Research on the control technology of medium-length hole blasting fragmentation in underground mine

The scalloped medium-length hole blasting mining method used in Dahongshan Copper Mine accounted for more than 61%of the total amount of mining,but the large boulder yield restricted the intensity of ore supply for mines,and the average boulder yield was as high as 22.7%.In order to develop the mine production efficiency,the circular medium-length hole blasting technology was proposed and field tests were carried out.The test results showed that circular medium-length hole blasting mining can reduce the average boulder yield to 10.3%.Compared with the traditional scalloped medium-length hole blasting mining,the average boulder yield was decreased by 12.4%.The daily yield of ore for the panel on duty was increased by 152.29 t,and the growth rate was 51.1%.The new technology can reduce the time for the handling of boulder and the consumption of explosives and detonators for recrushing,and increase the efficiency of mining while reduce the mining cost,which has received good blasting effects.

Characteristics and mechanisms of strain waves generated in rock by cylindrical explosive charges

A superposing principle, by suitably adding the strain waves from a number of concentrated explosive charges to approximate the waves generated by a cylindrical charge based on the strain wave of a point or small spherical explosive charge generated in rock, is used to further study the triggering time of strain gauges installed in radial direction at same distances but different positions surrounding a cylindrical explosive charge in rock. The duration of the first compression phase and peak value of strain wave, and furthermore, their differences are analyzed and some explanations are given. Besides that, the gauge orientation in which the maximum peak value occurs is also discussed. At last, the effect of velocity of detonation(V.O.D.) of a cylindrical explosive charge on the strain waves generated in the surrounding rock is taken as key research and the pattern of peak amplitude of a strain wave varies with the V.O.D. is likely to have been found.

3D structure parameterization design and modeling for irregular structure of stope bottom

Stope mining design is a very important and complicated task in daily production design and technical management of an underground mine.Based on workface technology and human-computer interaction technology,this study introduces a method of 3D parametric design for the irregular structure of stope bottoms,and focuses on solving technical problems in surface modeling of stope bottom structure.Optimization of the minimum span length algorithm(MSLA) and the shortest path search algorithm(SPSA) is conducted to solve the problem of contour-line based instant modeling of stope bottom structures,which makes possible the 3D parametric design for irregular structure of stope bottom.Implementation process and relevant methods of the proposed algorithms are also presented.Feasibility and reliability of the proposed modeling method are testified in a case study.In practice,the proposed 3 D parameterization design method for irregular structure stope bottom proves to be very helpful to precise 3D parametric design.This method is capable of contributing to improved efficiency and precision of stope design,and is worthy of promotion.

A new method of block shape classification

The shapes of block within the rock mass have an important effect on the rock properties, so it＇s very important to evaluate the shapes of rock fragmentation and to determine the geometric characteristics distribution of the block. The previous methods to classify rock block shape are based on the assumption that a block shape is approximately orthogonal, which is acceptable in only a few rock masses. This paper proposes a new method for block shape classification using triangular diagram together with parameters of co-linearity e and volume coefficient K, which combines the shape categorization with block volume for statistical analysis. Rock block equivalent size calculation methods based on block shape is proposed and the block cumulative percentage of total volume statistical analysis is given. In order to verify this block shape classification method, three ideal rock masses with approximately orthogonal joint sets have been generated and simulated.