期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
钎焊工艺参数对复合翅片−微通道管接头焊角尺寸和显微组织的影响
1
作者 J.C.GUÍA-TELLO M.I.PECH-CANUL +1 位作者 E.TRUJILLO-VÁZQUEZ M.A.PECH-CANUL 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2020年第12期3240-3253,共14页
研究钎焊连接微型多端口铝管和AA4343/AA3003/AA4343翅片,模拟汽车热交换器核心的微型组件,并优化钎焊条件。考虑5种工艺参数,用Taguchi法设计实验,目的是使钎焊接头的焊角尺寸最大化,因为焊角尺寸对钎焊接头的热完整性和力学性能有重... 研究钎焊连接微型多端口铝管和AA4343/AA3003/AA4343翅片,模拟汽车热交换器核心的微型组件,并优化钎焊条件。考虑5种工艺参数,用Taguchi法设计实验,目的是使钎焊接头的焊角尺寸最大化,因为焊角尺寸对钎焊接头的热完整性和力学性能有重要影响。采用金相显微镜测量钎焊接头的焊角长度,通过统计分析获得工艺参数的最佳值(峰值温度、保温时间、加热速率、微通道管类型和焊剂)。在95%置信水平下,焊角长度的变化受钎焊峰值温度(77%)、保温时间(15%)和加热速率(7%)的影响最为显著。预测的最大焊角长度为(152±11)μm,并得到实验验证。对管−翅片接头的显微组织分析表明,峰值温度和保温时间的变化只影响焊角共晶区的大小,而对组成相的性质和成分无影响。 展开更多
关键词 钎焊 复合翅片 Taguchi法 焊角尺寸 显微组织 峰值温度 优化
下载PDF
Photoluminescence characteristics of soft PZT 53/47 ceramic doped at A and/or B sites 被引量:2
2
作者 M.D.DURRUTHY-RODRíGUEZ J.J.GERVACIO-ARCINIEGA +1 位作者 M.HERNáNDEZ-GARCíA J.M.YánEZ-LIMóN 《Journal of Advanced Ceramics》 SCIE CSCD 2018年第2期109-116,共8页
This study presents the photoluminescence characteristics of the PZT 53/47 system doped at A and/or B sites, with Nb(PZTN), La(PLZT), and Nb–La(PLZTN) in the concentration range from 0.2 to 1.0 molar fraction. The in... This study presents the photoluminescence characteristics of the PZT 53/47 system doped at A and/or B sites, with Nb(PZTN), La(PLZT), and Nb–La(PLZTN) in the concentration range from 0.2 to 1.0 molar fraction. The intensity of the emission bands of the system PZTN is two orders higher than the intensity of the emission bands of the systems PLZT and PLZTN, and these emission bands are located at 1.73 eV(718 nm), 2.56 eV(485 nm), and 2.93 eV(424 nm). The origin of the luminescence in these systems is associated with lead and oxygen vacancies produced during the sintering process. The results from X-ray diffraction(XRD) show a mixture of rhombohedral and tetragonal phases. The system PZTN shows a higher tetragonal phase concentration, while PLZT and PLZTN systems show a higher rhombohedral phase concentration. The cell volume shows an increase with dopant concentration only in the case of the PLZTN system. The band gap energy shows a small variation in the PZTN and PLZTN cases around 3.0 eV, a close value to the band gap energy of the pure PZT 53/47 sample. The system PLZT shows an increasing behavior until 4.41 eV for the higher dopant concentration. 展开更多
关键词 PHOTOLUMINESCENCE PZT ceramics band structure X-ray diffraction(XRD)
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部