Lattice Boltzmann method formulation for simulation of thermal radiation effects on non-Newtonian Al_(2)O_(3) free convection in entropy determination

The simultaneous investigation on the parameters affecting the flow of electrically conductive fluids such as volumetric radiation,heat absorption,heat generation,and magnetic field(MF)is very vital due to its existence in various sectors of industry and engineering.The present research focuses on mathematical modeling to simulate the cooling of a hot component through power-law(PL)nanofluid convection flow.The temperature reduction of the hot component inside a two-dimensional(2D)inclined chamber with two different cold wall shapes is evaluated.The formulation of the problem is derived with the lattice Boltzmann method(LBM)by code writing via the FORTRAN language.The variables such as the radiation parameter(0–1),the Hartmann number(0–75),the heat absorption/generation coefficient(−5–5),the fluid behavioral index(0.8–1.2),the Rayleigh number(103–105),the imposed MF angle(0°–90°),the chamber inclination angle(−90°–90°),and the cavity cold wall shape(smooth and curved)are investigated.The findings indicate that the presence of radiation increases the mean Nusselt number value for the shear-thickening,Newtonian,and shear thinning fluids by about 6.2%,4%,and 2%,respectively.In most cases,the presence of nanoparticles improves the heat transfer(HT)rate,especially in the cases where thermal conduction dominates convection.There is the lowest cooling performance index and MF effect for the cavity placed at an angle of 90°.The application in the design of electronic coolers and solar collectors is one of the practical cases of this numerical research.

Respiratory complications of propofol,sevoflurane,and dexmedetomidine anesthesia for fiberoptic bronchoscopy in children aged 1 month to 3 years:a randomized trial

Objective To evaluate the effect of propofol,sevoflurane,and dexmedetomidine on respiratory complications inchildren undergoing fiberoptic bronchoscopy(FOB).Methods This double-blind randomized clinical trial was conductedamong 120 children aged 1 month to 3 years undergoing FOB.The patients were randomized into 3 groups(n=40)foranesthesia induction with sevoflurane inhalation,1 mg/kg propofol,or 1μg/kg dexmedetomidine before bronchoscopy,andthe changes in hemodynamic parameters,sedation level,and respiratory complications during and after the procedure wereassessed.Results The patients'heart rate during bronchoscopy was significantly lower and the mean arterial blood pressuresignificantly higher in dexmedetomidine group than in sevoflurane and propofol groups(P<0.05).Cough duringbronchoscopy did not occur in any of the cases in propofol group,while the highest frequency of cough was recorded indexmedetomidine group.The incidence of laryngospasm in the propofol group(12.5%)was significantly lower than those insevoflurane and dexmedetomidine groups(30%and 32.5%,respectively)(P<0.05).Conclusion Sevoflurane and propofol aresafe and suitable for anesthesia induction in children below 3 years of age undergoing diagnostic FOB and can achieve bettersedative effect and lower the incidences of cough and respiratory complications as compared with dexmedetomidine.

Using X Social Networks (formerly Twitter) and web news mining to predict the measles outbreak

Measles,an infectious disease caused by the measles virus,remains a significant public health concern worldwide due to its highly contagious nature and potential for severe complications[1].In addition to symptoms such as high fever,cough,Koplik spots,and rash,measles can lead to serious complications including pneumonia and myocarditis,particularly in vulnerable populations such as young children[1,2].

Self-repairing Al_(2)O_(3)-TiO_(2)coatings fabricated through plasma electrolytic oxidation with various cathodic pulse parameters

