Collision between particles plays an important role in determining the hydrodynamic characteristics of gas-solid flow in a fluidized bed.In the present work,earlier work(Loha,Chattopadhyay.& Chatterjee,2013) was e...Collision between particles plays an important role in determining the hydrodynamic characteristics of gas-solid flow in a fluidized bed.In the present work,earlier work(Loha,Chattopadhyay.& Chatterjee,2013) was extended to study the effect of the elasticity of particle collision on the hydrodynamic behavior of a bubbling fluidized bed filled with 530-μm particles.The Eulerian-Eulerian two-fluid model was used to simulate the hydrodynamics of the bubbling fluidized bed.where the solid-phase properties were calculated by applying the kinetic theory of granular flow.To investigate the effect of the elasticity of particle collision,different values of the coefficient of restitution were applied in the simulation and their effects were studied in detail.Simulations were performed for two different solid-phase wall boundary conditions.No bubble formation was observed for perfectly elastic collision.The bubble formation started as soon as the coefficient of restitution was set below 1.0,and the space occupied by bubbles in the bed increased with a decrease in the coefficient of restitution.Simulation results were also compared with experimental data available in the literature,and good agreement was found for coefficients of restitution of 0.95 and 0.99.展开更多
Transient numerical simulations are carried out to investigate the liquid-gas interfacecharacteristics associated with liquid film cooling flows.A two-dimensional axisymmetricmulti-phase numerical model using finite v...Transient numerical simulations are carried out to investigate the liquid-gas interfacecharacteristics associated with liquid film cooling flows.A two-dimensional axisymmetricmulti-phase numerical model using finite volume formulation is developed.The model hasbeen validated against available experimental data for liquid-film cooling flows inside tubes.The model has been used to predict the interface characteristics for a variety of imposedparameters and momentum flux ratios under cold flow conditions wherein both the coolant andmainstream are maintained at the same temperature.Disturbance waves are observed at theliquid-gas interface for coolant flows above a critical value and after a finite distance from theinlet.The distance toward the wave inception point increased with the increase of momentumflux ratio.However,at higher momentum flux ratios,the properties of the disturbance wavesdid not vary significantly.The parameters related to the liquid-gas interface waves,namely,wave velocity,frequency,amplitude and wave length have been analyzed in detail.Analysisindicates that the liquid entrainment is due to the shearing of the disturbance wave crest.展开更多
文摘Collision between particles plays an important role in determining the hydrodynamic characteristics of gas-solid flow in a fluidized bed.In the present work,earlier work(Loha,Chattopadhyay.& Chatterjee,2013) was extended to study the effect of the elasticity of particle collision on the hydrodynamic behavior of a bubbling fluidized bed filled with 530-μm particles.The Eulerian-Eulerian two-fluid model was used to simulate the hydrodynamics of the bubbling fluidized bed.where the solid-phase properties were calculated by applying the kinetic theory of granular flow.To investigate the effect of the elasticity of particle collision,different values of the coefficient of restitution were applied in the simulation and their effects were studied in detail.Simulations were performed for two different solid-phase wall boundary conditions.No bubble formation was observed for perfectly elastic collision.The bubble formation started as soon as the coefficient of restitution was set below 1.0,and the space occupied by bubbles in the bed increased with a decrease in the coefficient of restitution.Simulation results were also compared with experimental data available in the literature,and good agreement was found for coefficients of restitution of 0.95 and 0.99.
文摘Transient numerical simulations are carried out to investigate the liquid-gas interfacecharacteristics associated with liquid film cooling flows.A two-dimensional axisymmetricmulti-phase numerical model using finite volume formulation is developed.The model hasbeen validated against available experimental data for liquid-film cooling flows inside tubes.The model has been used to predict the interface characteristics for a variety of imposedparameters and momentum flux ratios under cold flow conditions wherein both the coolant andmainstream are maintained at the same temperature.Disturbance waves are observed at theliquid-gas interface for coolant flows above a critical value and after a finite distance from theinlet.The distance toward the wave inception point increased with the increase of momentumflux ratio.However,at higher momentum flux ratios,the properties of the disturbance wavesdid not vary significantly.The parameters related to the liquid-gas interface waves,namely,wave velocity,frequency,amplitude and wave length have been analyzed in detail.Analysisindicates that the liquid entrainment is due to the shearing of the disturbance wave crest.
