This present work solves the problem of initial shape influence on transfer during convective drying. A characteristic dimension is found for the cubic, cylindrical and spherical-shaped samples of the sweet potato. Th...This present work solves the problem of initial shape influence on transfer during convective drying. A characteristic dimension is found for the cubic, cylindrical and spherical-shaped samples of the sweet potato. This characteristic dimension corresponds to the diameter D for the sphere, to the edge a for the cube and the diameter = height D = H for the cylinder. Unlike the sphere where this characteristic dimension is perfect, the cubic and cylindrical shapes have space factors which are, among other things, angles and borders. By fixing the same characteristic dimensions, we end up with overlapping curves, showing identical and uniform transfers.展开更多
A numerical approach to heat and mass transfer in a large water reservoir is presented. This water reservoir is likened to a parallelepiped reservoir whose vertical and lower walls are adiabatic and impermeable. The e...A numerical approach to heat and mass transfer in a large water reservoir is presented. This water reservoir is likened to a parallelepiped reservoir whose vertical and lower walls are adiabatic and impermeable. The equations that govern natural convection in water are solved by the finite volume method and Thomas’salgorithm. The adequacy between the velocity and pressure fields is ensured by the SIMPLE algorithm. We are going to evaluate the water losses by evaporation from three dams in the Nakanbé basin in Burkina Faso for a period of thirty years, that is to say from January 1, 1991, to March 15, 2020. The three dams have a rate of evaporation greater than 40% of the volume of water stored. Indeed the rate of evaporation in each dam increases with the water filling rate in the reservoir: we have observed the following results for each dam in the Nakanbé basin;for the date of 02/27/1988 to 03/13/2020., the Loumbila dam received a total volume of stored water of 22.02 Mm<sup>3</sup> and 10.57 Mm<sup>3</sup> as the total volume of water evaporated at the same date. At the Ouaga dam (2 + 3), it stored a water volume of 4.06 Mm<sup>3</sup> and evaporated 2.03 Mm<sup>3</sup> of its storage volume from 01/01/1988 to 05/07/2016. Finally, with regard to the Bagré dam, it stored 745.16 Mm<sup>3</sup> of water and 365.13 Mm<sup>3</sup> as the volume of water evaporated from 01/01/1993 to 03/31/2020.展开更多
The paper presents a one-dimensional simulation study of chalcopyrite Cu(In,Ga)Se2(CIGS)solar cells,where the effects of the variation of CIGS,CdS,and ZnO layers are presented.Additionlly the influence of the variatio...The paper presents a one-dimensional simulation study of chalcopyrite Cu(In,Ga)Se2(CIGS)solar cells,where the effects of the variation of CIGS,CdS,and ZnO layers are presented.Additionlly the influence of the variation of doping and the defects density of shallow uniform donors and acceptors types are also presented.The analyse of the simulation results shows that recombination inside the space charge region(SCR)decrease more our CIGS solar cell model performance.We also found that the electrical parameters increase with increasing CIGS absorber doping density exception of JSC values that reach their maximum at 1016cm-3 and decrease due to recombination of charge carriers in the p-n junction particularly the recombination inside the SCR.We also stressed the fact that the effects of shallow uniforme donor density is very low on the performance of our CIGS solar cell model is important because it will allow to control the width of space charge region from shallow uniform acceptors defect density that has a strong influence on the different electrical parameters.Yet,good optimization of performance of the CIGS-based solar cell necessarily passes though a good control of the space charge region width and will constitute a boosting perspective for the preparation of our next paper.We contact that the results obtained of the numerical simulation with SCAPS-1D show a good agreement comparatively of the literature results.The simulation of our CIGS solar cell presents best performances if the values of the absorber layer thickness is in the range of 0.02 to 0.03μm,the buffer layer thickness is in the range of 0.02 to 0.06μm and the defects density of shallow uniform acceptors types is in the range of 1015 to 1017cm-3.展开更多
This work is interested in solving the complex problem of understanding mass transfers in biological media. The contribution of the initial sample size is taken into account. Transfers are established more efficiently...This work is interested in solving the complex problem of understanding mass transfers in biological media. The contribution of the initial sample size is taken into account. Transfers are established more efficiently in small samples. Thus, from the first 50 minutes, the cubic sample at 1 cm stop is already at 50% while the sample at 4 cm edge is at about 90% of its initial water content. Likewise the shape is combined with the size. But it is revealed that if we fix similar characteristic dimensions, we can bypass the notion of initial shape. Thus the cubic samples 4 cm of edges. 4 cm diameter of spherical shape, 4 cm × 4 cm height-diameter cylindrical one, all dry identically.展开更多
In this paper, we perform experiments on the drying of widely consumed food products in Africa. Tomatoes and peppers are considered as products with a complex structure. Zucchini, cucumber, eggplant and cabbages are t...In this paper, we perform experiments on the drying of widely consumed food products in Africa. Tomatoes and peppers are considered as products with a complex structure. Zucchini, cucumber, eggplant and cabbages are the other products used in these drying experiments, having different intrinsic parameters. Most food products have three components, namely skin, flesh containing seeds and the central spongy structure, that do not have the same behavior during their convective drying. Skin is the component that significantly reduces drying while the flesh is easy to dry. By drying the samples considering their intrinsic parameters, one quickly realizes the complex nature of mass and heat transfers during the drying of biological products.展开更多