The influence of cathodic pulse parameters was evaluated on plasma electrolytic oxidation(PEO)coatings grown on 7075 aluminum alloy in a silicate-based electrolyte containing potassium titanyl oxalate(PTO)using pulsed bipolar waveforms with various cathodic duty cycles and cathodic current densities.The coatings were characterized by SEM,EDS,and XRD.EIS was applied to investigate the electrochemical properties.It was observed that the increase of cathodic duty cycle and cathodic current density from 20%and 6 A/dm^(2) to 40%and 12 A/dm^(2) enhances the growth rate of the inner layer from 0.22 to 0.75μm/min.Adding PTO into the bath showed a fortifying effect on influence of the cathodic pulse and the mentioned change of cathodic pulse parameters,resulting in an increase of the inner layer growth rate from 0.25 to 1.10μm/min.Based on EDS analysis,Si and Ti were incorporated dominantly in the upper parts of the coatings.XRD technique merely detectedγ-Al_(2)O_(3),and there were no detectable peaks related to Ti and Si compounds.However,the EIS results confirmed that the incorporation of Ti^(4+)into alumina changed the electronic properties of the coating.The coatings obtained from the bath containing PTO using the bipolar waveforms with a cathodic duty cycle of 40%and current density values higher than 6 A/dm^(2) showed highly appropriate electrochemical behavior during 240 d of immersion due to an efficient repairing mechanism.Regarding the effects of studied parameters on the coating properties,the roles of cathodic pulse parameters and PTO in the PEO process were highlighted.

A Novel Method of Deinterleaving Radar Pulse Sequences Based on a Modified DBSCAN Algorithm

A modified DBSCAN algorithm is presented for deinterleaving of radar pulses in modern EW environments.A main characteristic of the proposed method is that using only time of arrival of pulses,the method can sort the pulses efficiently.Other PDW information such as rise time,carrier frequency,pulse width,modulation on pulse,fall time and direction of arrival are not required.To identify the valid PRIs in a set of interleaved pulses,an innovative modification of the DBSCAN algorithm is introduced which is accurate and easy to implement.The proposed method determines valid PRIs more accurately and neglects the spurious ones more efficiently as compared to the classical histogram based algorithms such as SDIF.Furthermore,without specifying any input parameter,the proposed method can deinterleave radar pulses while up to 30%jitter is present in the associated PRI.The accuracy and efficiency of the proposed method are verified by computer simulations and real data results.Experimental simulations are based on different real and operational scenarios where the presence of missing and spurious pulses are also considered.So,the simulation results can be of practical significance.

Numerical simulation of fatigue crack propagation in heterogeneous geomaterials under varied loads using displacement discontinuity method

Heterogeneous brittle geomaterials are highly susceptible to cyclic loads.They contain inherent flaws and cracks that grow under fatigue loads and lead to failure.This study presents a numerical model for analyzing fatigue in these materials based on the two-dimensional(2D)boundary element method and linear elastic fracture mechanics.The process is formulated by coupling the displacement discontinuity method with the incorporation technique of dissimilar regions and the governing equations of fatigue.The heterogeneous media are assumed to consist of materials with different properties,and the interfaces are assumed to be completely bonded.In addition,the domains include multiple cracks exposed to constant and variable amplitude cyclic loads.The stress intensity factor is a crucial parameter in fatigue analysis,which is determined using the displacement field around crack tips.An incremental crack growth scheme is applied to calculating the fatigue life.The growth rate values are employed to estimate the length of crack extension when there are multiple cracks.The interaction between cracks is considered,which also includes the coalescence phenomenon.Finally,various structures under different cyclic loads are examined to evaluate the accuracy of this method.The results demonstrate the efficiency of the proposed approach in modeling fatigue crack growth and life estimation.The behavior of life curves for the heterogeneous domain was as expected.These curves illustrate the breakpoints caused by utilizing discrete incremental life equations.At these points,the trend of the curves changed with the material properties and fatigue characteristics of the new material around the crack tips.

