analysis

The paper presents the research on self-balancing two-wheels mobile robot control system analysis with experimental studies.The research problem in this work is to stabilize the mobile robot with self-control and to carry the sensitive things without failing in a long span period.The main objective of this study is to focus on the mathematical modelling of mobile robot from laboratory scale to real world applications.The numerical expression with mathematical modelling is very important to control the mobile robot system with linearization.The fundamental concepts of dynamic system stability were utilized for maintaining the stability of the constructed mobile robot system.The controller design is also important for checking the stability and the appropriate controller design is proportional,integral,and derivative-PID controller and Linear Quadratic Regulator(LQR).The steady state error could be reduced by using such kind of PID controller.The simulation of numerical expression on mathematical modeling was conducted in MATLAB environments.The confirmation results from the simulation techniques were applied to construct the hardware design of mobile robot system for practical study.The results from simulation approaches and experimental approaches are matched in various kinds of analyses.The constructed mobile robot system was designed and analyzed in the control system design laboratory of Yangon Technological University(YTU).

A Comparative Study on Korean and Myanmar Personal Pronouns

The purpose of this paper is to examine the similarities and differences between pronouns in Korean and Myanmar. In other words, we try to help Korean and Myanmar learners to study personal pronouns by comparing the personal pronouns between the two languages. Personal pronouns are used in Myanmar as “pronouns referring to people” as in Korean. The two languages are divided into first person, second person, and third person pronoun. However, looking at functions and usage, there seem to be many differences between the two languages. For example, in the case of Myanmar language, personal pronouns are different according to gender and personal pronouns are used differently for general people and monks. Myanmar also uses the personal pronouns differently depending on colloquial and written language. In the case of Korean language, there is no big difference between the sexes in different languages but there is difference between the people and monks in terms of Myanmar language. However, Korean people have difficulties in learning personal pronouns because their usage differs according to their status and social status. Therefore, in order to solve this problem, it is meaningful to identify commonalities and differences between languages by comparing characteristics and use of personal pronouns between the two languages.

A New <i>Stegolophodon</i>(Proboscidea, Mammalia) from the Irrawaddy Formation of Myanmar

The new fossil teeth of Stegolophodon (Proboscidea, Mammalia) were discovered from the terrestrial sediments of the Irrawaddy Formation, in Kyauksaungsan and Tebingan areas, Magway Region, central Myanmar. A new Stegolophodon species is established in this paper. Stegolophodon iravaticus shares the characters of the advanced Stegolophodon and the primitive Stegodon. The M3 of S. iravaticus is related to that of the molar of Sand Pit in Tha Chang, Thailand and that of from Dhedari, Pakistan which is included in the Stegolophodon group 6 of Saegusa et al. (2005).

An Early Stopping-Based Artificial Neural Network Model for Atmospheric Corrosion Prediction of Carbon Steel

The optimization of network topologies to retain the generalization ability by deciding when to stop overtraining an artificial neural network(ANN)is an existing vital challenge in ANN prediction works.The larger the dataset the ANN is trained with,the better generalization the prediction can give.In this paper,a large dataset of atmospheric corrosion data of carbon steel compiled from several resources is used to train and test a multilayer backpropagation ANN model as well as two conventional corrosion prediction models(linear and Klinesmith models).Unlike previous related works,a grid search-based hyperparameter tuning is performed to develop multiple hyperparameter combinations(network topologies)to train multiple ANNs with mini-batch stochastic gradient descent optimization algorithm to facilitate the training of a large dataset.After that,one selection strategy for the optimal hyperparameter combination is applied by an early stopping method to guarantee the generalization ability of the optimal network model.The correlation coefficients(R)of the ANN model can explain about 80%(more than 75%)of the variance of atmospheric corrosion of carbon steel,and the root mean square errors(RMSE)of three models show that the ANN model gives a better performance than the other two models with acceptable generalization.The influence of input parameters on the output is highlighted by using the fuzzy curve analysis method.The result reveals that TOW,Cl-and SO2 are the most important atmospheric chemical variables,which have a well-known nonlinear relationship with atmospheric corrosion.

