Genetic models of structural traps related to normal faults in the Putaohua Oilfield,Songliao Basin

The Putaohua Oilfield is a fault-prolific area and the faults have close relation with structural traps. The genetic models of the structural traps in the Putaohua Oilfield can be divided into two types： individual fault model and multi-fault interaction model. This is based on the description of displacement distribution of typical individual normal faults, the geometry of the footwall and hanging wall, and the analysis of the interaction between faults and the corresponding change in geometry when the faults grow. The individual fault model is that the displacement reaches a maximum at or near the center of fault and decreases toward the fault tips, so a half-graben is formed on the hanging wall of the fault and a half- anticline is formed on the footwall because of the isostatic process. The multi-fault interaction model is that during the growth of faults, they overlap and interact with each other, and accommodation zones are formed in the overlapping segments. The accommodation zones are favorable targets for hydrocarbon exploration, and the trap characteristics are dependent The multi-fault interaction model can be subdivided on the extent of overlap and occurrence of faults. into three types： synthetic accommodation zone, convergent accommodation zone and divergent accommodation zone. Hydrocarbon migration and accumulation models of each type have been developed. The hydrocarbon migration and accumulation models of the traps with different genetic models have their own characteristics in the different stages of fault growth.

Evaluation of reservoir environment by chemical properties of reservoir water‒A case study of Chang 6 reservoir in Ansai oilfield,Ordos Basin,China

The Ordos Basin is the largest continental multi-energy mineral basin in China,which is rich in coal,oil and gas,and uranium resources.The exploitation of mineral resources is closely related to reservoir water.The chemical properties of reservoir water are very important for reservoir evaluation and are significant indicators of the sealing of reservoir oil and gas resources.Therefore,the caprock of the Chang 6 reservoir in the Yanchang Formation was evaluated.The authors tested and analyzed the chemical characteristics of water samples selected from 30 wells in the Chang 6 reservoir of Ansai Oilfield in the Ordos Basin.The results show that the Chang 6 reservoir water in Ansai Oilfield is dominated by calcium-chloride water type with a sodium chloride coefficient of generally less than 0.5.The chloride magnesium coefficients are between 33.7 and 925.5,most of which are greater than 200.The desulfurization coefficients range from 0.21 to 13.4,with an average of 2.227.The carbonate balance coefficients are mainly concentrated below 0.01,with an average of 0.008.The calcium and magnesium coefficients are between 0.08 and 0.003,with an average of 0.01.Combined with the characteristics of the four-corner layout of the reservoir water,the above results show that the graphics are basically consistent.The study indicates that the Chang 6 reservoir in Ansai Oilfield in the Ordos Basin is a favorable block for oil and gas storage with good sealing properties,great preservation conditions of oil and gas,and high pore connectivity.

A World-Class Petrochemical Base will Come into Being in Daqing Oilfield

PetroChina Daqing Refining ＆ Chemical Company with a total investment of RMB 1.236 billion yuan is building a 300,000-ton polypropylene projet. The project has been handed over at present and put into trial production since May 30,2005, it has been come into stream fully in July. It is estimated that it can produce 110,000 tons polypropylene this year. Its marketing channel will be the unified sales network for all the branch companies in PetroChina chemical domain.

Polygonal faults in the Sanzhao sag of the Songliao basin:their significance in hydrocarbon accumulation

Polygonal faults,generally distributed in fine-grained sediments,are layer-bound faults and are important in hydrocarbon accumulation.Using 3D seismic data,we analyzed the plane and profile features of faults developed in the Qingshankou formation of the Sanzhao sag.We identified these faults as having typical features of polygonal faults:1) layer-bound;2) normal faults;3) slight fault displacements and steep in dip angles;4) multi-directional in strike and 5) a single fault has a short horizontal extension.In addition,these faults intersect each other and form polygons.These polygonal faults are the result from the combined action of compaction,volume contraction and episodic hydraulic fracturing,conditions favorable for oil/gas accumulation.They are the dominant channels for migration of fluids in the Qingshankou mudstone,forming a large number of fault-lithologic oil traps.Polygonal faults improve reservoirs.

The application of machine learning under supervision in identification of shale lamina combination types——A case study of Chang 7_(3)sub-member organic-rich shales in the Triassic Yanchang Formation,Ordos Basin,NW China

Organic rich laminated shale is one type of favorable reservoirs for exploration and development of continental shale oil in China.However,with limited geological data,it is difficult to predict the spatial distribution of laminated shale with great vertical heterogeneity.To solve this problem,taking Chang 73 sub-member in Yanchang Formation of Ordos Basin as an example,an idea of predicting lamina combinations by combining'conventional log data-mineral composition prediction-lamina combination type identification'has been worked out based on machine learning under supervision on the premise of adequate knowledge of characteristics of lamina mineral components.First,the main mineral components of the work area were figured out by analyzing core data,and the log data sensitive to changes of the mineral components was extracted;then machine learning was used to construct the mapping relationship between the two;based on the variations in mineral composition,the lamina combination types in typical wells of the research area were identified to verify the method.The results show the approach of'conventional log data-mineral composition prediction-lamina combination type identification'works well in identifying the types of shale lamina combinations.The approach was applied to Chang 73 sub-member in Yanchang Formation of Ordos Basin to find out planar distribution characteristics of the laminae.

