In the process of milling the half-open impeller, the milling force ACTS on the half-open impeller will cause the machining deformation error of the half-open impeller. The impeller material studied in this paper is 7...In the process of milling the half-open impeller, the milling force ACTS on the half-open impeller will cause the machining deformation error of the half-open impeller. The impeller material studied in this paper is 7050-t7451 aluminum alloy, whose elastic modulus is 70.3 GPa, with low stiffness. Therefore, during milling, it is easy to cause elastic deformation of the cutter, thus causing machining errors and reducing machining surface quality. In addition, due to the low stiffness of blade surface, the deformation of blade surface is much larger than that of hub surface. Therefore, this paper only studies the deformation law of blade surface in the process of milling.展开更多
Gas pressurized fan speed control and remote monitoring was achieved based on three sets of gas pressure MM440 frequency converter control system, through the Profibus-DP network transmission of exchange data and sign...Gas pressurized fan speed control and remote monitoring was achieved based on three sets of gas pressure MM440 frequency converter control system, through the Profibus-DP network transmission of exchange data and signal instructions. In operation, one converter which adopted ＂ power-off reset＂ has broken down, so as to cause two other gas pressurized frequency converter tripping. This paper proposed method to achieve capture and process failures, and application to converter control system. The result shows that the present method solves the fault, improves the system operation stability and meets the requirement of production.展开更多
文摘In the process of milling the half-open impeller, the milling force ACTS on the half-open impeller will cause the machining deformation error of the half-open impeller. The impeller material studied in this paper is 7050-t7451 aluminum alloy, whose elastic modulus is 70.3 GPa, with low stiffness. Therefore, during milling, it is easy to cause elastic deformation of the cutter, thus causing machining errors and reducing machining surface quality. In addition, due to the low stiffness of blade surface, the deformation of blade surface is much larger than that of hub surface. Therefore, this paper only studies the deformation law of blade surface in the process of milling.
文摘Gas pressurized fan speed control and remote monitoring was achieved based on three sets of gas pressure MM440 frequency converter control system, through the Profibus-DP network transmission of exchange data and signal instructions. In operation, one converter which adopted ＂ power-off reset＂ has broken down, so as to cause two other gas pressurized frequency converter tripping. This paper proposed method to achieve capture and process failures, and application to converter control system. The result shows that the present method solves the fault, improves the system operation stability and meets the requirement of production.