Estimation of Seismic Ground Motion Induced by the 23 January, 2005 Earthquake in Palu Region, Central Sulawesi, Indonesia

On January 23rd 2005, a strong earthquake with moment magnitude （Mw 6.3） hit the Palu City （Central Sulawesi area）. The earthquake involved an area more than 800 km along the Palu Koro fault zone. In order to characterize the seismic ground motion of alluvium layers existing in the Palu City, eight sites of mierotremor array measurements were performed. The shear wave velocity of the top layer is ≤ 300 m/s. Palu City had deposited on a thick alluvial layer in the coastal area. The subsurface geology also changes slowly from soft sedimentary layers in the coastal area to igneous intrusion and metamorphic rock in the mountains. Seismic strong ground motion was predicted based on the statistical Green＇s function method. Considering the damage produced by the 2005 Palu earthquake （Mw 6.3）, we also estimated peak ground acceleration distribution at Palu City, with values ranging from 100 gal up to 500 gal on the PGA （peak ground acceleration） scale. Peak ground velocity becomes more than 0.3 m/s in some areas, which may likely lead to severe damage to buildings.

First Record of Brachiopod Species in Myanmar

The Paleozoic rocks are well exposed in the Taungnyo area and the main purpose of classification is taxonomic status of the invertebrate fossils and describing the systematic paleontology of brachiopod fossils from Taungnyo Formation. Mainly distributed clastic sedimentary rocks of Taungnyo Formation (Early Carboniferous) and carbonate rocks of Moulmein Limestone Group (Permian to Middle Triassic) are well exposed in the Taungnyo area. In this study, mainly, a total of five species are recognized in the clastic sediments of Taungnyo Formation. Most brachiopods are generally found abundant and well preserved in the mudstone unit. Among them, most of the taxa have not been recorded previously. The brachiopods include: Fimbrispirifer venustus, Ovetensispirifer ovetensium, Aullacella sp., Kayserellae emanuelensis, and Chonopectus sp. All of the species are first recorded in Myanmar.

A Novel Hybrid Encryption Method Based on Honey Encryption and Advanced DNA Encoding Scheme in Key Generation

Nowadays, increased information capacity and transmission processes make information security a difficult problem. As a result, most researchers employ encryption and decryption algorithms to enhance information security domains. As it progresses, new encryption methods are being used for information security. In this paper, a hybrid encryption algorithm that combines the honey encryption algorithm and an advanced DNA encoding scheme in key generation is presented. Deoxyribonucleic Acid (DNA) achieves maximal protection and powerful security with high capacity and low modification rate, it is currently being investigated as a potential carrier for information security. Honey Encryption (HE) is an important encryption method for security systems and can strongly prevent brute force attacks. However, the traditional honeyword encryption has a message space limitation problem in the message distribution process. Therefore, we use an improved honey encryption algorithm in our proposed system. By combining the benefits of the DNA-based encoding algorithm with the improved Honey encryption algorithm, a new hybrid method is created in the proposed system. In this paper, five different lookup tables are created in the DNA encoding scheme in key generation. The improved Honey encryption algorithm based on the DNA encoding scheme in key generation is discussed in detail. The passwords are generated as the keys by using the DNA methods based on five different lookup tables, and the disease names are the input messages that are encoded by using the honey encryption process. This hybrid method can reduce the storage overhead problem in the DNA method by applying the five different lookup tables and can reduce time complexity in the existing honey encryption process.

Comparison of Experimental and Theoretical Output Power of Grid Connected Photovoltaic System in Super Mega Factory

In this paper, the performance of grid connected PV system that is installed in Super Mega Factory is presented. The output parameters of 4 kW PV is collected and analyzed. Then, according to the results the weak points of the system were found and the theoretical output power was compared. After that we try to get the maximum output power making the correction of collector angle and place suitable panel position.