Residential photovoltaic (PV) systems connected to the grid are used for self-consumption. Any surplus production is fed into the grid and contributes to improving the voltage. Several techniques are developed to mode...Residential photovoltaic (PV) systems connected to the grid are used for self-consumption. Any surplus production is fed into the grid and contributes to improving the voltage. Several techniques are developed to model their connection. However, studies on methods of injecting energy production into the Low Voltage (LV) network are nowadays a problem. This paper proposes a mathematical model to determine the current to be injected and calculate each node’s voltage. The current equation is a recurrence relation with an initial condition. This initial condition is for the case of a single PV system connected to the LV grid. The equation can also be written in matrix form. Similarly, the voltage solution is a recurrence relation. It also has an initial condition for the first node. Both mathematical formulae with the proposed initial conditions are consistent and can be used for the determination of the current and voltage of the different nodes in the grid.展开更多
In the present work, the mass transfer characteristics, namely moisture diffusivity and moisture transfer coefficient of “Violet de Galmi” variety of onions were evaluated using the analytical model. Onions were dri...In the present work, the mass transfer characteristics, namely moisture diffusivity and moisture transfer coefficient of “Violet de Galmi” variety of onions were evaluated using the analytical model. Onions were dried in a single layer at different temperatures (40℃, 50℃, 60℃, and 70℃) and for a relative humidity of drying air of 20%. The results showed a reasonably good agreement between the values predicted by the correlation and the experimental observations. This model computed the Biot number, effective moisture diffusivity, and mass transfer coefficient. Effective diffusion coefficient values are obtained between 0.2578 × 10<sup>-9</sup> m<sup>2</sup>·s<sup>-1</sup> and 0.5460 × 10<sup>-9</sup> m<sup>2</sup>·s<sup>-1</sup>. Mass transfer coefficients of “Violet de Galmi” onion drying vary between 3.37 × 10<sup>-7</sup> m·s<sup>-1</sup> and 13.38 × 10<sup>-7</sup> m·s<sup>-1</sup>. Numbers of mass transfer Biot are found between 0.9797 and 2.9397. The activation energy E<sub>a</sub> is 31.73 kJ·mol<sup>-1</sup>.展开更多
Living in a habitat with comfort is requested by all. Cinder block bricks have poor thermal properties, leading people to use fan heaters and air conditioners to regain comfort. To overcome this problem of thermal dis...Living in a habitat with comfort is requested by all. Cinder block bricks have poor thermal properties, leading people to use fan heaters and air conditioners to regain comfort. To overcome this problem of thermal discomfort in buildings, we used lightweight concrete such as foamed concrete which is a material that has improved thermal properties for thermal comfort. In addition, this material was compared with local materials used for the construction of buildings such as BTC, adobe and BLT mixed with binders. The results showed that foamed concrete is a material that has good thermal and mechanical properties compared to local materials mixed with binders. The foamed concrete having acceptable thermo-mechanical properties was that having a density of 930 kg/m<sup>3</sup>. It has a thermal resistance of 0.4 m<sup>2</sup>·K/W for a thickness of 20 cm. The foamed concrete having acceptable thermo-mechanical properties was that having a density of 930 kg/m3</sup>. It has a thermal resistance of 0.4 m2</sup>·K/W for a thickness of 20 cm. For sunshine on a daily cycle equal to 12 hours, the characteristic thickness achieved by this material is 7.29 cm. It also has a shallow depth of heat diffusion having a lower thickness than other materials. This shows that foamed concrete is a promising material for the construction of buildings.展开更多
The technique of supported liquid membranes was used to achieve the facilitated transport of Cr(III) ions, using tow amphiphilic carriers, the methyl cholate and resorcinarene. For prepared SLMs, toluene as organic ph...The technique of supported liquid membranes was used to achieve the facilitated transport of Cr(III) ions, using tow amphiphilic carriers, the methyl cholate and resorcinarene. For prepared SLMs, toluene as organic phase and film of polyvinylidene difluoride, as hydrophobic polymer support with 100 μm in thickness and 0.45 μm as the diameter of the pores. The macroscopic parameters (P and J0) on the transport of these ions were determined for different medium temperatures. For these different environments, the prepared SLMs were highly permeable and a clear evolution of these parameters was observed. The parameter J0 depended on the temperature according to the Arrhenius equation. The activation parameters, Ea, ΔH≠ and ΔS≠, for the transition state on the reaction of complex formation (ST) , were determined. To explain these results for this phenomenon, and achieve a better extraction of the substrate, a model based on the substrate complexation by the carrier and the diffusion of the formed complex (ST) was developed. The experimental results verify this model and determine the microscopic parameters (Kass and D*). These studies show that these parameters Kass and D* are specific to facilitated transport of Cr(III) ions by each of the carriers and they are changing significantly with temperature.展开更多