Determine the most appropriate strategy for groundwater management in arid and semi-arid regions, Abhar Plain, Iran

Due to growing demand and reduction of water resources and increasing pollution of water,driven by dramatic population and economic growth, arid and semi-arid land's imminent water problems are nowadays aggravating. This study aims to determine the most appropriate management strategies for balancing the Abhar plain aquifer using the SWOT coupled with AHP technique. The results indicate that weaknesses prevail over strengths as well as threats over opportunities. The placement in the quarter of weaknesses-threats with a defensive strategy indicates the critical condition of the Abhar plain aquifer. The most appropriate solutions to achieve the goal of balancing the groundwater were prioritized by AHP method. According to results, improper management of water consumption with a weight of 72.5% is the most destructive factor in reducing groundwater resources. Among the types of consumption, the effect of an agricultural factor carries a weight of 74.2%. The exploitation of illegal wells, overdraft of exploitation license provisions of wells, reduction of precipitation and traditional irrigation methods were selected as the destructive factors causing the deteriration of groundwater resources. Also, with filling the illegal wells,changing the type of cultivation and greenhouse crops cultivation, installing a smart water meter,observance the provisions of the water exploitation license, implementing integrated pressurized irrigation systems, benefiting from suitable climatic conditions and geographical location for cultivating and developing the low-water use species and industries and on the other hand, with implementing artificial recharge to control the surface water resources and reduce abstraction from groundwater aquifers, the adverse trend of Abhar Plain groundwater resources can be controlled.

Polysaccharides-based pyrite depressants for green flotation separation:An overview

Froth flotation is an essential processing technique for upgrading low-grade ores.Flotation separation would not be efficient without chemical surfactants(collectors,depressants,frothers,etc.).Depressants play a critical role in the selective separation of minerals in that they deactivate unfavorable mineral surfaces and hinder them from floating into the flotation concentration zone.Pyrite is the most common and challenging sulfide gangue,and its conventional depressants could be highly harmful to nature and humans.Therefore,using available,affordable,eco-friendly polymers to assist or replace hazardous reagents is mandatory for a green transition.Polysaccharide-based(starch,dextrin,carboxymethyl cellulose,guar gum,etc.)polymers are one of the most used biodegradable depressant groups for pyrite depression.Despite the satisfactory flotation results obtained using these eco-friendly depressants,several gaps still need to be addressed,specifically in investigating surface interactions,adsorption mechanisms,and parameters affecting their depression performance.As a unique approach,this review comprehensively discussed previously conducted studies on pyrite depression with polysaccharide-based reagents.Additionally,practical suggestions have been provided for future assessments and developments of polysaccharide-based depressants,which pave the way to green flotation.This robust review also explored the depression efficiency and various adsorption aspects of naturally derived depressants on the pyrite surface to create a possible universal trend for each biodegradable depressant derivative.

Control and Treatment of Bone Cancer: A Novel Theoretical Study

The human body has symmetric bones.This paper uses control engineering concepts to design a suitable controller to synchronize two symmetric bones of the human body to control and treat bone cancer.A Nonsingular Terminal Sliding Mode Control(NTSMC)method will be employed to design the proposed control inputs.The control inputs can be the chemical drugs that can be used to treat bone cancer.The dynamical equations of bone cancer will be used to apply the designed control method and test it.For testing the designed controller,Simulink/MATLAB software will be used.The proposed controller is chattering-free,robust against uncertainties and external disturbances,and finite-time stable in the control engineering view.Bone cancer will be treated for almost one year using the proposed control method.

Numerical modelling of stress analysis around rectangular tunnels with large discontinuities(fault) by a hybridized indirect BEM

Tunnels are one of the major transportation routes to pass mountains and difficult geological conditions. The behavior of these structures is significantly influenced by rock mass and discontinuities. Orientation of discontinuities is one of the most important geometrical parameters affecting discontinuities behavior. The effect of large discontinuities(faults) behavior on a jointed medium around rectangular tunnels is studied. A hybridized indirect boundary element code named TFSDDM(fictitious stress displacement discontinuity method) is used to study the stress distribution around the tunnels excavated in jointed rock masses. The code uses advantages of both fictitious stress and displacement discontinuity methods to analyze discontinuity effects more accurately. Results show that the dip angle of discontinuities has significant effect on stress distribution around the tunnel. It is also shown that increase in the discontinuities dip angle located in the roof will result in decrease in tensile stress of the roof. Stresses reaches to 8 MPa in the roof while due to dilation effect they reach up to 13 MPa.