Distribution Pattern and Seasonal Variation of Bird Species from Semi-Urban Area of Taungoo Environs

The environs of Taungoo Township, Bago Region are one of the high biodiversity areas in Myanmar, locating eastern side of the high mountain ranges of Middle Yoma. The dense of every green and deciduous forest in the middle Middle Yoma were logging since 10 - 20 years ago. The birds inhabiting in that area have to refuge in suitable habitats nearby. The resent status of bird species is needed to assess the diversity of birds with the respect to distribution and seasonal variation after the construction of Yangon-Nepyitaw, Myanmar after twenty years ago. A total of 50 species of 27 genera, 22 families under nine orders were recorded. That represented 44 resident species (32 terrestrial species and 12 water bird species), and 6 species of migratory birds (1 terrestrial species and 5 water bird species). As habitat utilization, 24 bird species in paddy fields, 21 species in scattered trees, 33 species in wetland and 25 species in forest habitat types were investigated. Some species used more than one habitat types. According to the assessment of abundance categories based on the calculation of individual numbers of the birds, abundant category (3 species), common bird (1 species), frequent category (5 species), uncommon category (3 species) and rare species (28 species) were categorized. Hence, bird community was still sustainable in this area. In the aspect of conservation status, all recorded bird species were under least concern categories, according to the IUCN Redlist in the study area.

Physicomechanical Properties of Rice Husk Pellets for Domestic Combustion in Myanmar

Myanmar produces 26.21 million tons of rice annually that results in 5.24 million tons of remaining rice husk of which only around 30%is used for electricity and heat production in the country.Myanmar needs more energy consumption to develop the agricultural economy and biomass energy in the future of the country.The proximate and ultimate analysis of rice husk and produced rice husk pellets were determined as well as analyzing the physicochemical and mechanical properties.The rice husk pellets without doing size reduction were manufactured in a ring die pellet mill.Loose and pellet-formed rice husk were compared based on the ISO 17225-6 standard for the characterization of herbaceous biomass.Pelletizing increased the bulk density of rice husk by a factor of 4.5.The net calorific value of Myanmar rice husk pellets was 3.67 kW h/kg with a moisture content of 7.48%and the large amount of ash forming constituents.The result showed that the diameter,length,and durability of the produced pellets complied with ISO 17225-6 standard.However,the net calorific value and bulk density could only be partially fulfilled according to the ISO standard depending on the process parameters.

Implementation of Distributed Control System for Rice Mill Using C#

The paper presents the distributed control system for rice mill using C#language.The real-time manufacturing system can be implemented by utilizing the signal from the real time control units that is more operative than other old-fashioned control systems in the extent of modern industrial days.The software-based Distributed Control System(DCS)is novel fashionable than any other conventional control systems in the state-ofthe-art manufacturing developments.This research study emphasizes on the implementation of the DCS-based rice mill using visual C#.net.The Industrial Ethernet(IE)is realized between the top level controller for the operator and the controlled station for the remote devices.The model of client-server approach is more appropriate for the automation and manufacturing research purposes.In this study,the computer graphical simulation of the complete control development is depicted in real-time status quo by visual C#language under Visual Studio 2008 software.The parallel ports in the computers of remote terminal level and the master terminal level controllers have been interconnected with port interface coding by visual C#program.

Measurement Analysis of Specific Absorption Rate in Human Body Exposed to a Base Station Antenna by Using Finite Difference Time Domain Techniques

The system analysis of specific absorption rate(SAR)in human body ex­posed to a base station antenna by using finite difference time domain tech­niques was presented in this research works.The objectives of this work are to evaluate the knowledge and awareness about SAR among human body and mobile base station.The paper investigates the electromagnetic wave absorption inside a human body.The human body has been identified us­ing dataset based on 2D object considering different electrical parameters.The SAR convinced inside the human body model exposed to a radiating base station antenna(BSA)has been considered for multiple numbers of carrier frequencies and input power of 20 W/carrier at GSM 900 band.The distance(R)of human body from BSA is varied in the range of 0.1 m to 5.0 m.For the number of carrier frequency equal to one and R=0.1 m,the concentrated value of whole-body average SAR obtained by FDTD technique is found to be 0.68 W/kg which decreases either with increase of R or decrease of number of carrier frequencies.Safety distance for general public is found to be 1.5 m for number of carrier frequencies equal to one.The performance accuracy of this analysis meets the high level condition by comparing with the relevant system development in recent time.