Quantitative multiparameter prediction of fault-related fractures： a case study of the second member of the Funing Formation in the Jinhu Sag, Subei Basin

In this paper, the analysis of faults with different scales and orientations reveals that the distribution of fractures always develops toward a higher degree of similarity with faults, and a method for calculating the multiscale areal fracture density is proposed using fault-fracture self-similarity theory. Based on the fracture parameters observed in cores and thin sections, the initial apertures of multiscale fractures are determined using the constraint method with a skewed distribution. Through calculations and statistical analyses of in situ stresses in combination with physical experiments on rocks, a numerical geomechanical model of the in situ stress field is established. The fracture opening ability under the in situ stress field is subsequently analyzed. Combining the fracture aperture data and areal fracture density at different scales, a calculation model is proposed for the prediction of multiscale and multiperiod fracture parameters, including the fracture porosity, the magnitude and direction of maximum permeability and the flow conductivity. Finally, based on the relationships among fracture aperture,density, and the relative values of fracture porosity and permeability, a fracture development pattern is determined.

Modeling of kinetic characteristics of alkaline-surfactant-polymer-strengthened foams decay under ultrasonic standing wave

Foaming issues are encountered at the stages in crude oil production, transportation, processing, especially in chemical flooding enhanced oil recovery(EOR) oilfields. These accumulated foams would cause a lot of trouble for downstream operation. The destruction of foams under ultrasonic has been increasingly paying attention in the background of green oilfield development. This study focuses on the decay kinetic characteristics of alkaline-surfactant-polymer-strengthened foams under the ultrasonic standing wave.The performance of the diverse foams was characterized. A decay kinetic model incorporating the energy correlation was developed and validated. The factors that affect the decay kinetic characteristics were discussed. The results indicated that the collapse rate and the collapse volume fraction decreased when the foam size decreased, the gas-liquid ratio decreased and the surface tension increased. Ultrasonic standing wave parameters have a significant impact on the decay behavior of the foam. Both the ultrasonic frequency and ultrasonic amplitude were increased by 50%, the collapse volume fraction of foams increased by about 1.25 times in the identical irradiation time. The relative deviation between the measured results and the model prediction was less than 10%. The potential collapse mechanism was also explained using the principle of energy correlation of foam surface. This study is not only beneficial to provide a robust and rigorous way to defoam of produced liquid in the alkaline/surfactant/polymer(ASP)flooding EOR process but also meaningful to well understand the decay process of oil-based foams.

Multisourced CO_(2) Injection in Fan Delta Conglomerates and Its Influence on Reservoir Quality: Evidence from Carbonate Cements of the Baikouquan Formation of Mahu Sag, Junggar Basin, Northwestern China

Sandy-conglomerate reservoir has gradually become a major target of oil and gas exploration.Complex diagenetic process and diagenetic fluid play a significant role in affecting reservoir heterogeneity.Carbonate cements form at various stages of the diagenesis process and record various geological fluid information.Recently,one-billion-ton sandy conglomerate oil field was exposed in Triassic Baikouquan Formation,Mahu sag,Junggar Basin.Therefore,an integrated study applying casting thin sections,cathodeluminescence,fluorescence,carbon and oxygen stable isotopes,electronic probe microanalysis and aqueous fluid inclusions measurements was performed in order to identify the types of carbonate mineral and its representative diagenetic environment and discuss the influences of different CO_(2) injections on reservoir quality.The main findings are as follows:The reservoir is mainly composed of 70.33%conglomerate and 16.06%coarse-grained sandstone.They are characterized by low compositional maturity and abundant lithic debris.Four types carbonate cements are identified according to the petrological and geochemical characteristics,including two types of Mn-rich calcite,ferroan calcite,siderite and dawsonite.They display an unusual broad spectrum ofδ^(13)C values(-54.99‰to+8.8‰),suggesting both organic and inorganic CO_(2) injections.The δ^(13)C values of siderite are close to 0,and its formation is related to meteoric water.Theδ^(13)C values of ferroan calcite and the occurrence of dawsonite indicate the trace of inorganic mantle-derived magmatic fluids.Theδ^(13)C values and trace elements of Mn-rich calcite record the information of hydrocarbon-bearing fluids.The fluid inclusions measurement data and reservoir properties and oil-test data show that the oil content of reservoir is not only affected by the formation time of different cements,but also by the relative content of dissolution and cementation.For these reservoirs altered by carbonate cements,it does not cause poor oil-bearing due to blockage of secondary minerals.

NUMERICAL SIMULATIONS OF VISCOELASTIC FLOWS THROUGH ONE SLOT CHANNEL

In this article, the Modified Upper-Convected Maxwell equation （MUCM） is proposed. The viscoelastic polymer solution flow characteristics are described by the numerical method. The stream function contour, velocity contour and stress modulus contour of fluid in slot channel are drawn. The non-Newtonian power law property and viscoelasticity of MUCM fluid influence on the stream function are analyzed. The velocity contour move towards dead oil area with the viscoelasticity increase, flow area increase and the sweep area enlarges, so the sweep efficiency is enhanced.

FINITE VOLUME METHOD FOR SIMULATION OF VISCOELASTIC FLOW THROUGH A EXPANSION CHANNEL

A finite volume method for the numerical solution of viscoelastic flows is given. The flow of a differential Upper-Convected Maxwell （UCM） fluid through an abrupt expansion has been chosen as a prototype example. The conservation and constitutive equations are solved using the Finite Volume Method （FVM） in a staggered grid with an upwind scheme for the viscoelastic stresses and a hybrid scheme for the velocities. An enhanced-in-speed pressure-correction algorithm is used and a method for handling the source term in the momentum equations is employed. Improved accuracy is achieved by a special discretization of the boundary conditions. Stable solutions are obtained for higher Weissenberg number （We）, further extending the range of simulations with the FVM. Numerical results show the viscoelasticity of polymer solutions is the main factor influencing the sweeo efficiency.