Numerical analysis of confinement effect on crack propagation mechanism from a flaw in a pre-cracked rock under compression

In many situations rocks are subjected to biaxial loading and the failure process is controlled by the lateral confinement stresses. The importance of confinement stresses has been recognized in the literature by many researchers, in particular, its influence on strength and on the angle of fracture, but still there is not a clear description for the influence of confining stress on the crack propagation mechanism of rocks. This paper presents a numerical pro- cedure for the analysis of crack propagation in rock-like ma- terials under compressive biaxial loads. Several numerical simulations of biaxial tests on the rock specimen have been carried out by a bonded particle model （BPM） and the influ- ence of confinement on the mechanism of crack propagation from a single flaw in rock specimens is studied. For this purpose, several biaxial compressive tests on rectangular spec- imens under different confinement stresses were modeled in （2 dimensional particle flow code） PFC2D. The results show that wing cracks initiate perpendicular to the flaw and trend toward the direction of major stress, however, when the lat- eral stresses increase, this initiation angle gets wider. Also it is concluded that in addition to the material type, the initiation direction of the secondary cracks depends on confine- ment stresses, too. Besides, it is understood that secondary cracks may be produced from both tensile and shear mechanisms.

Modeling and analysis of piezoelectric beam with periodically variable cross-sections for vibration energy harvesting

A bimorph piezoelectric beam with periodically variable cross-sections is used for the vibration energy harvesting. The effects of two geometrical parameters on the first band gap of this periodic beam are investigated by the generalized differential quadrature rule （GDQR） method. The GDQR method is also used to calculate the forced vibration response of the beam and voltage of each piezoelectric layer when the beam is subject to a sinusoidal base excitation. Results obtained from the analytical method are compared with those obtained from the finite element simulation with ANSYS, and good agreement is found. The voltage output of this periodic beam over its first band gap is calculated and compared with the voltage output of the uniform piezoelectric beam. It is concluded that this periodic beam has three advantages over the uniform piezoelectric beam, i.e., generating more voltage outputs over a wide frequency range, absorbing vibration, and being less weight.

Cracks coalescence mechanism and cracks propagation paths in rock-like specimens containing pre-existing random cracks under compression

The mechanism of cracks propagation and cracks coalescence due to compressive loading of the brittle substances containing pre-existing cracks （flaws） was modeled experimentally using specially made rock-like specimens from Portland Pozzolana Cement （PPC）. The breakage process of the specimens was studied by inserting single and double flaws with different inclination angles at the center and applying uniaxial compressive stress at both ends of the specimen. The first crack was oriented at 50＆#176; from the horizontal direction and kept constant throughout the analysis while the orientation of the second crack was changed. It is experimentally observed that the wing cracks are produced at the first stage of loading and start their propagation toward the direction of uniaxial compressive loading. The secondary cracks may also be produced in form of quasi-coplanar and/or oblique cracks in a stable manner. The secondary cracks may eventually continue their propagation in the direction of maximum principle stress. These experimental works were also simulated numerically by a modified higher order displacement discontinuity method and the cracks propagation and cracks coalescence were studied based on Mode I and Mode II stress intensity factors （SIFs）. It is concluded that the wing cracks initiation stresses for the specimens change from 11.3 to 14.1 MPain the case of numerical simulations and from 7.3 to 13.8 MPa in the case of experimental works. It is observed that cracks coalescence stresses change from 21.8 to 25.3 MPa and from 19.5 to 21.8 MPa in the numerical and experimental analyses, respectively. Comparing some of the numerical and experimental results with those recently cited in the literature validates the results obtained by the proposed study. Finally, a numerical simulation was accomplished to study the effect of confining pressure on the crack propagation process, showing that the SIFs increase and the crack initiation angles change in this case.