The aim of this work was to determine the characteristic dimension governing transfers during convective dryin</span></span><span style="white-space:normal;"><span style="font-famil...The aim of this work was to determine the characteristic dimension governing transfers during convective dryin</span></span><span style="white-space:normal;"><span style="font-family:"">g</span></span><span style="white-space:normal;"><span style="font-family:"">. Parallelepipedic and cylindrical form of sweet potato was used. For the parallelepipedic form P_L-l-e, the thickness e is set to 1</span></span><span style="white-space:normal;"><span style="font-family:""> </span></span><span style="white-space:normal;"><span style="font-family:"">cm while the length L and the width l are varying. The results show that the variation of the other dimensions other than the thickness e does not influence the transfers in a considerable way. The same observation is made for the cylindrical samples c_H-R by keeping the radius R constant. This present work therefore allows us to conclude that the thickness of the parallelepiped shaped samples and the radius of the cylindrical shapes, all being the smallest dimensions, characterize the transfers.展开更多
Accurately measuring meteorological visibility is an important factor in road, sea, rail, and air transportation safety, especially under visibility-reducing weather events. This paper deals with the application of Ma...Accurately measuring meteorological visibility is an important factor in road, sea, rail, and air transportation safety, especially under visibility-reducing weather events. This paper deals with the application of Machine Learning methods to estimate meteorological visibility in dusty conditions, from the power levels of commercial microwave links and weather data including temperature, dew point, wind speed, wind direction, and atmospheric pressure. Three well-known Machine Learning methods are investigated: Decision Trees, Random Forest, and Support Vector Machines. The correlation coefficient and the mean square error, between the visibility distances estimated by Machine Learning methods and those provided by Burkina Faso weather services are computed. Except for the SVM method, all the other methods give a correlation coefficient greater than 0.90. The Random Forest method presents the best result both in terms of correlation coefficient (0.97) and means square error (0.60). For this last method, the best variables that explain the model are selected by evaluating the weight of each variable in the model. The best performance is obtained by considering the attenuation of the microwave signal and the dew point.展开更多
In a context of climate change exacerbated by the increasing scarcity of fossil fuels, renewable energies, in particular photovoltaic solar energy, offer a promising alternative. Solar energy is non-polluting, globall...In a context of climate change exacerbated by the increasing scarcity of fossil fuels, renewable energies, in particular photovoltaic solar energy, offer a promising alternative. Solar energy is non-polluting, globally available and the most widely distributed resource on Earth. However, the intermittency of this energy source considerably limits its expansion. To solve this problem, storage techniques are being used, in particular, electrochemical storage using lithium-ion batteries. In this article, we will evaluate the performance of lithium-ion batteries when integrated into a photovoltaic grid. To do this, modelling and simulation of a photovoltaic system connected to a lithium-ion battery storage system will be carried out using MATLAB/Simulink software. A diagnostic of the energy consumption of the Kaya Polytechnic University Centre will be carried out, and the data will then be used in the simulator to observe the behaviour of the PV-Lion system. The results obtained indicate that lithium-ion batteries can effectively meet the centre’s energy demand. In addition, it was observed that lithium-ion batteries perform better under high energy demand than the other battery technologies studied. Successive storage systems with the same capacity but different battery technologies were compared. It was found that these storage systems can handle a maximum power of 4 × 10<sup>5</sup> W for lead-acid batteries, 6.5 × 10<sup>5</sup> W for nickel-cadmium batteries, 8.5 × 10<sup>5</sup> W for nickel-metal-hydride batteries, and more than 10 × 10<sup>5</sup> W for lithium-ion technology.展开更多
This scientific paper presents a study investigating the effects of defects at the CdS/CIGS and CdS/SDL interfaces on the performance of CIGS solar cells. The objective of this study is to analyze the influence of def...This scientific paper presents a study investigating the effects of defects at the CdS/CIGS and CdS/SDL interfaces on the performance of CIGS solar cells. The objective of this study is to analyze the influence of defects at the interface between the CdS buffer layer and the CIGS absorber, as well as the surface defect layer (SDL), on CIGS solar cell performance. The study explores three key aspects: the impact of the conduction band offset (CBO) at the CdS/CIGS interface, the effects of interface defects and defect density on performance, and the combined influence of CBO and defect density at the CdS/ SDL and SDL/CIGS interfaces. For interface defects not exceeding 10<sup>13</sup> cm<sup>-2</sup>, we obtained a good efficiency of 22.9% when -0.1 eV analyzing the quality of CdS/SDL and SDL/CIGS junctions, it appears that defects at the SDL/CIGS interface have very little impact on the performances of the CIGS solar cell. By optimizing the electrical parameters of the CdS/SDL interface defects, we achieved a conversion efficiency of 23.1% when -0.05 eV < CBO < 0.05 eV.展开更多
In this manuscript, we used the SCAPS-1D software to perform numerical simulations on a perovskite solar cell. These simulations were used to study the influence of certain parameters on the electrical behavior of the...In this manuscript, we used the SCAPS-1D software to perform numerical simulations on a perovskite solar cell. These simulations were used to study the influence of certain parameters on the electrical behavior of the cell. We have shown in this study that electron mobility is strongly influenced by the thickness of the absorber, since electron velocity is reduced by thickness. The influence of the defect density shows that above 10<sup>16</sup> cm<sup>-3</sup> all the electrical parameters are affected by the defects. The band discontinuity at the interface generally plays a crucial role in the charge transport phenomenon. The importance of this study is to enable the development of good quality perovskite solar cells, while taking into account the parameters that limit solar cell performance.展开更多