Size-fractionated carbonaceous particles and climate effects in the eastern region of Myanmar

This study reports on an investigation of fine and coarse carbonaceous particulate matters(PM)in Tachileik,eastern Myanmar,during the dry and wet seasons of 2022.The carbon compositions,including organic carbon(OC)and elemental carbon(EC),in each size(PM10-2.5,PM2.5-1.0,and PM1.0-0.5)were determined by a carbon analyzer.The average total mass concentration of the three fractions of particle samples during the dry season was higher(51.23±23.86μg/m3)than that of the wet season(14.00±5.26μg/m3).The results indicate that OC and EC levels were highest for PM1.0-0.5 during the dry season and the sizes were similar for both seasons.The OC/EC ratios varied in different seasons,from 1.93 to 4.40 and 4.13 to 5.25 in the dry and wet seasons,respectively.EC was sub-divided into char-EC and soot-EC;the char-EC/soot-EC in the dry season was higher than in the wet season,signifying that biomass burning is the main particle source during the dry season.However,vehicle emissions dominated during the wet season.The effective carbon ratio(ECR)suggested that finer particles contributed more to global warming.This information is important in terms of air quality control and mitigation in Myanmar and elsewhere.

Urbanization,economic development,and environmental changes in transitional economies in the global south:a case of Yangon

Background:Transitional economies in Southeast Asia—a distinct group of developing countries—have experienced rapid urbanization in the past several decades due to the economic transition that fundamentally changed the function of their economies,societies and the environment.Myanmar,one of the least developed transitional economies in Southeast Asia,increased urbanization substantially from 25%in 1990 to 31%in 2019.However,major knowledge gaps exist in understanding the changes in urban land use and land cover and environment and their drivers in its cities.Methods:We studied Yangon,the largest city in Myanmar,for the urbanization,environmental changes,and the underlying driving forces in a radically transitioned economy in the developing world.Based on satellite imagery and historic land use maps,we quantified the expansion of urban built-up land and constructed the land conversion matrix from 1990 through 2020.We also used three air pollutants to illustrate the changes in environmental conditions.We analyzed the coupled dynamics among urbanization,economic development,and environmental changes.Through conducting a workshop with 20 local experts,we further analyzed the influence of human systems and natural systems on Yangon’s urbanization and sustainability.Results:The city of Yangon expanded urban built-up land rapidly from 1990 to 2000,slowed down from 2000 to 2010,but gained momentum again from 2010 to 2020,with most newly added urban built-up land appearing to be converted from farmland and green land in both 1990–2000 and 2010–2020.Furthermore,the air pollutant concen-tration of CO decreased,but that of NO_(2)and PM_(2.5)increased in recent years.A positive correlation exists between population and economic development and the concentration of PM_(2.5)is highly associated with population,the economy,and the number of vehicles.Finally,the expert panel also identified other potential drivers for urbanization,including the extreme climate event of Cyclone Nargis,capital relocation,and globalization.Conclusions:Our research highlights the dramatic expansion of urban land and degradation of urban environment measured by air pollutants and interdependent changes between urbanization,economic development,and environmental changes.

A hatching aphidlion-like lacewing larva in 100 million years old Kachin amber

Dear Editor,Hatching is a crucial moment in the life of an animal.The animal stops being an embryo protected by the egg and becomes a post-embryonic immature(see Haug,2020 for difficulties in naming these stages).This must have been the case in the past as well,but the fossil record is rather sparse in the preservation of this very moment.The fossil preservation of such a case needs to facilitate not only preservation of the animal,but also of the egg.As these are often of rather different material,making the preservation of both together in many cases unlikely.Yet,there are preservation types that seem to favor such incidents.Amber has become famous for preserving cases of“frozen behaviour",preserving a specific moment in the life of an animal in an almost life-like manner(Arillo,2007),including:copulations,parasite-host interactions,aggregations,group defense,brood care,egg-laying(although likely stress-induced).