Application of artificial neural networks to the prediction of tunnel boring machine penetration rate

Rate of penetration of a Tunnel Boring Machine(TBM) in a rock environment is generally a key parameter for the successful accomplishment of a tunneling project.This paper presents the results of a study into the application of an Artificial Neural Network(ANN) technique for modeling the penetration rate of tunnel boring machines.A database,including actual,measured TBM penetration rates,uniaxial compressive strengths of the rock,the distance between planes of weakness in the rock mass and rock quality designation was established.Data collected from three different TBM projects(the Queens Water Tunnel,USA,the Karaj-Tehran water transfer tunnel,Iran,and the Gilgel Gibe II hydroelectric project,Ethiopia).A five-layer ANN was found to be optimum,with an architecture of three neurons in the input layer,9,7 and 3 neurons in the first,second and third hidden layers,respectively,and one neuron in the output layer.The correlation coefficient determined for penetration rate predicted by the ANN was 0.94.

Entropy squeezing and atomic inversion in the K-photon Jaynes–Cummings model in the presence of the Stark shift and a Kerr medium:A full nonlinear approach

The interaction between a two-level atom and a single-mode field in the k-photon Jaynes-Cummings model （JCM） in the presence of the Stark shift and a Kerr medium is studied. All terms in the Hamiltonian, such as the single-mode field, its interaction with the atom, the contribution of the Stark shift and the Kerr medium effects are considered to be f-deformed. In particular, the effect of the initial state of the radiation field on the dynamical evolution of some physical properties such as atomic inversion and entropy squeezing are investigated by considering different initial field states （coherent, squeezed and thermal states）.

Classification and assessment of rock mass parameters in Choghart iron mine using P-wave velocity

Engineering rock mass classification,based on empirical relations between rock mass parameters and engineering applications,is commonly used in rock engineering and forms the basis for designing rock structures.The basic data required may be obtained from visual observation and laboratory or field tests.However,owing to the discontinuous and variable nature of rock masses,it is difficult for rock engineers to directly obtain the specific design parameters needed.As an alternative,the use of geophysical methods in geomechanics such as seismography may largely address this problem.In this study,25 seismic profiles with the total length of 543 m have been scanned to determine the geomechanical properties of the rock mass in blocks Ⅰ,Ⅲ and Ⅳ-2 of the Choghart iron mine.Moreover,rock joint measurements and sampling for laboratory tests were conducted.The results show that the rock mass rating（RMR） and Q values have a close relation with P-wave velocity parameters,including P-wave velocity in field(V;).P-wave velocity in the laboratory(V;) and the ratio of V;V;(i.e.K;= V;/V;.However,Q value,totally,has greater correlation coefficient and less error than the RMR,In addition,rock mass parameters including rock quality designation（RQD）,uniaxial compressive strength（UCS）,joint roughness coefficient（JRC） and Schmidt number（RN） show close relationship with P-wave velocity.An equation based on these parameters was obtained to estimate the P-wave velocity in the rock mass with a correlation coefficient of 91%.The velocities in two orthogonal directions and the results of joint study show that the wave velocity anisotropy in rock mass may be used as an efficient tool to assess the strong and weak directions in rock mass.

Dosimetry calculations of involved and noninvolved organs in proton therapy of liver cancer:a simulation study

Radiation for targeting liver tumors can be challenging because of the damage that it can cause to sensitive organs such as heart and kidney.To calculate the dose received by noninvolved organs,a modeling of the patient’s entire body is necessary.Therefore,in this study,a human Oak Ridge National Laboratory-Medical Internal Radiation Dose phantom was used for liver proton therapy simulation.The results show that the optimum proton energy interval covering the whole tumor was in the range of 90-120 MeV.A spread-out Bragg peak was built by adding Bragg peaks to cover the liver tumor volume,and beam parameters recommended by the International Commission on Radiation Units and Measurements(ICRU) were evaluated.The flux of secondary particles was calculated on the surface of the tumor,and two-dimensional dose distributions for protons,neutrons and photons were shown.Finally,the total doses of protons,photons and neutrons in tumor and 14 noninvolved organs were calculated.The results indicated that the ratio of received dose to the normal tissue of the liver concerning the spherical tumor of 2 cm in radius was approximately0.01.This ratio for organs such as gall bladder,heart and kidney was approximately 8.4×10-5,5.1×10-5 and2.34×10-5.Secondary particles such as neutrons andphotons deposit their energies to organs located far from the treatment volume,thus increasing the risk of secondary cancers.The research results indicated that the secondary particles dose was quite small in liver proton therapy.All the calculations were performed using Monte Carlo N-Particle Transport Code (MCNP).