Colorless, incessant radon gas is notably the second most important cause of lung cancer after smoking in smokers and the first cause in non-smokers. Having little effect in the atmosphere, radon gas accumulates in co...Colorless, incessant radon gas is notably the second most important cause of lung cancer after smoking in smokers and the first cause in non-smokers. Having little effect in the atmosphere, radon gas accumulates in confined spaces. Therefore, the determination of radon concentrations inside residential buildings is very important to improve the health of the inhabitants. The objective of this research is to measure the concentration of radon in indoor air in residential areas of the city of Kaya and to assess the absorbed dose, the effective dose and the relative risk of lung cancer. In this study, the CORENTIUM AIR THINGS digital radon detector is used to determine the radon concentration in twenty-one houses in Kaya. The CORENTIUM AIR THINGS digital radon detector has been placed in each residential building for a minimum period of one week and the concentration values are read every 24 hours. This research revealed that the average concentration of radon was 28.47 Bq/m<sup>3</sup> in the residential areas of Kaya. The radon concentration in a house has been found to exceed 100 Bq/m<sup>3</sup>, which is the level authorized by the World Health Organization (WHO). In the long term, the absorbed dose varies from 0.118 mSv to 4.975 mSv and the effective dose is between 0.229 mSv and 12.002 mSv. In the short term, the absorbed dose varies between 0.095 mSv to 5.001 mSv and the effective dose is between 0.283 mSv to 11.935 mSv. The mean lung cancer relative risk (CPRR) from indoor exposure was 1.026. There is a need to raise awareness among the population of the city of Kaya on this issue and to take measures to reduce radon in homes when the concentrations are above the limit recommended by the WHO.展开更多
In this study, the material is okra, a cucurbitaceous largely consumed in West Africa and South Asia. The influence of the external air parameters on food drying with different size, maturity, shape of the material is...In this study, the material is okra, a cucurbitaceous largely consumed in West Africa and South Asia. The influence of the external air parameters on food drying with different size, maturity, shape of the material is considered by convective drying. So, the okra was cut in several parts according to its three characteristic zones, the basis, the middle of the okra and the extremity because the three parts of the vegetable have not the same resistances in transfers by convective drying. The maturity of the okra also has an influence. The okra dries faster in its younger or older age. Okra dries slowly when its maturity is convenient to be consumed. The drying duration of okra with the age of 1, 2, 3, 4 and 5 days is respectively 580, 780, 990, 1200 and 850 min. When we consider the three (matters) constituent of the okra: the skin, the seeds and the central material, the central matter dries faster. The diffusion coefficient was identified in all cases in order to compare the influence of those intrinsic properties of that food.展开更多
In this paper, we propose an optimized process for farm product convective drying. Above and beyond the influence of the air parameters on foodstuff convective drying, this work shows that product internal parameters ...In this paper, we propose an optimized process for farm product convective drying. Above and beyond the influence of the air parameters on foodstuff convective drying, this work shows that product internal parameters and drying proceedings must be taken into account during the evaluation of their convective drying. Results indicate that okra maturity influences its convective drying. It dries faster when it is too young or when it is advanced age. Drying time of okra of 1, 2, 3, 4 and 5 days old is respectively 580 min, 780 min, 990 min, 1200 min and 850 min. Also, one observes that considering okra on its three zones according it length, i.e. its base, middle and extremity parts have not the same resistance to transfers during convective drying. These three zones have respectively 400 min, 520 min and 600 min of drying time. Okra cut reveals a major importance on its convective drying evaluation. The longitudinal cut di-viding okra on four parts, sliced with 5 mm and 10 mm of thickness and the whole okra put respectively 150 min, 200 min, 280 min and 400 min for their drying. At last, three (03) different constituents of okra, namely, the skin, the seeds and central material behave differently during convective drying. The drying time of the central material, the seeds and the skin is about 70 min, 150 min and 190 min respectively, against 400 min for the whole okra.展开更多
In this study, the authors investigated the performance of different buffer layers through the electrical parameters such as J<sub>sc</sub>, V<sub>oc</sub>, QE and η of the quaternary system C...In this study, the authors investigated the performance of different buffer layers through the electrical parameters such as J<sub>sc</sub>, V<sub>oc</sub>, QE and η of the quaternary system Cu(In,Ga)Se<sub>2</sub> solar cells. The performance of Cu(In,Ga)Se<sub>2</sub>solar cells has been modeled and numerically simulated by using the SCAPS- 1D device simulation tool. The cells with a ZnSe, Zn(O,S) and (Zn,Mg)O buffer layers were compared with the reference CdS buffer layer. The investigation of ZnSe, Zn(O, S) and (Zn,Mg)O-based cells to substitute the traditional CdS in the future shows that the ZnSe-buffer layer is a potential material to replace CdS, which revealed the best efficiency of 20.76%, the other electrical parameters are: J<sub>SC</sub> = 34.6 mA/cm<sup>2</sup>, V<sub>OC</sub> = 0.76 V and FF = 79.6%. The losses as a function of the temperature are estimated at 0.1%/K, among all kinds of buffer layers studied. We have also shown that the use of a high band-gap buffer layer is necessary to obtain a better short-circuit current density J<sub>SC</sub>. From our results, we note that the chalcogenide solar cells with Zn-based alternative buffer layer have almost the same stability thatthe traditional CdS buffer layer solar cells have.展开更多
When the circuit breaker cuts the electric current, an electric arc is created between its electrodes. The success or failure of breaking the electric current by the circuit breaker depends strongly on the physico-che...When the circuit breaker cuts the electric current, an electric arc is created between its electrodes. The success or failure of breaking the electric current by the circuit breaker depends strongly on the physico-chemical properties of the electric arc created, such as the composition of which depends on the material of the electrical contacts. In this work, we determine the equilibrium composition of the electric arc in the low voltage air circuit breaker with silver tin dioxide alloy contacts, in a temperature range from 500 K to 15,000 K and at atmospheric pressure. We use the Gibbs free energy minimization method and develop a computer code to determine the equilibrium composition of the created plasma. The analysis of the results obtained shows that O<sub>2</sub> particles with a dissociation energy of 5.114 eV, NO with a dissociation energy of 6.503 eV, and N<sub>2</sub> dissociation 9.756 eV dissociate around 3500 K, 5000 K, and 7500 K, respectively. We note that the electro-neutrality is established between the electrons and the cations: Ag<sup>+</sup> and NO<sup>+</sup>, for temperatures lower than 6500 K. For temperatures higher than 6500 K, the electro-neutrality is established between the electrons and the cations: N<sup>+</sup>, O<sup>+</sup>, and Ag<sup>+</sup>. The numerical density of the electrons increases when the proportion of the vapor of the electrical contacts increases in the mixture, in particular for temperatures lower than 11,000 K.展开更多
文摘This present work solves the problem of initial shape influence on transfer during convective drying. A characteristic dimension is found for the cubic, cylindrical and spherical-shaped samples of the sweet potato. This characteristic dimension corresponds to the diameter D for the sphere, to the edge a for the cube and the diameter = height D = H for the cylinder. Unlike the sphere where this characteristic dimension is perfect, the cubic and cylindrical shapes have space factors which are, among other things, angles and borders. By fixing the same characteristic dimensions, we end up with overlapping curves, showing identical and uniform transfers.
文摘A numerical approach to heat and mass transfer in a large water reservoir is presented. This water reservoir is likened to a parallelepiped reservoir whose vertical and lower walls are adiabatic and impermeable. The equations that govern natural convection in water are solved by the finite volume method and Thomas’salgorithm. The adequacy between the velocity and pressure fields is ensured by the SIMPLE algorithm. We are going to evaluate the water losses by evaporation from three dams in the Nakanbé basin in Burkina Faso for a period of thirty years, that is to say from January 1, 1991, to March 15, 2020. The three dams have a rate of evaporation greater than 40% of the volume of water stored. Indeed the rate of evaporation in each dam increases with the water filling rate in the reservoir: we have observed the following results for each dam in the Nakanbé basin;for the date of 02/27/1988 to 03/13/2020., the Loumbila dam received a total volume of stored water of 22.02 Mm<sup>3</sup> and 10.57 Mm<sup>3</sup> as the total volume of water evaporated at the same date. At the Ouaga dam (2 + 3), it stored a water volume of 4.06 Mm<sup>3</sup> and evaporated 2.03 Mm<sup>3</sup> of its storage volume from 01/01/1988 to 05/07/2016. Finally, with regard to the Bagré dam, it stored 745.16 Mm<sup>3</sup> of water and 365.13 Mm<sup>3</sup> as the volume of water evaporated from 01/01/1993 to 03/31/2020.
文摘The paper presents a one-dimensional simulation study of chalcopyrite Cu(In,Ga)Se2(CIGS)solar cells,where the effects of the variation of CIGS,CdS,and ZnO layers are presented.Additionlly the influence of the variation of doping and the defects density of shallow uniform donors and acceptors types are also presented.The analyse of the simulation results shows that recombination inside the space charge region(SCR)decrease more our CIGS solar cell model performance.We also found that the electrical parameters increase with increasing CIGS absorber doping density exception of JSC values that reach their maximum at 1016cm-3 and decrease due to recombination of charge carriers in the p-n junction particularly the recombination inside the SCR.We also stressed the fact that the effects of shallow uniforme donor density is very low on the performance of our CIGS solar cell model is important because it will allow to control the width of space charge region from shallow uniform acceptors defect density that has a strong influence on the different electrical parameters.Yet,good optimization of performance of the CIGS-based solar cell necessarily passes though a good control of the space charge region width and will constitute a boosting perspective for the preparation of our next paper.We contact that the results obtained of the numerical simulation with SCAPS-1D show a good agreement comparatively of the literature results.The simulation of our CIGS solar cell presents best performances if the values of the absorber layer thickness is in the range of 0.02 to 0.03μm,the buffer layer thickness is in the range of 0.02 to 0.06μm and the defects density of shallow uniform acceptors types is in the range of 1015 to 1017cm-3.
文摘This work is interested in solving the complex problem of understanding mass transfers in biological media. The contribution of the initial sample size is taken into account. Transfers are established more efficiently in small samples. Thus, from the first 50 minutes, the cubic sample at 1 cm stop is already at 50% while the sample at 4 cm edge is at about 90% of its initial water content. Likewise the shape is combined with the size. But it is revealed that if we fix similar characteristic dimensions, we can bypass the notion of initial shape. Thus the cubic samples 4 cm of edges. 4 cm diameter of spherical shape, 4 cm × 4 cm height-diameter cylindrical one, all dry identically.