Fracture analyses of different pre-holed concrete specimens under compression

Crack propagation processes in specially prepared concrete discs and rectangular specimens containing a single cylindrical hole or multiple holes of varying diameters have been studied both experimentally and numerically. In this research, the cracks coalescence paths in Brazilian disc and rectangular specimens made from rock-like material containing multi-holes are investigated. These concrete specimens are specially prepared from an appropriate mixture of Portland Pozzolana Cement （PPC）, fine sands, and water. The pre-holed Brazilian discs and rectangular specimens are experimentally tested under compression. The breakage load in the ring type disc specimens containing an axial hole with varying diameters is measured and the distribution of the induced lateral stress is obtained. The mechanism of cracks propagation in the wall of the ring type specimens is also stud- ied. In the case of multi-hole Brazilian disc and rectangular specimens, the cracks propagation and cracks coalescence are also investigated. These experiments are numerically modeled by a modified higher order displacement discontinuity method. It has been shown that the corresponding experimental and numerical results are in good agreement with each other. The results presented in this research vali date the accuracy and applicability of these crack analyses procedures.

Numerical evaluation of passive control of shock wave/boundary layer interaction on NACA0012 airfoil using jagged wall

Shock formation due to flow compressibility and its interaction with boundary layers has adverse effects on aerodynamic characteristics, such as drag increase and flow separation. The objective of this paper is to appraise the practicability of weakening shock waves and, hence, reducing the wave drag in transonic flight regime using a two-dimensional jagged wall and thereby to gain an appropriate jagged wall shape for future empirical study. Different shapes of the jagged wall, including rectangular, circular, and triangular shapes, were employed. The numerical method was validated by experimental and numerical studies involving transonic flow over the NACA0012 airfoil, and the results presented here closely match previous experimental and numerical results. The impact of parameters, including shape and the length-to-spacing ratio of a jagged wall, was studied on aerodynamic forces and flow field. The results revealed that applying a jagged wall method on the upper surface of an airfoil changes the shock structure significantly and disintegrates it, which in turn leads to a decrease in wave drag. It was also found that the maximum drag coefficient decrease of around 17 % occurs with a triangular shape, while the maximum increase in aerodynamic efficiency（lift-to-drag ratio）of around 10 % happens with a rectangular shape at an angle of attack of 2.26？.

悬浮固化液相微萃取-高效液相色谱法测定人血浆和尿样中的卡巴咪嗪（英文）

Solidified floating organic drop microextraction(SFODME)in combination with high performance liquid chromatography was used for separation/preconcentration and determination of carbamazepine(CBZ)in human plasma and urine samples.Parameters that affect the extraction efficiency such as the type and volume of extraction solvent,ionic strength,sodium hydroxide concentration,stirring rate,sample volume and extraction time,were investigated and optimized.Under the optimum conditions(extraction solvent,40μL of 1-undecanol;sodium hydroxide concentration,1 mol/L;temperature,50℃;stirring speed,400 r/min;sample volume,8 mL;sodium chloride concentration,3%(w/v)and extraction time,60 min)the calibration curve was found to be linear in the mass concentration range of 0.4-700.0μg/L.The limit of detection(LOD)was 0.1μg/L and the relative standard deviation(RSD)for six replicate extraction and determination of carbamazepine at 100μg/L level was found to be 4.1%.The method was successfully applied to the determination of CBZ in human plasma and urine samples.