文摘In this paper, we perform experiments on the drying of widely consumed food products in Africa. Tomatoes and peppers are considered as products with a complex structure. Zucchini, cucumber, eggplant and cabbages are the other products used in these drying experiments, having different intrinsic parameters. Most food products have three components, namely skin, flesh containing seeds and the central spongy structure, that do not have the same behavior during their convective drying. Skin is the component that significantly reduces drying while the flesh is easy to dry. By drying the samples considering their intrinsic parameters, one quickly realizes the complex nature of mass and heat transfers during the drying of biological products.
文摘Residential photovoltaic (PV) systems connected to the grid are used for self-consumption. Any surplus production is fed into the grid and contributes to improving the voltage. Several techniques are developed to model their connection. However, studies on methods of injecting energy production into the Low Voltage (LV) network are nowadays a problem. This paper proposes a mathematical model to determine the current to be injected and calculate each node’s voltage. The current equation is a recurrence relation with an initial condition. This initial condition is for the case of a single PV system connected to the LV grid. The equation can also be written in matrix form. Similarly, the voltage solution is a recurrence relation. It also has an initial condition for the first node. Both mathematical formulae with the proposed initial conditions are consistent and can be used for the determination of the current and voltage of the different nodes in the grid.
文摘In the present work, the mass transfer characteristics, namely moisture diffusivity and moisture transfer coefficient of “Violet de Galmi” variety of onions were evaluated using the analytical model. Onions were dried in a single layer at different temperatures (40℃, 50℃, 60℃, and 70℃) and for a relative humidity of drying air of 20%. The results showed a reasonably good agreement between the values predicted by the correlation and the experimental observations. This model computed the Biot number, effective moisture diffusivity, and mass transfer coefficient. Effective diffusion coefficient values are obtained between 0.2578 × 10<sup>-9</sup> m<sup>2</sup>·s<sup>-1</sup> and 0.5460 × 10<sup>-9</sup> m<sup>2</sup>·s<sup>-1</sup>. Mass transfer coefficients of “Violet de Galmi” onion drying vary between 3.37 × 10<sup>-7</sup> m·s<sup>-1</sup> and 13.38 × 10<sup>-7</sup> m·s<sup>-1</sup>. Numbers of mass transfer Biot are found between 0.9797 and 2.9397. The activation energy E<sub>a</sub> is 31.73 kJ·mol<sup>-1</sup>.
文摘Living in a habitat with comfort is requested by all. Cinder block bricks have poor thermal properties, leading people to use fan heaters and air conditioners to regain comfort. To overcome this problem of thermal discomfort in buildings, we used lightweight concrete such as foamed concrete which is a material that has improved thermal properties for thermal comfort. In addition, this material was compared with local materials used for the construction of buildings such as BTC, adobe and BLT mixed with binders. The results showed that foamed concrete is a material that has good thermal and mechanical properties compared to local materials mixed with binders. The foamed concrete having acceptable thermo-mechanical properties was that having a density of 930 kg/m<sup>3</sup>. It has a thermal resistance of 0.4 m<sup>2</sup>·K/W for a thickness of 20 cm. The foamed concrete having acceptable thermo-mechanical properties was that having a density of 930 kg/m3</sup>. It has a thermal resistance of 0.4 m2</sup>·K/W for a thickness of 20 cm. For sunshine on a daily cycle equal to 12 hours, the characteristic thickness achieved by this material is 7.29 cm. It also has a shallow depth of heat diffusion having a lower thickness than other materials. This shows that foamed concrete is a promising material for the construction of buildings.
基金All authors thank the Agence Universitaire de la Fran-cophonie(AUF)for financial support(PCSI 59113PS 014)Professor Jean-François Verchère from the University of Rouen(France)for his advice,fruitful dis-cussions,strong encouragement and exemplary coopera-tion.
文摘The technique of supported liquid membranes was used to achieve the facilitated transport of Cr(III) ions, using tow amphiphilic carriers, the methyl cholate and resorcinarene. For prepared SLMs, toluene as organic phase and film of polyvinylidene difluoride, as hydrophobic polymer support with 100 μm in thickness and 0.45 μm as the diameter of the pores. The macroscopic parameters (P and J0) on the transport of these ions were determined for different medium temperatures. For these different environments, the prepared SLMs were highly permeable and a clear evolution of these parameters was observed. The parameter J0 depended on the temperature according to the Arrhenius equation. The activation parameters, Ea, ΔH≠ and ΔS≠, for the transition state on the reaction of complex formation (ST) , were determined. To explain these results for this phenomenon, and achieve a better extraction of the substrate, a model based on the substrate complexation by the carrier and the diffusion of the formed complex (ST) was developed. The experimental results verify this model and determine the microscopic parameters (Kass and D*). These studies show that these parameters Kass and D* are specific to facilitated transport of Cr(III) ions by each of the carriers and they are changing significantly with temperature.
文摘The aim of this work was to determine the characteristic dimension governing transfers during convective dryin</span></span><span style="white-space:normal;"><span style="font-family:"">g</span></span><span style="white-space:normal;"><span style="font-family:"">. Parallelepipedic and cylindrical form of sweet potato was used. For the parallelepipedic form P_L-l-e, the thickness e is set to 1</span></span><span style="white-space:normal;"><span style="font-family:""> </span></span><span style="white-space:normal;"><span style="font-family:"">cm while the length L and the width l are varying. The results show that the variation of the other dimensions other than the thickness e does not influence the transfers in a considerable way. The same observation is made for the cylindrical samples c_H-R by keeping the radius R constant. This present work therefore allows us to conclude that the thickness of the parallelepiped shaped samples and the radius of the cylindrical shapes, all being the smallest dimensions, characterize the transfers.
文摘Accurately measuring meteorological visibility is an important factor in road, sea, rail, and air transportation safety, especially under visibility-reducing weather events. This paper deals with the application of Machine Learning methods to estimate meteorological visibility in dusty conditions, from the power levels of commercial microwave links and weather data including temperature, dew point, wind speed, wind direction, and atmospheric pressure. Three well-known Machine Learning methods are investigated: Decision Trees, Random Forest, and Support Vector Machines. The correlation coefficient and the mean square error, between the visibility distances estimated by Machine Learning methods and those provided by Burkina Faso weather services are computed. Except for the SVM method, all the other methods give a correlation coefficient greater than 0.90. The Random Forest method presents the best result both in terms of correlation coefficient (0.97) and means square error (0.60). For this last method, the best variables that explain the model are selected by evaluating the weight of each variable in the model. The best performance is obtained by considering the attenuation of the microwave signal and the dew point.
文摘In a context of climate change exacerbated by the increasing scarcity of fossil fuels, renewable energies, in particular photovoltaic solar energy, offer a promising alternative. Solar energy is non-polluting, globally available and the most widely distributed resource on Earth. However, the intermittency of this energy source considerably limits its expansion. To solve this problem, storage techniques are being used, in particular, electrochemical storage using lithium-ion batteries. In this article, we will evaluate the performance of lithium-ion batteries when integrated into a photovoltaic grid. To do this, modelling and simulation of a photovoltaic system connected to a lithium-ion battery storage system will be carried out using MATLAB/Simulink software. A diagnostic of the energy consumption of the Kaya Polytechnic University Centre will be carried out, and the data will then be used in the simulator to observe the behaviour of the PV-Lion system. The results obtained indicate that lithium-ion batteries can effectively meet the centre’s energy demand. In addition, it was observed that lithium-ion batteries perform better under high energy demand than the other battery technologies studied. Successive storage systems with the same capacity but different battery technologies were compared. It was found that these storage systems can handle a maximum power of 4 × 10<sup>5</sup> W for lead-acid batteries, 6.5 × 10<sup>5</sup> W for nickel-cadmium batteries, 8.5 × 10<sup>5</sup> W for nickel-metal-hydride batteries, and more than 10 × 10<sup>5</sup> W for lithium-ion technology.
文摘This scientific paper presents a study investigating the effects of defects at the CdS/CIGS and CdS/SDL interfaces on the performance of CIGS solar cells. The objective of this study is to analyze the influence of defects at the interface between the CdS buffer layer and the CIGS absorber, as well as the surface defect layer (SDL), on CIGS solar cell performance. The study explores three key aspects: the impact of the conduction band offset (CBO) at the CdS/CIGS interface, the effects of interface defects and defect density on performance, and the combined influence of CBO and defect density at the CdS/ SDL and SDL/CIGS interfaces. For interface defects not exceeding 10<sup>13</sup> cm<sup>-2</sup>, we obtained a good efficiency of 22.9% when -0.1 eV analyzing the quality of CdS/SDL and SDL/CIGS junctions, it appears that defects at the SDL/CIGS interface have very little impact on the performances of the CIGS solar cell. By optimizing the electrical parameters of the CdS/SDL interface defects, we achieved a conversion efficiency of 23.1% when -0.05 eV < CBO < 0.05 eV.
文摘In this manuscript, we used the SCAPS-1D software to perform numerical simulations on a perovskite solar cell. These simulations were used to study the influence of certain parameters on the electrical behavior of the cell. We have shown in this study that electron mobility is strongly influenced by the thickness of the absorber, since electron velocity is reduced by thickness. The influence of the defect density shows that above 10<sup>16</sup> cm<sup>-3</sup> all the electrical parameters are affected by the defects. The band discontinuity at the interface generally plays a crucial role in the charge transport phenomenon. The importance of this study is to enable the development of good quality perovskite solar cells, while taking into account the parameters that limit solar cell performance.
文摘Colorless, incessant radon gas is notably the second most important cause of lung cancer after smoking in smokers and the first cause in non-smokers. Having little effect in the atmosphere, radon gas accumulates in confined spaces. Therefore, the determination of radon concentrations inside residential buildings is very important to improve the health of the inhabitants. The objective of this research is to measure the concentration of radon in indoor air in residential areas of the city of Kaya and to assess the absorbed dose, the effective dose and the relative risk of lung cancer. In this study, the CORENTIUM AIR THINGS digital radon detector is used to determine the radon concentration in twenty-one houses in Kaya. The CORENTIUM AIR THINGS digital radon detector has been placed in each residential building for a minimum period of one week and the concentration values are read every 24 hours. This research revealed that the average concentration of radon was 28.47 Bq/m<sup>3</sup> in the residential areas of Kaya. The radon concentration in a house has been found to exceed 100 Bq/m<sup>3</sup>, which is the level authorized by the World Health Organization (WHO). In the long term, the absorbed dose varies from 0.118 mSv to 4.975 mSv and the effective dose is between 0.229 mSv and 12.002 mSv. In the short term, the absorbed dose varies between 0.095 mSv to 5.001 mSv and the effective dose is between 0.283 mSv to 11.935 mSv. The mean lung cancer relative risk (CPRR) from indoor exposure was 1.026. There is a need to raise awareness among the population of the city of Kaya on this issue and to take measures to reduce radon in homes when the concentrations are above the limit recommended by the WHO.
文摘In this study, the material is okra, a cucurbitaceous largely consumed in West Africa and South Asia. The influence of the external air parameters on food drying with different size, maturity, shape of the material is considered by convective drying. So, the okra was cut in several parts according to its three characteristic zones, the basis, the middle of the okra and the extremity because the three parts of the vegetable have not the same resistances in transfers by convective drying. The maturity of the okra also has an influence. The okra dries faster in its younger or older age. Okra dries slowly when its maturity is convenient to be consumed. The drying duration of okra with the age of 1, 2, 3, 4 and 5 days is respectively 580, 780, 990, 1200 and 850 min. When we consider the three (matters) constituent of the okra: the skin, the seeds and the central material, the central matter dries faster. The diffusion coefficient was identified in all cases in order to compare the influence of those intrinsic properties of that food.
文摘In this paper, we propose an optimized process for farm product convective drying. Above and beyond the influence of the air parameters on foodstuff convective drying, this work shows that product internal parameters and drying proceedings must be taken into account during the evaluation of their convective drying. Results indicate that okra maturity influences its convective drying. It dries faster when it is too young or when it is advanced age. Drying time of okra of 1, 2, 3, 4 and 5 days old is respectively 580 min, 780 min, 990 min, 1200 min and 850 min. Also, one observes that considering okra on its three zones according it length, i.e. its base, middle and extremity parts have not the same resistance to transfers during convective drying. These three zones have respectively 400 min, 520 min and 600 min of drying time. Okra cut reveals a major importance on its convective drying evaluation. The longitudinal cut di-viding okra on four parts, sliced with 5 mm and 10 mm of thickness and the whole okra put respectively 150 min, 200 min, 280 min and 400 min for their drying. At last, three (03) different constituents of okra, namely, the skin, the seeds and central material behave differently during convective drying. The drying time of the central material, the seeds and the skin is about 70 min, 150 min and 190 min respectively, against 400 min for the whole okra.
文摘In this study, the authors investigated the performance of different buffer layers through the electrical parameters such as J<sub>sc</sub>, V<sub>oc</sub>, QE and η of the quaternary system Cu(In,Ga)Se<sub>2</sub> solar cells. The performance of Cu(In,Ga)Se<sub>2</sub>solar cells has been modeled and numerically simulated by using the SCAPS- 1D device simulation tool. The cells with a ZnSe, Zn(O,S) and (Zn,Mg)O buffer layers were compared with the reference CdS buffer layer. The investigation of ZnSe, Zn(O, S) and (Zn,Mg)O-based cells to substitute the traditional CdS in the future shows that the ZnSe-buffer layer is a potential material to replace CdS, which revealed the best efficiency of 20.76%, the other electrical parameters are: J<sub>SC</sub> = 34.6 mA/cm<sup>2</sup>, V<sub>OC</sub> = 0.76 V and FF = 79.6%. The losses as a function of the temperature are estimated at 0.1%/K, among all kinds of buffer layers studied. We have also shown that the use of a high band-gap buffer layer is necessary to obtain a better short-circuit current density J<sub>SC</sub>. From our results, we note that the chalcogenide solar cells with Zn-based alternative buffer layer have almost the same stability thatthe traditional CdS buffer layer solar cells have.
文摘When the circuit breaker cuts the electric current, an electric arc is created between its electrodes. The success or failure of breaking the electric current by the circuit breaker depends strongly on the physico-chemical properties of the electric arc created, such as the composition of which depends on the material of the electrical contacts. In this work, we determine the equilibrium composition of the electric arc in the low voltage air circuit breaker with silver tin dioxide alloy contacts, in a temperature range from 500 K to 15,000 K and at atmospheric pressure. We use the Gibbs free energy minimization method and develop a computer code to determine the equilibrium composition of the created plasma. The analysis of the results obtained shows that O<sub>2</sub> particles with a dissociation energy of 5.114 eV, NO with a dissociation energy of 6.503 eV, and N<sub>2</sub> dissociation 9.756 eV dissociate around 3500 K, 5000 K, and 7500 K, respectively. We note that the electro-neutrality is established between the electrons and the cations: Ag<sup>+</sup> and NO<sup>+</sup>, for temperatures lower than 6500 K. For temperatures higher than 6500 K, the electro-neutrality is established between the electrons and the cations: N<sup>+</sup>, O<sup>+</sup>, and Ag<sup>+</sup>. The numerical density of the electrons increases when the proportion of the vapor of the electrical contacts increases in the mixture, in particular for temperatures lower than 11,000 K.